A channel works only in Windows Media Center
Original title: Windows Media Center help
I have a TV tuner card installed on my PC and was seen no problem pulling in all my OTA channels in my area of Minneapolis/St. Paul MN. Now a channel does not work it's affiliate Fox 9.1. 9.2 works fine and all my other channels. 9.1 works very well on my other two TVs connected to the same antenna. I wonder if there is a setting or something that could help me with this problem. Thank you.
Hello
I'll also have a very similar problem. Using OTA in cleveland, oh and the same error message, even if I have a problem with 19.1 (CBS) but 19.2 is fine as well as all my other stations. I have my pc connected to a plasma tv and if I change its entry for antenna 19.1 comes to the fine and they are both connected to the same antenna. I deleted and re-analyzed for channels and 19.1 is here and checking of its green signal strength but no picture. I also tried to uninstall/reinstall the (aver Duo media) tv tuner driver nothing works. This is a recent problem that this system has been since win7 is released and this channel has always worked. If you have found a solution, could you please post.
UPDATE
OK, I found a solution that worked for me, its the site of hack7mc. http://www.hack7mc.com/2009/09/clearing-Guide-data-and-tuner-Setup-from-Windows-7-Media-Center.html. I didn't know all the services they have highlighted but I stop those who ran, deleted the db for the guide data and restarted. Once back at the CCM reran the live tv Setup and everything worked. I hope this helps.
Tags: Windows
Similar Questions
-
Netflix works only in Windows Media Center
For the last 3 weeks I can not connect to Netflix using Windows Media Center. I have a message saying "he has a signature issue. Check the operation of your Internet connection and try again. "My internet connection works. I can connected to Netflix using IE and Firefox. I can also on other web pages. If anyone can help, I'd appreciate it.
See the following information about the Netflix support:
Article number: 972151 - support limits for Netflix in Windows Vista Media Center
http://support.Microsoft.com/kb/9725151Make sure that you have installed the installation package of Netflix for the media
Center. You can download the package from Microsoft Download Center:
http://go.Microsoft.com/fwlink/?LinkId=147175&clcid=0x409You will also need to have Silverlight installed. I would like to check in the iewer event to see if you have error messages in the application or system event logs that reference Netflix or Windows Media Center, or Silverlight.
Note
To open Event Viewer: click on the Start button. In the search box, type and then event viewer from the list of results, double-click Event Viewer.
Is the Windows Media Center works correctly and can access the Internet other than with Netflix?
If the problem is with Netflix Media Center User Interface it is supported by Netflix, not Microsoft.
Go to http://www.netflix.com/help and post your question.Sincerely,
Marilyn
-
Netflix search works only in Windows Media Center (windows 7 pro or Home Premium)
A couple of weeks, there is an update to the Netflix app and since then all 3 of my media center Netflix apps is no longer looking. First error says "APPLICATION ERROR there is a problem with the application at this time. Try again later. "and the second says"SERVICE NOT AVAILABLE this web service is currently unavailable. Try again later. I checked that the service IS available, because it works fine in IE and I contacted Netflix to confirm status. The update of the application Netflix WMC seems to be broken. Anyone know of a fix or are we at the mercy of having to wait for that ultimately get solved by Microsoft. (I run everyday Media Center is our main source/interface for television and movies).
I am a network/systems admin.... do NOT ask me if I restarted my computer or re-installed the application
Thanks for any help on this!
It is a failure on both of my computers of Win 7. Must the installation be run from the command line? I don't see the Install.log file that he mentions.
Edit: So much worse! Read another thread mentioned that he had to be run from a local directory rather then a network drive, worked like a charm! Thank you!!
-
All programs open only to Windows Media Center. __
All programs open only to Windows Media Center. The Windows Media Center now has an icon on all applications.
Go to "Set your default programs" all have Windows Media Center icon on them. I can't use any program or get what is the START Menu.All programs open only to Windows Media Center. The Windows Media Center now has an icon on all applications.
Go to "Set your default programs" all have Windows Media Center icon on them. I can't use any program or get what is the START Menu.Use this tutorial:
http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/
Excerpt:
Download exefix_cu.regand save it to the desktop. Right click on the REG file and choosefusion
http://support.Microsoft.com/kb/950505Here's a more elaborate response of Zack, technical support engineer:
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/16be61fe-76ef-4b91-9F60-3338cbcefb97 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
Mouse pointer disappears only in Windows Media Center.
Since I installed windows 7 my mouse pointer will not be displayed in the center of media windows it is there but invisible. all other programs are very well
HelloTry the below listed methods one by one and check if everything works correctly in Windows Media Center.
Method 1.
Let us disable the traces of the mouse and check if we retrieve the pointer. See the article below for the procedure of
Change the settings of the mouse
http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings
Method 2.If the magnifying glass is about to launch in the start-up, it may cause conflict in this scenario. Let us minimize Media Center and follow the steps below and check if we get the pointer.
a. Click Start, click Control Panel and click on optimize visual display in the category of easy access.
b. clear the check box next to the magnifying glass Tower, then click on apply.
c. restart your computer and sign in to your account.
d. you can see in the spotlight one last time.
e. in case it happens simply close the Magnifier and again to restart your computer.
f. Once you log after doing this the magnifying glass will be gone.
Method 3.
If the problem continues to view us in safe mode. It could be a problem with drivers or another application could be at the origin of the conflict.Please check if you are facing the same question when working in safe mode.
1. reboot your computer.
2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
3. using the arrow keys, select the desired option of Mode safe.
4. press the Enter key on your keyboard to start in safe mode of Windows 7.
5. when Windows starts, use Windows Media Center and check. (In safe mode Windows Media centyer wil not play videos)
If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Where to go to set the channel missing from the Windows Media Center Program Guide
Hi people,
Hoping that someone like Barb Bowman (or a person with any with any part of the Windows Media Center team still it exists) can help me with this. I'm missing a channel in my programming. His 668 (Discovery HD) channel, and my program guide is for Seattle, Comcast King County South (digital). I spoke with Comcast, with Ceton Corp (manufacturing of my digital cable tuner card) and with Zap2it (info guide provider program for WMC). All of them confirm what a) 668 is in my registration, b) 668 is tunable my card, and c) 668 announces are included in the current program guide data from Zap2it. My data to guide program is also completely updated according to WMC. Zap2it has suggested that I use this site to submit the question to Microsoft:
https://connect.Microsoft.com/site1145
I saw other, older messages in this community to refer people to this website as well. Well, whatever used to be here for your comments seems to have been taken down. I can connect, I can click on the link «Studies», but the surveys page lists no surveys underway or completed.
Will there be a new favorite way to indicate this type of problem? Please help me to connect with the right resources at Microsoft to resolve this issue.
Thank you!
-Phil
On Monday, may 5, 2014 20:58:24 + 0000, PPankow wrote:| I've seen other messages, seniors in this community, directing people to thiswebsite as well. Well, whatever used to be here for your comments appearswas taken down. I can connect, I can click on the link «Studies», but theSurveys page does list no ongoing or completed surveys.Select your comments, no investigations, then submit new comments using the feedback button.__________________________________________________________________________________________________BarbMVP Windows Entertainment and connected homeMy Blog - http://digitalmediaphile.com/Connected world Blog Reader Windows 8 App Barb-Windows and Surface drive Windows 8 App communityPlease mark as answer if that answers your question -
Loss of signal HDMI in Windows Media Center
I have a Dell Studio Hybrid PCs only running Windows Vista Home Edition Premium attached to a Samsung LN52A750 LCD HDTV via HDMI. If I turn on the TV away from the PC input and back, I lose the video signal... but only when Windows Media Center is running in full screen.
It works fine:
- Turn on the TV.
- Switch to PC input on the TV.
- Turn on the PC.
- Start Windows Media Center.
- Turn off the PC.
- Turns off the TV (or switch to a different input).
This also works very well:
- Turn on the TV.
- Switch to PC input on the TV.
- Turn on the PC.
- Start Windows Media Center.
- Minimize Windows Media Center.
- Turn on the TV to a different entry, but leave the PC.
- Turn on your TV to the PC - you see always the computer.
It does NOT work:
- Turn on the TV.
- Switch to PC input on the TV.
- Turn on the PC.
- Start Windows Media Center.
- Turn on the TV to a different entry, but leave the PC with Windows Media Center in full screen running .
- Try to turn on the TV to the PC - no picture or sound is on the screen and the PC must be restarted to return sound/video fully.
I came across this problem recently (after the passage of a VGA/DVI to HDMI connection). First of all, I came across it when the PC would go to sleep - the video signal stops and the TV stop see the PC signal, even once the PC is awake. I have read a bit online and thought it was something people call a problem of 'EDID handshake. " I thought simply not let the computer sleep (and do not turn off the PC video) would fix it, but I ran into another issue. Kind of a twist.
I was showing friends how Media Center worked, I spent in the PC, showed them Windows Media Center, spent in a different entry, then switched back to the PC (because I forgot to show you something). The blue background of Media Center appeared for a split second and the signal was instantly lost. I had to reload completely in order to recover the signal.
I retried the experience - shot to the top of Media Center, active the TV away from the computer, then it passed right away - same result. Restart lost, hard signal.
I don't know how I fell on it, but at some point, I had the experience with a twist. I pulled to the top of the computer, started Media Center and reduced. Then I moved the TV away from the PC and back... and the signal was always there. I did it again, and again, the signal was there. The TV turns off and on again - signal always there. Then I enlarged Media Center, changed television away from the PC, and when I came back... NO SIGNAL.
So: with full-screen Media Center loses the signal, but when Media Center is reduced to a minimum the signal remains.
I started thinking about how my recent use of the Media Center differed from the previous time. Normally, I use the Media Center, watch a movie or something and then go and do something else. I'm back from PC to something else and back. And every time that I had spent in the PC and he had kept the signal, the screen saver has been on - the screen saver 'bubbles '.
Something that I noticed with the screensaver "Bubbles" is that it sometimes brings the Windows taskbar in the foreground so it 'up' to the Windows Media Center full screen appears. I usually turn the television on the PC input before "wake the computer" and to get the screensaver to go.
Now I wonder if the lost signal has something to do with Windows Media Center. I have [I think] know a bit the functioning of Windows and the concept of execution of different 'offices '. I wrote a screensaver in C++ unmanaged long ago and I remember there was some crazy stuff that you have to do when you write an application "windowless" (as Media Center - there is no border around it when it goes full screen) and make the "caches", as the screen saver 'bubbles '. I wonder if he has something to do with the standard Windows Desktop works correctly but the Windows Media Center app full screen "desktop" does not properly.
I tried another experience where I kept full screen WMC, leave the TV losing signal and press Win + D to minimize and show the desktop. Then I went to the TV in the back. No luck - once the signal has been lost, it was lost for good.
I did since then research various responses. I read that defining the ACPI suspend mode S3 would fix it, but it doesn't. I tried implementing a keyboard shortcut attached to a script that could change the display resolution of 640 x 480 and then change back because I read changing the resolution to update the signal - which did not work.
Basically, I got no alternative except to keep WMC reduced when it is not in use.
I'll try to set the screen saver "Bubbles" to 1 minute or something and see if that will at least let me inputs turn on the TV after one minute of inactivity. Yet, it would be good to know if there is some setting I'm missing.
Hello Travis and Jmelton98,
Thank you for posting. Your tests of Travis and additional post of Jmelton, it seems it will be probably something that only can be set by the video card drivers. If you were to look at the known issues for some drivers, you would see similar questions types. It is one of the reasons for the drivers for video cards are updated so often. Sometimes there will be a problem so important that they will release a special patch to fix (like what happened during the crisis game is released). There should be a new series of pilots soon become availible.
Please try and see if the problem persists. Thank you both for the replies that it will help others too. Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
Repair Windows Media Center for Windows 7
I'm having a problem with Windows Media Center. Whenever I try to open it, it says it has stopped working and he's looking for the problem. Then it does nothing... I can't do a system restore, simply because there is no restore point on the computer. It won't let me download an older version. It's not even in my list of programs. I am running Windows 7 on a computer that came with Vista Home Basic, so it has some difficulties sometimes still. Is there a way I can fix the program? Can someone help me please?
Go to the Control Panel and select programs and features
In the upper-left corner of the window, select turn Windows features on or OFF.
Expand the entry for the multimedia features (select the plus sign (+).)
Only uncheck Windows Media Center
Select OK.
Restart your computer.
Go back and put a check in the box, and then restart your computer.
-
Blur when the Windows Media Center screen
Original title: fuzzy screen
Why my blurry screen each time I use Windows Media Center?
Hello
1. is the issue limited only with Windows Media Center?
2. This involved looking at videos or pictures?
3. have you made changes on the computer before this problem?
Method 1:
You can check the question in the clean boot state. Read the following article.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.Method 2:
You can run the fix - it from the following link. Difficulty of the problems of Windows display text on screen is not readable by http://support.microsoft.com/mats/Windows_Display_Quality_Diagnostics/
Method 3:
You can consult the following links.Change your screen resolutionFlicker of the correct monitor (refresh rate)
Method 4:You can try to download and install the latest graphics drivers for your computer. You can see the following link.Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 5:If the question is limited to Windows Media Center, you can try to uninstall and reinstall. Follow the steps.Step 1: Disable the Windows Media Center
a. go initially and in search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find multimedia and uncheck Windows Media Player.
d. restart the computer.Step 2: Activate the Windows Media Center
a. go initially and in search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find the multimedia functions and place a check mark in front of the Windows Media Player.
d. restart the computer.For more information, see the article:See also:Troubleshoot monitor and video card
Also applies to Windows 7. -
No screw icon TV in Windows Media Center?
Have the computer HP laptop and Gateway PC with Windows 7 64 bits at a time. Live without TV icons on etiher and guide shows a single channel. Have reset Windows Media Center and Windows Media Player on both. Tried reloading guides and said successful but still nothing on the guide, but a station that are not displayed. Googled and used Microsoft how-to and other Forums to fix appraised in this Forum. Any help appreciated. Windows Update very recent problem run recently?
What the tv tuner card is there?
What link are you using?
Having the same on both systems? (HP and gateway)
Uninstall and reinstall the tv tuner card driver. Visit the tv tuner card manufacturer's Web site to download and install the latest version of the driver. Once done, reconfigure WMC.
-
IM in the United Kingdom using windows 7 my WMC IS WORKING, BUT MY TV CHANNELS ARE NOT IN THE CORRECT ORDER Please HELP
R O N
original title: GI in the United Kingdom using windows 7 my WMC IS WORKING, BUT MY TV CHANNELS ARE NOT IN THE CORRECT ORDER Please HELP
HelloRun the troubleshooter for Windows Media Center and check if that helps.
Troubleshoot Guide downloading problems in Windows Media Center:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center
You can see the following link.
Use the Guide in Windows Media Center:
http://Windows.Microsoft.com/en-us/Windows-Vista/use-the-guide-in-Windows-Media-Center -
Windows Media Center using only not to Clear QAM channels, at least some of them.
So check it... I already updated my operating system from Windows Vista to Windows 7 as soon as it became available last year and had been using Windows Media Center on my HP m8330f to record live shows with a digital antenna. I decided, spotty reception because, as I plug in my TV Tuner directly through my cable (without decoder) and Clear QAM channels this mode of access. After noticing that my old TV Tuner was missing several channels (not shown 6) I chose to add missing channels, as shown in several forum posts. I added successfully most of the available channels except the two I wanted most, NBC and ABC. Since my TV Tuner was quite old (double ViXS ban, card simple tuner), I decided to upgrade to the Hauppauge 2250 encryption that could be a cause for the missing channels... and more, it is a ban on double, double tuner the card. Alas, the Hauppauge worked in much the same way that its predecessor and the lack of NBC (4.1) and ABC (2.1) are not found... even after attempting to add channels. All that is visible is a "Service is unavailable" message.
I am a customer of Time Warner Cable in New York and have had no problem accessing these (Clear QAM) channels on my' computer', the LG 32LH40 thanks its tuner internal. Moreover, I was able to access these same channels via the same TV Tuner using WinTV v7 and Beyond TV. This leads me to believe that the problem lies in the Windows Media Center software.
I am a big fan of Windows Media Center and love how convenient it is (apart from my current dilemma) and still want to use it as my main media look at a software but I'm torn on this issue. I don't know if you have experienced this problem before, but I am quite stunned, especially since I feel like I've exhausted all channels (which goes as far to add the channels first as a modulation QAM 64 and 256). Does anyone else have this problem? Any ideas would be extremely useful.
Thank you!
Hi Chris,
Thanks for your help! I thought both on the channel number, but I could not find a network ads everywhere about my service area (I had not yet known on that SiliconDust website but I just took a shot and that's exactly what I needed...) (Thank you!) ; or the information that I found were incorrect. I ended up working all last night.
After many rescan with WinTV and Beyond TV, I could finally figure what channel were virtual and who were not and add missing channels accordingly. Remappe MC my 104,2 at 4.2 but not my 104.1 makes my TV as well as WinTV. Beyond TV didn't display the number of virtual channel while parsing, so I was able to get the numbers of QAM channels how. He was just working backwards. However, MC had yet 104.1 (my 4.1 missing such as mentioned in my previous post) in his 'detected chains"(strangely)... so I added it.
Thank you for this Web site again!
-
Stop, jump and back orders MCE works only in Windows 7 Media Center
I have a HTPC home built with card mother Gigabyte GA-Z68MA-D2H-B3 with i3-2100 processor, running Windows 7 Edition Home Premium. I have three different input devices:
(1) Logitech MK320 keyboard bluetooth and a separate mouse
(2) distance of keyboard/mouse bluetooth Lenovo N5902
(3) remote control Logitech Harmony 890 that interacts with the HTPC via an HP MCE IR receiver USB wireless (used for almost 95% of all applications)
I've been running Windows Media Center (WMC) for 1 year now through the HTPC for LiveTV, music and RecordedTV. I also use the Netflix plug-in and I have Media Browser (MB) to play all my movies. Everything worked perfectly and then about 2 months ago, SKIP and REPLAY has stopped working on the Harmony remote. I did some extensive troubleshooting and found the following:
(1) if I restart the machine, sometimes the STOP, the SKIP and REPLAY buttons on the harmony and the Lenovo work for awhile, but eventually (maybe 15 to 30 minutes later they will stop working), closure of WMC and restart WMC has no effect.
(2) when the STOP, JUMP, REPLAY buttons do not work, all other commands still work (PAUSE, PLAY, FFW, REW, REC, EXIT, etc.).
(3) when the 3 buttons stop working on the harmony they also stop work on the Lenovo, however hit CTRL + B (REPLAY), CTRL + F (SKIP) and CTRL + SHIFT + S (STOP) on the MK320 or Lenovo always correctly executes these commands. Also, using the mouse and clicking on the STOP, SKIP or REPLAY on the bottom right WMC button is still running these commands.
Conclusions:
(1) it is not the USB IR receiver wireless or remote Harmony, because the Lenovo bluetooth also stops working. Hid drivers for the IR receiver and Bluetooth dongles are all to date.
(2) the problem lies within Windows. Maybe the registry? I have installed and uninstalled several programs on the HTPC. I used CCleaner and defragmentation of registry without help. I'm sure that do an install own complete will fix the problem, but I would like to avoid that if possible.
Someone at - it solution or seen this problem before? If not, can you at least direct me to key in registry for these 3 actions and what they "should" be? Maybe I can identify a difference.
Problem solved!
Leave it to Apple to mess up your Windows PC!
I had iTunes running down to the task bar, so I could use the "Remote" app on my iPad and iPhone to listen to music on the HTPC. Well, iTunes was hijacking the STOP, SKIP and orders in MCE REPLAY. Once I closed iTunes, everything worked fine. Freaking products Apple, urghh!
-
After the upgrade, only the specific movie channels in Media center play is more (Record) after approximately 6 seconds.
(Do not forget that there is a function of pause/forward who s equivalent to check-in for DRM)Get a message from copying prohibited.Looks like the upgrade of the processor messed up somehow DRM rights for this machine, to the point where no films previously saved are playable AND NO NEW FILMS can be registered and enrolled in some way a Canadian Film Channel. (Bell Expressvu - channels 300 + Movie Network)Delete the contents of the file DRM (archive first)c:/program data/microsoft/windows/drm.Restarted...Partial contents of the folder have been recreated...Problem remains.Can Watch all the channels, but those who are 'Movie channels' stop after about 6 to 10 seconds and display a Message of copying prohibited.The broadcaster has banned this content to be copied. You can only read this content on the same computer on which it was recorded.Note: I don't like on my OLD recorded movies... In fact already deleted... I just want to be able to watch the movie channels and save NEW ones...Well after 4 days of effort + a fix was finally discovered...
(1) exit Windows Media Center is running.(2) open a cmd prompt - run as administrator.
(3) run the following commands one at a time:
Code: net stop ehrecvr
CD %programdata%\Microsoft\PlayReady
del *.hds
rmdir /s Cache
CD %programdata%\Microsoft\ehome
del *.hds
rmdir /s Cache
net start ehrecvr(4) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.
It was the only solution to Playready update succeed to in Windows Media Center.Playback worked immediately without any loss overall upward or configuration information... -
Please help - it's driving me crazy! I got this to work!
I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
"The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above. I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.
My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.
I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.
I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.
I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.
The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.
On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.
Any help would be really appreciated!
Hello Lowwatts,
Microsoft Xbox 360 community
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to
Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.
Try following the steps in this article:
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Pass the old audit in two stages of new two-factor authentication?
Someone went from the old system of audit in two steps at the new verification of two factors? Or deployment only goes to people who don't use two-step before? juls
-
Windows update fails with error 8007273D
I installed Windows 7 on XP on a partition of my iMac 24 "Intel on July 11. It worked fine, whereas it is a pre-release system, except an error that arose today, July 13. When I try to do a Windows Update, it now gives me error code 8007273D this has
-
How can I set up the DVD player, the 1st boot priority?
I don't know hoe to set my PC startup to restart from the DVD player. I have a product recovery disk, but not to make my PC open system restore. Help, please.I changed my system registry uxtheme.dll and this problem started occurring.
-
HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen
Hello I have a HP ENVY 15 t-j000 Quad Edition Notebook PC. Recently I started to notice a problem on my laptop. I have some... Help, please!
-
I just got an EA4500 and I really like it. I got set up with my printer, tested a few things and everything works perfectly fine. The problem I have now is that when I plug in the USB flash drive I don't know how to access. For some reason when I go