A/c and the battery in the middle of the screen icons

Similar Questions

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• My HP envy does not stop and the screen is black

  I tried to restart my laptop but it will not turn off and the screen is black. Help, I don't know what to do!

  Hey Raacbell,

  The ENVY Ultrabook series has a built in battery which can not be easily removed without disassembly.

  If you need to replace the battery due to regular wear of the Lithium-Ion battery on the road, you can see how to replace from page 35 here: HP Envy 4 - Maintenance and Service of Guide.

  Thank you!

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code.

  IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code to return. I hit Cancel on the stop screen or type my password the password screen and it goes back to the screen, I was on. I did a reset, all settings, but not him erase all content and settings. I went all day without any problems and an ago he started to panic. I took the cover of a few days ago thinking it might be the cause of the problem by pressing the power button, that wasn't the problem. Can someone give me some advice on what could be the problem?

  I have not updated my phone to the new IOS

• My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

  My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

  How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Satellite Pro 6000 freezes and the screen is weird random pattern

  Hello

  I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

  I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

  Hello

  It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
  Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

• Trying to iCloud iPhone backup 6 + and tried to 'Cancel backup' now the wheels are turning and the screen is frozen. How can I stop?

  Looking for a backup initiated from my iPhone 6 s +.  Needed to leave before it's over, so I typed "cancel backup' which doesn't seem to work.  Six hours later the wheels always turn around. Message on the screen said "Turning on Backup" - it turns also around and the screen seems frozen I can't return to set after I selected "iCloud" How can I fix it?

  Have you tried to restart the phone.

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• the iPad beeps and the screen blinks when it is plugged

  DIIAP keeps a sound signal and the screen flashes when I plug

  Hello

  Need more information plug in what sector / pc?

  See you soon

  Brian

• just got a new lenovo y50 and the screen does not come

  Hello.. I had a y50 lenovo a day ago. I loaded and when I turned it on the custom screen shows something... it won't turn... Only the lights on the keyboard upwards
  Thank you

  thx for your help... .but I guessed it was a connection problem... so when I opened, I find that the cable between the motherboard and the screen was loose... then it worked, I saw the language and region settings

• Green continuous flashing Belkin router and the computer icon is amber

  Original title: belkin router

  My belkin router keeps blinking green and the computer icon is amber what should I do

  Hi cindaboo,

  1. what icon on the computer are you talking about?

  2. are you able to connect to the internet?

  3 - is the icon on the computer or the router that is amber?

  4. has this configuration has worked on the computer?

  Visit our Microsoft answers feedback Forum and let us know what you think.