A corroded light cable damage the port of loading to a 6 s iPhone? Telegrams still but he is starting to show signs of corrosion.

Similar Questions

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  They diagnose what's wrong with it.
  If it requires no parts, he (should ' t) costs nothing.

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• My iPhone 6 loads very slowly and sometimes it takes like two trials for the symbol with the lightning to appear. I think he might have a problem on the port of loading

  My iPhone 6 load very slowly. And sometimes other cables works instantly on my iPhone unlike my sister who has the same phone as me. My sister does not have this problem with our cable. Also the battery becomes low too quickly.

  In the last months, I use as a class a lightning because here in the Philippines, original iPhone cable cables look like $25. My sister also uses the same cable as me but she has no problems

  How to fix this please? Can I go to any apple centre and check my phone to see what happened?

  Hello

  Follow the steps here, including the verification of the charge for debris socket:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• I can't get the internet cable into the port

  the model is an hp Pavilion dv2700

  Hello

  What type of cable you are using? We use called CAT5e or CAT6 LAN cables. This is the LAN port on your machine:

  

  and the cable should look like this:

  

  Kind regards

• The port to load my MP3 player is pushed or pulled out and I don't know how to fix... any advice?

  It's a 2 GB Zen Moziak.

  These devices are rarely repaired to the user.  Contact the manufacturer for repair options.

• ESATA cable will not adapt to the port

  I have a laptop HP dv7-4065dx, which has a port eSATA/USB combo.  I just got a LaCie d2 quadra external hard drive, which came with an eSATA cable.  The fine cable fits the port on the hard drive, but I can't get into the socket on the HP.  The shape looks right, but it will not be perfectly just enough.  Seems a little odd and frustrating... are there several types of eSATA cable?  Ill-fitting eSATA ports/cables are common?  I could not find much evidence of either, but who knows.  I'm a little annoyed at the idea of having to buy another eSATA cable just to test.  Someone at - it had a similar problem?  Thank you.

  OK, I managed to do it slow and finally after bending upward the two flanges (brass?) on top of the port.  I thought that's what was being caught after watching closely.

• Tecra Z50-A-12 X is not properly connected to the Port Replicator III

  Hello

  I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator.

  It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using.

  Indeed, the PC sits well in the Replicator.

  Is there a solution or did not have this app?

  Thank you for your response.

  Nice day

  Hello

  Please don't get me wrong, but you should clarify this with Toshiba directly. Here on this forum, you can hear some useful opinions and comments, but I think you should get info straight from Toshiba directly.

  You can also do is to contact the nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope that you will get a professional opinion on this problem.

  Long ago I had a Tecra laptop with port replicator, and he was well in place and really does so port replicator he not there no danger of damage to the small port located in the lower corner.

• hide the port number in the URL

  Hello
  my environment: oracle 10.1.2 AS, with 11 GR 2 cars db (all on Solaris OS)
  
  Application URL: hr.info.com:7777
  
  How can I hide port here. means, I like users to type the address as hr.info.com only & internally, it needs to connect using port 7777.
  
  
  BTW, if I change the port 7777 to 80 then it can be solved. But I would like to know other workaround solutions! If so...
  
  
  Thank you very much
  
  Published by: userR12 on 19 Sep, 2010 14:21

  The best way to change would be to use the Web Cache or SST as proxy in front of your application server. You can configure the web cache to listen on port 80 and passes requests to port 7777. Depends on the complexity of the system on which the application is run. You may even benefit from cache if you decide to javascript and images of the cache if used in your application.

  Note: If you use Oracle Portal, you are already using web cache. In this case, you might consider running the web cache as well on port 80 and port 7777 and use a definition of the virtual host for port 80.

  Thank you
  EJ

• Question of the method of loading.

  I was looking through the accessories for the XOOM and noticed a car with an owner Jack charger. What bothers me. All my other current mobile devices (headset Bluetooth, Droid, and even a GPS which I never use more) all load them via the Micro USB port. Why should I buy and carry MORE cables and Chargers for a XOOM when I already have Micro USB Chargers everywhere? It's kinda bullcrap, IMHO.

  The Micro USB input also charged the device?

  No, the USB port cannot be used for the load. You'll need approved chargers that take the port of loading round for Xoom.

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• The charger cable will not remain in the port of lightning

  I have an iPhone 6 more here about a year, and the last few weeks, I noticed that all my charger cables to remain mounted in the port of lightning.  In order to get the phone to load I really need to put a little pressure on the cable into the phone.  It seems to be the port, not on the cable (I tried 3 different ones).

  Have you checked there is no fluff in the window of light? I had a similar problem where the phone wasn't loading and he had some fluff Pocket compact at the back of the port so that the cable was going on deep in the phone.

  Used a starbucks wooden stirrer split into two (as the metal could damage it) to delicately clean or comrpessed air. Supprised how much came out.

• SG300-10MP no lights at the port

  Today, I got a sg 300-10mp PoE managed switch.

  I plug in the network cable and set an IP address to GUI to the default IP (192.168.1.254)

  the problem is that the port is not see the light when connect you to the laptop. How am I supposed to enter GUI.

  No idea why? Why the port is in shutdown state and not enable?

  do I need to do anything through the console?

  Ok

  First of all, try several ports and if you have another position available, please try this. Also check the cable that you use, it's a good idea to test the cable with another piece of equipment to ensure that you have a good cable. It is normal that the power led is flashing, it will do that while on 192.168.1.254 default IP address.

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?