A computer on Win7 Home premium able to map a network drive on a computer in a different domain?

Similar Questions

• Vista Home premium unable to connect a network drive or find the storage network

  I have a hard drive attached to the network.  I've never been able to get my Vista machine to map to it.  Network discovery is on.  In the centre network and sharing, if I click on "View full map", Vista tells me 'Windows cannot create a map for the type of network connection', but on that same network card screen if I click on "view computers and devices", I can see the device that I want to connect.  When I try to get the camera when you try to map my network drive, Windows can not see it.  I can ping IP of the device, and I can't open the device html interface in my browser.  My XP and 7 machines see the end reader.

  Try the steps in belo

  http://www.RealGeek.com/forums/my-Vista-wont-draw-me-a-network-map-64463.html

• Pavilion dv7t-4000 laptop: AMD HDMI port on the computer laptop dv7 is lost after free trial Win10 returns to Win7 Home Premium edition

  My laptop was purchased in sept 2010 and runs Win7 Home Premium Edition (64-bit).

  It worked perfectly until June 2016, when the trial version free odious Win10 forced itself on my laptop.  I had no choice, I used Win10 for a day or 2 and then discovered that:

  (1) I lost the audio capability, HDMI port, I use to connect to my TV, and

  (2) the Win10 trial enabled me to return on Win7, I did without delay.

  In my Win 7 restored, everything was fine, except when I have her go in Control Panel to configure / reconfigure HDMI as the default, I couldn't - the element used to appear as "AMD HDMI Audio" is no longer displayed.  I remember a message during the free trial period Win10 that says it has disabled any material incompatible.  Without a doubt, Win10 free trial 'killed' this HDMI/device port, at least audio-wise.

  Today, I always run the same Win7, but I can't have audio HDMI on this port.  When I connect to my TV, the video works.  Win7 Device Manager it shows with an exclamation in yellow, and when I right click to get more details, there is a message saying Microsoft:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52).

  Is there a way to 'get it '?  'this' is AMD HDMI audio.  (and wthout spoil the graphics - that is, video)

  I tried to install the drivers provided by AMD [graphics] and that did not work. The Internet from AMD website says that the audio drivers are included in the package for graphics drivers.  There is also a huge confusion in the way these low level items are named/described: ATI and AMD, because they have merged, were used somewhat interchangeably.  I also tried the graphics drivers AMD HP Support Web site specific to my laptop and it has only gotten worse.

  Thank you for your kind attention.

  Hi @ RTX,

  Awesome response. I read the details and depth of your post. I understand that the bios is updated. So you could end up with this update.

  Happens to the other updates. This will be the order.

  1. Uninstalling the driver Chipset and resettlement.

  2 reinstalling and uninstalling graphics drivers

  3. uninstall the sound drivers and reinstall.

  Before uninstalling, you can try to update the drivers supplied by device also Manager and if that market that will be great. Please, do it only if you don't have already done.

  Before uninstalling please make sure that you capture an image of the complete Device Manager window. Take some pictures of your cell phone. Please note the exact device for audio and video chipset drivers. Then, you will need to uninstall it from the Device Manager and install from the support site in the above order so that there is no confusion.

  If nothing works as a last resort, you may need to restore complete system to factory settings. Please backup your files before doing so. This is possible since the recovery of your computer's hard drive partition.

  Link to the system recovery: http://support.hp.com/us-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/4284279/model/4221688/document/c01867418/

  Please hold me. I hope that it pans well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• I already had a Win7 Home Premium on my old computer and installed it in the new computer. Now, Windows is not genuine.

  I recently bought a second hand COMPAQ (Vista Basic).  I have a Win7 Home Premium, which was on my old computer but now failed.  I installed on the laptop and entered the product key.  He repeated to enter the product key.  I went to put it on today and now it says non-genuine Windows. What should I do? Thank you

  Original title: WINDOWS NOT GENUINE

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought (detail) and use Win7 Home Premium on my computer at home. Is it permissible to install the operating system on a second computer at home?

  How many computers can I install win7 Home premium, commercial version?

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• you just bought LR6 as I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  Right click on the file Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  See the link below:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• Win7 Home Premium Upgrade

  Pre installed Win7 Home Premium laptop computer here in Mexioco, however it turns out be Spanish and I need to change the English language. It seems that only there is to upgrade to Enterprise and Ultimate. MS provides a free update. I just need to have English on my laptop.

  You MUST run Win7 Ultimate (or Win7 Premium) to be able to change the language version of Windows. Professional Win7 is not eligible. See...

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise [emphasis added]
  http://support.Microsoft.com/default.aspx/KB/972813
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to recover installed WIN7 Home Premium of g4-1104dx?

  G4 had a corrupt BIOS and MBR.  I was able to fix both after loading a WIN7 business start-up and repair work DVD.   Now, I want to recover my WIN7 Home Premium OS.  The collection records and HP_Tools are both here on the hard drive... D: and E:.  How to make the process?  It is even possible to achieve?

  Gaucho70

  1. turn on or reboot / restart the computer.
  2. press the F11 key repeatedly once you see the logo of the manufacturer until the recovery screen. This must be done before your operating system begins to load. If you see the Windows logo appears on the screen, you will need to restart, and then try again.
  3. If the Recovery Manager can access the recovery on the hard drive partition, you receive a to back up user files before you start the recovery prompt. Follow the instructions.
  4. If the HP Recovery Manager cannot access the hard disk to resolve system errors, you can use the recovery disc custom that you created to recover the hard disk to its original state.
  5. after recovery finished, the laptop will reboot.

  If you have not created the custom recovery disk, or disks are damaged, you can order a replacementrecovery HP disk

  Checkurtech

• While Windows anytime upgrade from Win7 Home Premium to Win7 Pro received the notice that failed.

  Original title: upgrade Express failure.

  I'm doing an anytime upgrade from Win7 Home Premium to Win7 Pro. I get a notice that failed and get back to home premium.

  Any thoughts would be appreciated.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Why I can not validate my key win7 Home premium

  I had a windows 7 is already installed when I bought this computer tower he had windows 7 Edition home premium 64 x I recently had to do a new installation and format my computer until I downloaded a win7 Home premium 6xbit from the microsoft site and got the key from the windows, I got, it's a valid windows had all updates while maintaining this new windows and whether the same version as my pervious I use the key I've had and is not validate my key it will say my key is not valid for this any help would be great and a lot of people, I know they get the computer with a windows CD, so you have to do one, but the original disk is of no use to me , so I used your site dvd ISO and now I have to validate and it will not

  I suspect that the key that you got is the OEM SLP key that works only with OEM recovery media. you use the key on your COA.

  to see what you have:

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Ethernet LAN identified and connected on HP pavilion M6 1002 - tx Win7 home premium 64-bit

  Model: HP pavilion m6 1002-tx

  OS: Windows 7 Home Premium 64-bit

  I bought a HP pavilion m6 1002-tx win7 Home Premium 64 - bit two weeks back. (November 30, 2012)

  I am not able to connect my ethernet lan because the system loses the connection just as I connect to the adapter. Its continually go... like... ID disconnected... identify... disconnected... and so on.

  It is a Realtek PCIe GBE family controller (Version: 7.54.309.2012). I checked the Ethernet driver lan on the hp support site and it is even installed on my system.

  Please help me solve this problem.

  Check if the connection is really good. Other laptops are able to use this ethernet cable? Try to change the speed and duplex to 10/semester, it will be useful.

• Update Win7 Home Premium 32-bit to Win7 Home Premium 64-bit

  I just bought a Thinkpad X 201 comes preinstalled with Win7 Home Premium 32 - bit installed and I prefer to run the 64-bit version. Is it possible that I can get the DVD (s) necessary economically and the current product on my laptop key will validate the 64-bit version? I understand that this will require a clean install, but as MS normally provides both 32-bit and 64-bit win7 version with it games standard OEM hoped that Lenovo could provide me DVD (s) you need to little or no costs (delivery?).

  Hi DrMike9 and welcome to the Lenovo user community!

  You can do it! See this support page:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-74752

  I hope this helps!

• Win7 Home Premium or Professional win7?

  I'm new to these forums, but have questions.  I'm to customize a XPS8300 that I intend to buy soon.  Everything looks to be in order except the operating system.  I can't decide whether or not to choose Win7 Home Premium or Professional of Win7.

  I know Win7 Pro is better, but it adds $130 in total.  I could save by going with Win7 Home now and upgrade to the pro version later, at about half the cost.  However, I have a feeling that does not immediately get Win7 Pro likely a software problem or issue some time in the future.

  What do you think?

  What features of Win7 Pro do you need? I have Win7 Pro on my main machine, but I don't use any of the features. I use only cause I got it for free while I was in College. But I do not use the BitLocker feature (or I did when I had Vista Ultimate), I am more True Crypt fan myself. So, if you are looking for an encryption program that would be my recommendation.

  Of course, if you're in an office environment & * need * the updates in Windows 7 Pro Advanced Tools network then go by all means to her; It's either that or Windows 7 Ultimate edition.

• Can not find the program "Mathematical Input Panel" in Win7 Home Premium edition

  Can not find the program "Mathematical Input Panel" in Win7 Home Premium edition

  On my Home Premium, it's in all programs > Accessories

  or easier to use the Start button immediately above "search programs and files" then type Math

• Win7 Home Premium is not BitLocker-upgrade is no longer available - who need Software.TrueCrypt said encryption is not safe

  Hello

  I'm having the same problem as some of the herer posters. I need protect my data. I tried to upgrade to win7 home premium, but microsoft are selling it is no longer. And tried to upgrade to win8, but some drivers won't work. Is there a way to get Bitlocker? I have My Winlocker, but I have a lot of data.

  I installed Truecrypt and was about to try when I followed a link on the first window that appears after you click the "create volume" button and a link below the first option on this page, "create a file ecrypted container" and it led me to:

  http://TrueCrypt.sourceforge.NET/

  who warns that this TrueCrypt is not secure (?) What is this software works well with win 7?

  I can't buy Windows 7 pro or any other version of Windows 7 that microsoft have stopped selling. So I have no way to obtain the bitlocker version that comes with these versions

  I have read the forums who say TrueCrypt is very good, is it? If this is not the case, what is a better software for encryption and hide the volume and the reliablility?

  Are files encrypted by bitlocker always encrypted and invisbile if the pc is restored to factory State or BitLocker is uninstalled? I remember reading that somewhere, that these files will be are more protected.

  I checked the "Anytime Upgrade" link in windws, and now, it brings me to a payment page... ! Is now available again? I was told an online service in a forum or by microsoft that the upgrade of anytme was no longer available! Is it actually available again?

  Thanks in advance

  The thing about truecrypt is weird, just noticed this myself today. So Ive used for a while to worm for worm 7.1 6.3 has this review appeared recently as well as 7.2.

  There are other free alternatives, see this list of CNET for example - http://download.cnet.com/windows/encryption-software/?licenseType=Free&osNamesExact=Windows+7&sort=editorRating ~ desc % 2CdownloadCountLastWeek ~ desc also http://download.cnet.com/8301-2007_4-57620831-12/truecrypts-cryptic-warning-is-downright-alarming/?tag=rb_content;main

  I only mention CNET as a way to get a quick list and comparison information.