A CASE statement in summary
Hi all!
A work colleague published some analysis I built and messed up some column formulas, I did. I am trying to summarize this case statement:
CASES WHERE "claim Cmplt - various. "" Number special String ' AS ' % ~ 109 ~ %' THEN 'D1BC' WHEN ' claim Cmplt - various. "" Number special String ' IS NULL OR "claim Cmplt - various. "" String of the special issue "LOVE NOT ' % ~ 100 ~ %" OR "claim Cmplt - various" "." " Chain of the special issue"do NOT LIKE ' % ~ 99 ~ %" OR "claim Cmplt - various" "." " Chain of the special issue"do NOT LIKE ' % ~ 49 ~ %' THEN 'VSC' END
The formula works like this. When I go to SUM it, I'm missing something... you can identify what it is?
SUM (CASE WHERE "claim Cmplt - various".) "" Number special String ' AS ' % ~ 109 ~ %' THEN 'D1BC' WHEN ' claim Cmplt - various "". "" "Number special String ' IS NULL OR" claim Cmplt - various. "" String of the special issue "LOVE NOT ' % ~ 100 ~ %" OR "claim Cmplt - various" "." " Chain of the special issue"do NOT LIKE ' % ~ 99 ~ %" OR "claim Cmplt - various" "." " (Chain of the special issue"do NOT LIKE ' % ~ 49 ~ %' THEN 'VSC' END)
Thanks gurus!
Don't know what you expect here by using sum. Money is not the columns of type char, but you can go for the County that would work.
hope you guessed it.
Mark as correct
Tags: Business Intelligence
Similar Questions
-
I can't get the CASE statement to work on my 39gII. Anyone else out there there is a bit of luck? I keep getting syntax errors.
It does not in the current official version of Setpbember.
-
Use the control of timing DAQmx as input in case statement
Hello
I'm building a VI aquire sampled under tension of a sensor in continuous mode or finished. I was going to do this, use a box with a cable of the sample mode of the VI DAQmx calendar entry to the terminal State, the idea being that I couldn't aeither a while looping the case for continuous or simple acquisition according to the setting of this command.
However, instead of the sample mode provided for in the case of the case statement, I just get 1 and 0.
It's a good way to achieve this, and if so how can I get my case structure working properly?
Thank you
Dave
Hi Dave,.
Apologies - I consider that the error is from the data acquisition function? I forgot that she was using the sample entry mode.
Perhaps, then, it will be preferable to continue using the control of the ring - cases will be numbered and will correspond to the numeric value of the selection of the ring (i.e. finite samples = 0). I have attached a small example if we know not.
Moreover, the structure of the case cannot automatically fill for each case, in which case you can right click on the structure of the case-> add the case after.
Best regards
-
call the statement box inside the case statement
I am writing a program which requires me to run a statement box inside another case statement. Although this sounds like a simple thing, I need to be able to call the case statement using a sequence structure, where s1 sends the true value to the case, s2, a fake. Then I need to record the results of this instruction box in a text file. Attatched is a simplified version of what I'm trying to do. Please note that the way my program runs may not call the case statement without using a sequence structure, two nesting box instructions is not feasible. I hope someone out there can help me because I was stuck trying to find this for awhile.
Thank you
LVStudent wrote:
[...] I can't call the case statement without using a sequence structure
Yes you can. You just need to be smart.
LVStudent wrote:
I don't think I can use a state machine to fix this.
I think you probably can.
With respect to your original post. What are these s1 and s2 are you talking about? My opinion on the matter, it is that you want to select a case based on the values of several controls Boolean. If this is correct, I do this:
Build your Boolean controls in a table, convert the table number and insert it into the structure of your business. No button pressed = 0, s1 = only 1, s2 = only 2 both = 3. This works for Boolean values as much as you want and is an easy way to make a decision that depends on many entries.
-
Case statement is not spend.
Hello
I'm having a strange problem with a case statement. I'm passing is a Boolean value that is set to false, but the case statement never switches to the loop of "false". I have attached a word doc who did the screen has a step of this unique through being shot. The photo of the top has the case highlighted with the probe #8 beside him indicate 'False. ' In the lower screen shot is the very next step that highlights the outside circle while ' loop', but the case statement is always 'True '. Anyone seen this before?
Gary Tyrna
Hey Mello,
Well, I see what you're saying and you are right, the problem is the case statement works when highlight of execution. But I have a main case statement in the loop that either allows the state machine to execute a loop or hides them and that case is triggered for no steps to true or false. So that was the reason why I sent the first e-mail because I could see this case change, but not the smallest. But if this is the fix well I'll run with it and lets see case statement switch the highlight of the performance.
Thanks again.
Gary Tyrna
-
How can you change a menu drop-down menu in a case statement?
Hello
I'm trying a table find vi. This VI will be an existing xml file and once the user has selected access to its equipment, input, output and frequency it put all of these options in a string and search the XML for this exact table name and post it on one screen of output. The problem I have is my entry and exit selection must be a little different depending on the chosen equipment. I thought I could use an instruction box to change the options of selectable input and output, but I ran into snags a lot with it. For whenever I have to put a new drop of entry and exit in the drop-down menu in the case statement, he wants to put a new one in the front (I only want to enter and exit not only three I have two inputs and outputs hidden right now). I think I'm using the wrong case statement... Can someone help change my input and output, selectable options depending on the chosen equipment. Attached is my xml file, Array Find.vi (the original) and table Find_Test.vi (that's what I'm trying to change).
Thank you
dlovell
Hi dlovell,
A few changes in the attached VI:
Requirements/possible Solutions
- When the value of the equipment, do something
- Add the cases to the value of equipment change event
- Do something = decide what channels to write, to change the input and output strings
- Read material value changed
- Decision (case structure)
- Channel (same method as the previous mod)
Hope this helps
-
How to fill a table only if a case statement runs?
Hello. I want to have a while loop with a case statement. When the case is true, it should read the analog data each iteration of the while loop via Daqmx and store these values in a table. If the case is wrong, I don't want to read all the data or to store anything else in the table. When the loop is finished, I want to have this available table to write to a file or something. How can I go about it?
Search for a "shift register. This will hold your data. In the case of fake feed the data in the table back through without change. In the case of true add the new value in the table to "build the table" or even better "subset of the table to replace' for a defined table size.
-
How can I write a case statement if I want a case for x< 1.5; ="" a="" case="" for="" 1.5=""><= x="">=><= 3.7; ="" case="" for ="" 3.7="">=>< x="">< 7.2.....etc. ="" my="" input="" is="" a="" floating="">
Thank you.
You don't seem to have set rules on inclusion, but I often use the function in the range and Coerce in these cases.
-
Can I use a hexadecimal string with a case statement?
Simple question:
Can I enter a hexadecimal string to a case statement and have the case statement see it as hex?
I understand that I could convert the hexadecimal string to a number and then enter the hexadecimal number to the case statement but I am curious to know if I could have the case see the string itself as hex without this added feature.
Would be nice to not have to convert all my numbers throughout my code strings
Thank you
-Eric
How long are the strings? Since you mention convert in numbers, they are probably short and all of same length.
Are there different possible channels how?
Case header includes \-codes in the case of a label deal selector As string, so that should be enough for your use. For example this code turns the LED (.. .so that a simple string of "\00\00" of wiring would not be!)
(See also the last sentence of the "enumerated values" section of the help).
-
Case statement in the process Page
Request Express 3.2.1.00.11
I put the following code in an anonymous block (will return no error) for a process Page;
BEGIN INSERT INTO DAD_ASSESSMENT_REQUEST ( tenure_id , client_id ) VALUES ( :P10101_TENURE_ID , :P10101_CLIENT_ID ); END;
But when I put a statement case it throws the following error;
1 error has occurred ORA-06550: line 7, column 3: PL/SQL: ORA-01747: invalid user.table.column, table.column, or column specification ORA-06550: line 3, column 1: PL/SQL: SQL Statement ignored
BEGIN INSERT INTO DAD_ASSESSMENT_REQUEST ( tenure_id , client_id , (CASE WHEN (:P10101_MEASURE_OPTION = 'AREA') THEN estimated_area_ha WHEN (:P10101_MEASURE_OPTION = 'LINE') THEN estimated_length_km END) ) VALUES ( :P10101_TENURE_ID , :P10101_CLIENT_ID , :P10101_X ); END;
Why is this code not work and it is possible to use a case statement in a Page Apex process
Concerning
Ben
Benton says:
Request Express 3.2.1.00.11
I put the following code in an anonymous block (will return no error) for a process Page;
- BEGIN
- INSERT
- IN DAD_ASSESSMENT_REQUEST
- (tenure_id
- client_id
- )
- VALUES
- (: P10101_TENURE_ID)
- ,: P10101_CLIENT_ID
- );
- END;
But when I put a statement case it throws the following error;
- 1 error has occurred
- ORA-06550: line 7, column 3: PL/SQL: ORA-01747: specification user.table.column, table.column or invalid column ORA-06550: line 3, column 1: PL/SQL: statement ignored
- BEGIN
- INSERT
- IN DAD_ASSESSMENT_REQUEST
- (tenure_id
- client_id
- (CASE
- WHEN (: P10101_MEASURE_OPTION = 'SPACE') THEN estimated_area_ha
- WHEN (: P10101_MEASURE_OPTION = 'LINE') THEN estimated_length_km
- END)
- )
- VALUES
- (: P10101_TENURE_ID)
- ,: P10101_CLIENT_ID
- ,: P10101_X
- );
- END;
Why is this code not work and it is possible to use a case statement in a Page Apex process
Of course, it is possible to use a CASE statement or expression (it is the latter) in a page APEX process. However, it is not possible to use an invalid syntax while doing so. Part of a clause INSERT INTO can contain only static column names.
In general the SQL expressions (and also the bind variable, another cause frequent errors of syntax) can be used only in
- the projections of the SELECT queries and subqueries
- the right side of the disposals in the SET update clause
- the lists of VALUES of INSERTs
- WHERE clause predicates
ReemaPuri wrote:
Try this
INSERT
IN DAD_ASSESSMENT_REQUEST
(tenure_id
client_id
estimated_area_ha
estimated_length_km
)
VALUES
(: P10101_TENURE_ID)
,: P10101_CLIENT_ID
, (SELECT CASE WHEN: P10101_MEASURE_OPTION = 'SPACE' AND THEN: P10101_X)
OTHERWISE, NULL END OF DOUBLE)
, (SELECT CASE WHEN: P10101_MEASURE_OPTION = 'LINE' THEN: P10101_X)
OTHERWISE, NULL END OF DOUBLE)
);
It's a good idea, but it can be simplified, eliminating unnecessary subqueries:
insert into dad_assessment_request ( tenure_id , client_id , estimated_area_ha , estimated_length_km) values ( :p10101_tenure_id , :p10101_client_id , case when :p10101_measure_option = 'AREA' then :p10101_x end , case when :p10101_measure_option = 'LINE' then :p10101_x end);
-
Join the results of a case statement
Hello everyone;
I can't with a query where I use a case statement to create a new column and attempt to reach an additional table on the resulting column. I am fairly new to this and learn by trial and error, so if you think that it looks a little ugly or ineffective, I won't be offended. It is used on my interface based on the web of companies, while I am not able to answer some basic questions such as the version of db.
My need to use the case statement is the result of some strange methods and somewhat contradictory in order to link the product subcodes (sku, fcsku, fnsku), to a product code parent (ProdID). In this case, the inventory is stored in the first table with one of the few types of premises SKUs, however the dimensional data only links to the ProdID. I'm trying to instruction box allows to send the parent a second table (ProdID) code if the sku is there, or a third table if it is found on this table. The main reason (in this case) I have to this ProdID is I can join the dimensional data of a fourth table.
My current query:
SELECT / * + USE_HASH (dbin, sku, xProdID, msr) * /.
dbin.snapshot_date, dbin.bin_id, dbin. ISBN,
CASE WHEN sku. ProdID IS NULL THEN xProdID.ITEM_AUTHORITY_ID
Of ANOTHER sku. ProdID
END ProdIDMaster,
dbin. OWNER, dbin. QUANTITY, dbin. CONTAINER_ID,
MSR. HEIGHT, msr. WIDTH, msr. LENGTH, msr. WEIGHT, msr. DIMENSIONAL_UOM, msr. WEIGHT_UOM,
MSR. HEIGHT * msr. WIDTH * msr. LENGTH as a Volume
OF D_BIN_ITEMS dbin
SKU of LEFT JOIN O_FCSKUS ON dbin. ISBN = sku. FCSKU
LEFT JOIN (SELECT * FROM D_FNSKU_ProdID_MAP)
WHERE REGION_ID = 1
AND SNAPSHOT_DAY = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')) xProdID
ON dbin. ISBN = xProdID.FULFILLMENT_NETWORK_SKU
LEFT JOIN (SELECT * FROM D_MP_ProdID_PKG_MEASUREMENTS)
WHERE REGION_ID = 1 AND MARKETPLACE_ID = 1 AND PACKAGE_TYPE_ID = 1) msr
ON ProdIDMaster = msr. ProdID
WHERE dbin. WAREHOUSE_ID = "PHL5."
AND dbin. Snapshot_date = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')
AND dbin.bin_id like '% P-1-R '.
ORDER BY dbin.bin_id;
The error I receive:
Statement 1 is invalid. ORA-00904: "ProdIDMaster": invalid identifier
ProdIDMaster appears only in two places, an alias for the case statement, as well as a side of the join statement. If I simply change the alias name, it has no effect, so I can only assume the question is how I refer to results of the case statement. I also tried to reach the word 'CASE', which returned "1 statement is not valid. "ORA-00904:"The MATTER": invalid identifier.
Any help or advice would be greatly appreciated.
Post edited by: 8ea4344e-80ea-44e7-b8ac-d482be7245a7 I made a mistake when I posted the code. The ProdID_ID shown in the join should have been ProdIDMaster. I need to change this due to the fact that the name of the column used (which is what I based my alias on) may have been considered confidential information. All the other columns names remained unchanged.
Hello
8ea4344e-80EA-44e7-B8AC-d482be7245a7 wrote:
Hello everyone;
I can't with a query where I use a case statement to create a new column and attempt to reach an additional table on the resulting column. I am fairly new to this and learn by trial and error, so if you think that it looks a little ugly or ineffective, I won't be offended. It is used on my interface based on the web of companies, while I am not able to answer some basic questions such as the version of db.
My need to use the case statement is the result of some strange methods and somewhat contradictory in order to link the product subcodes (sku, fcsku, fnsku), to a product code parent (ProdID). In this case, the inventory is stored in the first table with one of the few types of premises SKUs, however the dimensional data only links to the ProdID. I'm trying to instruction box allows to send the parent a second table (ProdID) code if the sku is there, or a third table if it is found on this table. The main reason (in this case) I have to this ProdID is I can join the dimensional data of a fourth table.
My current query:
SELECT / * + USE_HASH (dbin, sku, xProdID, msr) * /.
dbin.snapshot_date, dbin.bin_id, dbin. ISBN,
CASE WHEN sku. ProdID IS NULL THEN xProdID.ITEM_AUTHORITY_ID
Of ANOTHER sku. ProdID
END ProdIDMaster,
dbin. OWNER, dbin. QUANTITY, dbin. CONTAINER_ID,
MSR. HEIGHT, msr. WIDTH, msr. LENGTH, msr. WEIGHT, msr. DIMENSIONAL_UOM, msr. WEIGHT_UOM,
MSR. HEIGHT * msr. WIDTH * msr. LENGTH as a Volume
OF D_BIN_ITEMS dbin
SKU of LEFT JOIN O_FCSKUS ON dbin. ISBN = sku. FCSKU
LEFT JOIN (SELECT * FROM D_FNSKU_ProdID_MAP)
WHERE REGION_ID = 1
AND SNAPSHOT_DAY = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')) xProdID
ON dbin. ISBN = xProdID.FULFILLMENT_NETWORK_SKU
LEFT JOIN (SELECT * FROM D_MP_ProdID_PKG_MEASUREMENTS)
WHERE REGION_ID = 1 AND MARKETPLACE_ID = 1 AND PACKAGE_TYPE_ID = 1) msr
ON ProdIDid_ID = msr. ProdID
WHERE dbin. WAREHOUSE_ID = "PHL5."
AND dbin. Snapshot_date = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')
AND dbin.bin_id like '% P-1-R '.
ORDER BY dbin.bin_id;
The error I receive:
Statement 1 is invalid. ORA-00904: "ProdIDMaster": invalid identifier
ProdIDMaster appears only in two places, an alias for the case statement, as well as a side of the join statement. If I simply change the alias name, it has no effect, so I can only assume the question is how I refer to results of the case statement. I also tried to reach the word 'CASE', which returned "1 statement is not valid. "ORA-00904:"The MATTER": invalid identifier.
Any help or advice would be greatly appreciated.
Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.
Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.
Always say what version of Oracle you are using (for example, 11.2.0.2.0). Use "SELECT * VERSION of $ v;" to get it.
See the FAQ forum: Re: 2. How can I ask a question on the forums?
When you define an alias for column (such as PriodIDMaster) in the SELECT a query clause, you can use the alias in the ORDER byclause in this request, but this is the only place in this same query, where you can use it. If you want to use anywhere, like in a join condition, then calculate the new column in a subquery; then you can use it anywhere you want in a Super request.
I see expression BOX (not the same as a declarationBOX) where when ProdIDMaster is defined, but I do not see where it is used. Are you sure that you posted the code that is causing the problem?
-
Hello
I am trying to use a global variable 'Global.test' in my ODI "pkg_test" package and step declaration type as a variable that is defined with the value 1 when my package evaluates the condition successfully run and with 0 if the fails.now condition I will carry out the same "pkg_test" package in my load "LP_TEST" and using the variable 'Global.test' Plan as a case statement in terms of load "LP_TEST".
It's workload Odi is unable to understand the value of the variable 'Global.test', which is defined in my pkg 'pkg_test' and my case statement is put down in my care Plan.
Thank you
Hi Santosh Pradhan,
What kind of story do you have in your variable?
If you have not selected any antecedent, the scope of the variable is limited to the session. As the execution of the package is a session in its own (independent of the workload performance), the value of the variable is not accessible after his execution.
You can also try assigning / updating of the value of the variable directly from your plan, instead of in the package:
It will be useful.
Best regards
JeromeFr
-
I have problem with value NULL when the use CASE statement please help this question
I have problem with value NULL when the use CASE statement please help this question
Table: digital_val
SNO cl C2
1 San1 11
2 22 San2
Actual result: expected to A B
A B 11 22
11 NULL
22 NULL
query:
Select case when c1 = "san1" then c2,.
case If c1 = "san2" then c2 B
of digital_val
I'm more curious why, when you select 2 rows, you expect a result of row?
WITH digital_val
AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)
UNION ALL
2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)
SELECT CASE WHEN c1 is "San1" THEN END AS A c2.
CASE WHEN c1 = "San2" THEN END AS B c2
OF digital_val;
With no other input, if you select 2 rows, you get 2 rows. One of the other solutions use a max function, but is this really what you want, does not specify?
-
How can I get the nested case statements to work with listagg?
I have a statement below that does not work as I want it, here is my code:
Select
cases where o.personal_label is not null
then
listagg (cases where s.subcodevalue like '% MON %')
then s.subcodevalue |' '|| o.personal_label
of other s.subcodevalue
end,': ')
the Group (order of s.subcodevalue) as subcodevalue
on the other
listagg (s.subcodevalue,': ')
the Group (order of s.subcodevalue) as subcodevalue
end
of mtm_styles_new s, order_mtm o
where INSTR (o.extras, s.code) > 0
and o.bodyfitting = s.bodyfitting
and o.division = s.division
and s.subcodevalue is not null
and o.ORDER_MTMID = 'somevalue '.
It should bring the following
* MY TEST: RPP
or the following if the first case is not completed:
* MONDAY: RPP
I get an error message saying 'missing keyword', but cannot make out where, can someone please help me here?
The following works fine as long as it is not a nested case statement, but I need to nest the case statement:
Select listagg (cases where s.subcodevalue like '% MON %')
then s.subcodevalue |' '|| o.personal_label
of other s.subcodevalue
end,': ')
the Group (order of s.subcodevalue) as subcodevalue
of mtm_styles_new s, order_mtm o
where INSTR (o.extras, s.code) > 0
and o.bodyfitting = s.bodyfitting
and o.division = s.division
and s.subcodevalue is not null
and o.ORDER_MTMID = 'somevalue ';
Out alias 'subcodevalue as' the case at the end of the case body.
-
ORA-06592: not found CASE when executing CASE statement
Hello
I have a table of application where I built a form master detail (table with 33 columns, 13 is not hidden items and rest are hidden).
When I run the page I get an error "error while rendering page, article. P10_TIME_SAVED_FREQUENCY, ORA-06592: not found when executing CASE statement CASE"
Error:
Error during rendering of the element on the page P8_MONEY_SAVED_FLAG.
ORA-06592: not found CASE when executing CASE statement
Technical information (only visible to developers)
is_internal_error: true
apex_error_code: WWV_FLOW_FORM. UNHANDLED_ERROR
ora_sqlcode:-6592
ora_sqlerrm: ORA-06592: not found CASE when executing CASE statement
Component.type: APEX_APPLICATION_PAGE_ITEMS
Component.ID: 13345536607188241
Component.Name: P8_MONEY_SAVED_FLAG
error_backtrace:
ORA-06512: at "APEX_040200.WWV_FLOW_NATIVE_ITEM", line 1751
ORA-06512: at "APEX_040200.WWV_FLOW_NATIVE_ITEM", line 4241
ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN", line 1251
ORA-06512: at "APEX_040200.WWV_FLOW_FORMS", line 977
ORA-06512: at "APEX_040200.WWV_FLOW_FORMS", line 1406
DEBUG:
Exploitation forest exception in final_exception_handler:
SQLERRM: ORA-20987: APEX - error during rendering of the element on the page P8_MONEY_SAVED_FLAG. -
ORA-06592: not found CASE during the execution of the instruction BOX Backtrace: ORA-06512: at "APEX_040200.WWV_FLOW_ERROR"
line 853 ORA-06512: at "APEX_040200.WWV_FLOW_ERROR"
line 888 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS"
line of 3240 ORA-06512: at "APEX_040200.WWV_FLOW_PAGE"
line of 1780 ORA-06512: at "APEX_040200.WWV_FLOW_PAGE"
line of 1950 ORA-06512: at "APEX_040200.WWV_FLOW", line 6725
How to solve this problem. Please advice
Oracle Apex Vesion: 4.2.1
Thank you
BO123 wrote:
Hello
I have a table of application where I built a form master detail (table with 33 columns, 13 is not hidden items and rest are hidden).
When I run the page I get an error "error while rendering page, article. P10_TIME_SAVED_FREQUENCY, ORA-06592: not found when executing CASE statement CASE"
Error:
Error during rendering of the element on the page P8_MONEY_SAVED_FLAG.
ORA-06592: not found CASE when executing CASE statement
Technical information (only visible to developers)
is_internal_error: true
apex_error_code: WWV_FLOW_FORM. UNHANDLED_ERROR
ora_sqlcode:-6592
ora_sqlerrm: ORA-06592: not found CASE when executing CASE statement
Component.type: APEX_APPLICATION_PAGE_ITEMS
Component.ID: 13345536607188241
Component.Name: P8_MONEY_SAVED_FLAG
error_backtrace:
ORA-06512: at "APEX_040200.WWV_FLOW_NATIVE_ITEM", line 1751
ORA-06512: at "APEX_040200.WWV_FLOW_NATIVE_ITEM", line 4241
ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN", line 1251
ORA-06512: at "APEX_040200.WWV_FLOW_FORMS", line 977
ORA-06512: at "APEX_040200.WWV_FLOW_FORMS", line 1406
DEBUG:
Exploitation forest exception in final_exception_handler:
SQLERRM: ORA-20987: APEX - error during rendering of the element on the page P8_MONEY_SAVED_FLAG. -
ORA-06592: not found CASE during the execution of the instruction BOX Backtrace: ORA-06512: at "APEX_040200.WWV_FLOW_ERROR"
line 853 ORA-06512: at "APEX_040200.WWV_FLOW_ERROR"
line 888 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS"
line of 3240 ORA-06512: at "APEX_040200.WWV_FLOW_PAGE"
line of 1780 ORA-06512: at "APEX_040200.WWV_FLOW_PAGE"
line of 1950 ORA-06512: at "APEX_040200.WWV_FLOW", line 6725
How to solve this problem. Please advice
Oracle Apex Vesion: 4.2.1
Post a backtrace of the page see the request and the item type properties and the source / default to the value of the P8_MONEY_SAVED_FLAG element.
Seems to be similar to ORA-06592 with the page only items appear, which also involved a master/detail form. Can you reproduce this on apex.oracle.com?
Maybe you are looking for
-
Keyboard does not work after automatic update
I have a HP Pavilion g6-2293sa Notebook PC, which itself updated automatically last week and thus the keybard has stopped working completely. I have reset the PC to an earlier point of time, but that did not help. Help topics in HP suggest to uninst
-
I am trying to install the Battlefiefld Bad Co 2 and get a bunch of distibutive DURATION in not installed. I tried to uninstall this package and reinstall it from Microsoft web site and still get this error. Help, please
-
Windows 7 - computer blocked the installation of updated 13 of 14 hours
My Dell laptop gives me the message "If please do not turn off or unplug your machine - installation of updated 13 of 14' and it seems that my DVD drive is trying to eject a disc even thought there is no disc inside. This was during the performance/
-
Play music instead of the ring when your CAD in condition reserved
Incoming call to a CSQ. An agent is available. The agent's phone started ringing. Change office state loan officer to reserved. However, the caller to listen to music, no ringtone. When the Agent to pick up the phone conversation can start successful
-
Aero stopped working after the last update of windows (platform update for windows 7)
The day after this update my aero stopped working and when I troubleshoot-made the mistake was Manager of DWM is disabled but the service is started. I can not it works using the tips found in the support documents. Help, please.