A control inside a secondary blinking: is it possible?

Similar Questions

• Node property of a control inside the cluster within a table

  I created a control that has a cluster to a Boolean, a string, and a digital.  Then, in my front, I created a table of these custom controls.  I wish I had access to the property of the controls inside the cluster in the table.  That is to say, I want to change the color of the Boolean or blinking, or "disable and gray" text box.  I think I'm on the right track, or maybe I'm on the wrong track.  I joined and example VI (testtray.vi) and control that I use (UUT_Display.ctl).  Please excuse the use of a flat Structure of the sequence, I know it is bad programming practices, but I just wanted to throw something together.

  Any help would be appreciated.

  Kevin

  Items in a table can have different values, BUT each element of the table share the same properties.

  "Blink" is a property when you make one in tha table blink you will all Flash.

  This restriction does not apply to clusters.

  So in theory, you could develop an XControl that has a data type is an array, but the display is actually a cluster that resembles a table. But write an XControl is not a trivial task.

  Ben

• GI for a stand-alone inside the secondary zone

  Hello world.

  I try to install IM in Solaris 11.1 secondary zone.

  I perform software installation only:

  ...

  Software installation successfully.

  After I perform a GI for stand-alone root scripts:

  root@db1:/tmp# /u01/app/11.2.0/grid/perl/bin/perl-I/u01/app/11.2.0/grid/perl/lib-I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl

  The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  User ignored the prerequisites during installation

  LD.so.1:: ocrconfig.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type

  LD.so.1:: clscfg.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type

  LD.so.1:: clscfg.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type

  Failure with signal control 9: /u01/app/11.2.0/grid/bin/clscfg-local g asmadmin

  Creating OCR only local (local /u01/app/11.2.0/grid/bin/clscfg-asmadmin - g)... failed

  The /u01/app/11.2.0/grid/lib/libclntsh.so.11.1 file are of size zero:
  

  root@db1:/tmp# du-sh /u01/app/11.2.0/grid/lib/libclntsh.so.11.1

  0K /u01/app/11.2.0/grid/lib/libclntsh.so.11.1

  In the global zone, all right.

  ...

  Software installation successfully.

  Configuration of IM for standalone:

  root@Exadata:/tmp# /u01/app/11.2.0/grid/perl/bin/perl-I/u01/app/11.2.0/grid/perl/lib-I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl

  The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  User ignored the prerequisites during installation

  ADD LOCAL MODE

  Creating OCR keys for the user "grid", privgrp 'oinstall '...

  Successful operation.

  LOCAL ONLY MODE

  Successfully accumulated necessary OCR keys.

  Creating OCR keys for the user "root", "root"... privgrp

  Successful operation.

  CRS-4664: node exadata pinned successfully.

  Adding Clusterware entries to inittab

  Exadata 2014/03/02 19:35:36 /u01/app/11.2.0/grid/cdata/exadata/backup_20140302_193536.olr

  Grid infrastructure Oracle correctly configured for a stand-alone server

  root@Exadata:/tmp# du-sh /u01/app/11.2.0/grid/lib/libclntsh.so.11.1

  /U01/app/11.2.0/grid/lib/libclntsh.so.11.1 51 M

  The installation directory is the same for the global zone and zub-zone (fs just loop back).

  I can't copy valid libclntsh.so.11.1 in the secondary area before configuring, but what happens?

  Hello

  Solaris zones are not all packages from the global zone. A default area is an imprint of very thin bones were you add several packages.

  That's what I've done for solaris:

  pkg install/system/solaris-big-server group

  pkg install xclock libxmuu x 11-info-clients compatibility/ucb

  pkg install SUNWarc SUNWbtool SUNWhea SUNWlibC SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWcsl SUNWxcu4 pkg://solaris/SUNWxwplt

  Great server to get a lot of useful tools

  connection for Yes and ucb package is needed to patch it with opatch

  third line are the requirements for solaris, as documented in the manual and where applicable under solaris 11

  Concerning

  Thomas

• Create controls inside a container?

  I am now creating a checkbox when running with the following code:
  
  Import mx.controls.CheckBox;
  createClassObject (checkbox, "button2", 5, {label: "Test Case"});
  
  Is there a way to create a button inside another object like a ScrollPane (or something?)? I created a ScrollPane in designtime and want the boxes, as well as the text and maybe draw lines contained in it during execution. Is this possible? If not, is there another container which would allow this?
  
  I try this with the following code:
  
  CounterScrollPane.createClassObject (checkbox, "button3", 5, {label: "Test Case"});
  
  but it does not work.
  
  Any thoughts?
  
  Thank you!

  This should help:

• Event case + while loop (the controls inside the loop will not be updated)

  Ok. I don't know what I'm doing wrong.

  But when I press Start, I can't move the slider control.

  All the obvious errors here?

  Bob123456 wrote:

  But when I press Start, I can't move the slider control.

  Your event is set to lock the front until the end of the event. This means that you are in a bind, because the event cannot be completed until the button is pressed, which can happen because the FP is locked.

  Quick "bandaid fix" would be to uncheck this option in the configuration of the event. Not recommended!

  You should never place interactive code within the structures of the event. Restructure your code accordingly. See state machines, for example.

• How to find all the Subvi value changes to a control inside a cluster?

  I have a question I've had brewing for many years now, and as of today, this issue has become less philosophical for me now that I have a VI project with hundreds of screws in there to work through... If I have a cluster which is passed between/through several subVIs, is there a way to find all reads/writes to a particular control within this cluster? For example, if I use a global variable, I can find all the instances where this variable has been changed. Several times, a cluster is used to pass data instead of lots of global variables, but I know not anyway quickly find where specific parts of the latter are read or written in subVIs. Global variables becomes a headache when they are too many of them fly around, but I can't keep track of reads/writes in bunches without manually looking through a few screws hundreds that take in the cluster. Is there a function for this that I'm not aware of? I hope that this question/problem of logic. This may prompt a discussion of architecture, which I would be happy, because I will need to build projects of this scale in the future, but I think also completely stuck when the clusters are used (by me or others) to pass data autour. Thank you! John

  If you ungroup by name and bundle by name, just do a search for text to the name of the control.

• Moving text out of control inside the accordion Widget

  Hi guys! I was crashing my head for two days with this. I hope that you will help!

  I have a Widget Accordion with a block of very long text inside one of the boxes (a list with more than 80 lines). On the context in which each line of the second, I put a gray rectangle shape just to give some contrast to the lines in the list. In the project all rectangles are perfectly aligned to be just behind the lines. But when I write the site that I certainly see the rectangles to shift upwards or downwards.

  Is it a bug and the guns widget simply properly manage so many elements insie the feiled or am I missing something here?

  Thank you very much in advance for your advice! You could save me from madness here ;)

  

  UPDATE! It was not the forms, but the text that moved. I preferred some items in the list that consists of two lines. This is where I changed the leader betwin these two lines of 200% (for the separate elements in the list) to 146% between two lines (for items that contain two lines of text). That shopping somehow the text to move in the xompared Preview on the design mode mode. When I do the main unilateral activity of the entire text box, everything is in place.

  The problem is still not solved.
  

  Head of the percentages (line spacing) is rounded up to a whole pixel count in some browsers and is used as a mixed number in others.

  Confirm that 'cycle leading to an integer' setting is enabled in the "Content" of the Site Properties Panel.

  If you use a 'web-safe', the text will be different in different browsers. If you use a Web font there less variation in the provision on a line between browsers and so it will be less likely that the text will be in line break at different heights in the different browsers.

• Set the properties of the control inside containers

  Hi, I need to know what is the reason why when I try to set a value in the text property of the TextInput in the control tabNavegator control.

  When I try to do

  Ctrol.Text = ' ';

  the error is:

  Error #1009: Cannot access a property or method of a null object reference.

  Help, please.

  With the navigator, such as TabNavigator and ViewStack container, etc. by children alone of the first view displayed by default are instantiated, and seen subsequent children are instantiated only when that view is accessible.

  You can set creationPolicy = "all" for the TabNavigator and this error will not occur, but if your user interface is complex it can affect startup performance.

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance - Flex 2 and 3 certified ACE

  www.ChikaraDev.com

  Flex / development, training, AIR and Support Services

• Insert the text of the control inside the httpservice url property

  I'm trying to insert a DateField.text property in the HTTPService url field in the part of the script. I tested successfully with the definition of the scope of the url with a location and call the. send() results with a button. How to start the url out of a variable? Here is my code that I use to call the HTTPService and it works if I put the complete line.
  
  public void changeDate (): void {}
  SRV. URL = "" http://mydomain.com/temp/2008-03-21.xml "; "
  SRV. Send();
  }
  
  I'm going to pull the text property of a DateField with dF id. This doesn't quite work. What I need to fix?
  public void changeDate (): void {}
  SRV. URL = "' http://mydomain.com/temp/' + {dF.text} + '.xml" ";
  SRV. Send();
  }
  
  

  OK, thanks for the help. I got it to work!

  That's the final function.
  public void changeDate (): void {}
  SRV. URL = "' http://mydomain.com/temp/ ' + dF.text +".xml";"
  SRV. Send();
  }

• By default, Labview 8.6 places conventional controls on the front panel; Is it possible to change the default settings to modern or Express possible?...

  
  

  The default value is of modern controls and I always change to classic.

  I am classic and the classic controls are much easier to adapt to what I want.

  options GOTO and look along all tabs to find the place where the new vi is adjustable and modern controls by default

  But keep in mind only new i's, old vi must be changed in the properties of this vi.

  Guilbert

• I can't resize any object inside a tab control and control of the tab itself

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

  Sure, tab control is not locked.

  If the tab control is locked that resize is not possible

  Lucast85 wrote:

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

• Shutdown problem reference VI in nested secondary, causing the encountered error 'end of file'.

  Hello

  I'm relatively new to LabVIEW using LabVIEW 8.0 and am having a strange problem.  My program is such that I have a front panel (A), which opens a secondary (B) by a remote control.  This secondary (B) has a button that, when pressed, runs subvi C AND displays a subgroup of experts containing graphical real-time C.vi.  'C', my code uses a reading of file extent express VI to read a text file in a table that is essential to the vi and in the iterations unique VI there is no problem whatsoever, HOWEVER if the C.vi is not properly closed and he's trying to run again, you receive an "end of file" error encountered.  When I run just B.vi and C.vi access like that, I coded "close after call ' and wired this reference to a narrow File.vi VI.  It works as I can repeatedly run C.vi, and no error occurs. However, when I start at A.i and access the secondary B.vi C.vi, I can run successfully the first time, but if I try to run the second time, I get the error "end of file encountered.  I really don't know what the right course of action here is B-> C works fine, but A-> B-> C is not working even if A is not having a single reference to C.vi whatsoever.

  Thank you for your time.

  Well, it was a bit confusing to read, but my guess is that the file pointer is remaining at the end of the file if a kind of close file does not correctly when B is executed inside the A. You said when he is not stopped correctly in this case, then all bets are off if the file is not closed. My suggestion is to ensure the folder is closed correctly (make sure you're not abandonment of the VI, but instead they sent a release message) and if you are not reading files measure but rather use the IO file screws, there is a VI to set the file position. You can set it to 'start' each time before play you.

  It's just a guess, you can post your VI if you can.

• Change the properties of a cluster element inside an array of clusters

  Hi all

  I have a table of cluster that has the shape of a line with different elements of the screen.

  A list or a tree would not have made it, so I had to use a cluster and make a.

  The problem is I want to change not only the text but also the color of the text.

  Individually.

  I found this:

  http://www.NI.com/example/30904/en/

  But it changes the property in all groups in the table, not just the one I need.

  Some people have the same problem:

  http://forums.NI.com/T5/LabVIEW/reference-to-array-of-clusters-with-an-array-element/TD-p/1006427

  http://forums.NI.com/T5/LabVIEW/different-set-of-values-for-two-rings-in-an-array-of-clusters/m-p/10...

  http://forums.NI.com/T5/LabVIEW/array-of-clusters-get-references-to-all-the-clusters/TD-p/1079456

  http://forums.NI.com/T5/LabVIEW/how-can-I-reference-the-properties-of-a-control-in-a-cluster-in/m-p/...

  http://forums.NI.com/T5/LabVIEW/writing-only-to-certain-cluster-elements-in-an-array-by/m-p/2200728

  http://forums.NI.com/T5/LabVIEW/update-properties-of-one-control-in-an-array/m-p/3015501

  http://forums.NI.com/T5/LabVIEW/array-of-clusters-and-in-the-cluster-is-a-bar-meter-how-can-I/m-p/15...

  http://forums.NI.com/T5/LabVIEW/property-node-of-a-control-inside-of-cluster-inside-an-array/m-p/946...

  Obviously, even if in a table/list or a tree, you can change the property of an individual

  cells (font, color), you can't do it in a cluster network, by a kind of magic.

  the property of an element of the cluster (font, color) are all connected together, so made

  the use of a table without value.

  A possible hack is available using masking of control, a visible setting and the

  other invisble, exchanging their position, whatever. This is a hack you have to perform,

  Therefore, add another code to maintain.

  Is that still the case, or is it now a more formal way to manage the individual cluster

  Properties, not only its data? After all it is a common example of a real life which should

  managed by Labview. In my opinion.

  David Koch

  Altenbach says:

  One of the elements could be an indicator of 2D about the same size image. You can create text in any color using the features of the image.

  Here's what I had in mind. Seems to work very well (I would refine the border picture fonts, etc., but this should help you get started).

  

• How to get the name of a class private data controls?

  How can I get the names of the controls within a class private data?

  I use the framework of the actor and try to create a tha method will be executed when run the actor. This method should an o list all names of control inside the data class to find the initial value within a configuration file (config.ini file), the key to the configuration file will be the name of the control.

  Thank you.

  You already do the substitution method just because you write for the bundle by name.  And then how are you going to respond to all types of data might be the key.  You do more difficult things that it takes to really very few benefits.

• Get the Type (U8, U16... I64) controls within a Cluster

  Hello

  I have a cluster with multiple controls.

  I would get the type of each control inside. To get the class is ok. It's simple and they are all digital. But I need to know if they are U8, U16, U32... I64.

  No idea how to do this?

  Paul

  I got it.

  I had to convert the Refernce element to digital, and then use the BitAccurateDataSize property.

  I lost several hours to find the solution and in 5 minutes after I had posted my problem on the forum I solved it .