a database of Oracle 12 c is able to run the Oracle 11.2 clusterware?

We run 11.2.0.2 Oracle clusterware (and 11.2.0.2 databases). This is a failover cluster - 'a CCR node.

Now, we need to run an Oracle 12 c on the cluster server.

Is this possible?

Are there restrictions?

Is it certified?

Compatibility of the versions of database (ID of Doc 337737.1)

Tags: Database

Similar Questions

  • system is not able to run the Apple Application Support service

    I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

    Can you post the error message you get when you try to install or launch iTunes?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • My iMac 27 inches in 2011 are updated Bluetooth V4 and it will be able to run the trackpad V2?

    My iMac 27 inches in 2011 can be upgraded to Bluetooth V4 and I'll be able to run the new trackpad 2?

    Nope' but you can use it plugged in on an old Mac with lighting provided to a USB cable.

    See > https://sixcolors.com/post/2015/10/using-the-magic-trackpad-2-on-older-macs/

  • I do not have the minimum memory required, I'll be able to run the SDK?

    Specifically, I only have 2 GB of memory, half of the 4 GB memory required. I'll be able to run the SDK? I anticipate performance issues, but it will hinder me to the point of unusable?

    It would be like any piece of software.  It is unlikely that the SDK will actually check the physical memory, simply use a lot and they recommend 4 GB or whatever.  My IDE runs a view C++ uses 500 MB.  But if you have a browser open (450 MB), you may have a lot of permutation (the hard disk used as extra memory).   The performance will depend on the speed of your hard drive and then (SSD or 7200/5400) when all apps/os reaches the limit of 2 GB system and thrash.

  • MAF: Not able to run the sample project or a simple project with only one page

    Hi all

    I am trying to run examples of applications of the MAF delivered with Jdeveloper 12.1.3. I am not able to run these applications on the device in the emulator. They gets deployed successfully. However, when I try to open these applications, it hangs on the initial screen of the Oracle.

    I even tried to create a new MAF application with only a device with a page of the AMX. Tried to deploy, but still get the same result.

    No idea what could be the problem?

    Thank you

    Ajay

    Hello

    Problem has been resolved, after the re-installation of the Jdev and MAF extension.

    Understood that somehome, maf - application.xml couldn't refer to the features of the maf - feature.xml. When I created a new feature in the MAF - feature.xml, it was the adfmf - feature.xml and maf-application creation could refer to the functionality of this file.

    This seems to me an installation problem. I have therefore re-installed, now its works very well.

    Thank you

    AJ

  • I'll always be able to run the opening after upgrade to El Capitan?

    I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.

    On El Capitan, you need opening 3.6.  You are currently running opening 3.5.1 or an older version?

    Before you upgrade to el Capitan make a full time Machine backup of you system so that you can return to the Mavericks, if need to be.  (see: OS X El Capitan: revert to a previous version of OS X)

    And check if you are able to update to 3.6 opening.  Check before upgrade you to El Capitan.

    • Open the App Store and sing in your account in the Store with your AppleID menu.
    • The fourth "shopping" tab  Figure opening it to your purchase history?  If so, you can update opening 3.6, once you have upgraded to El Capitan.  If the opening is absent from your purchase history, you will only be able to update with the help of the PapSTore supported.

    See this user Tip: update to Aperture 3.6 after the release of Photos

    https://discussions.Apple.com/docs/doc-8402

    3.6 the opening is the latest version of Aperture and the only one to run on El Capitan.

    There are more and more questions with an opening. Opening 3.6 is running on El Capitan, but keep accumulating the minor bugs.

    • When brushing the adjustments, the position may be a bit off, a pixel or so.
    • The thumbnails in the list view are backwards.  Re: opening and El Capitan OSX
    • If you add a curves adjustment, adjustment to straighten will be not visible in the exported images. See: right
    • The link to the plug-ins page work is no longer in the opening menu, but it's the same for all versions.

    And you can order are no longer produced printouts of Aperture. Apple has stopped completely, the support for Aperture print products in any version of Aperture.

  • I will be able to run the program on the integrated map y50-70

    Hello world

    I want to buy a y50 - 70 for purposes of development, I want to be able to easily run a specific program on the intel integrated HD4600 card, or on the nvidia gtx 560 m-I will be able to do?

    Thank you!

    Yes the Nvidia control panel will help you decide which program you want to run with specific card (embedded or Nvidia), see photo below

    Photo

    By default all programs and play of light / online will work on integrated on-board graphics Intel heavy game will work on Nvidia VGA, but again, you can customize your choice

  • I am suddenly not able to run the Defender on my system vista sp2 Home premium x 64.

    My Defender program does not work because of error - 0x800705b4.  I am running microsoft databases, but I recently had a problem with so-called trojan attack.  All clear now, but that's the problem of the Defender. Any thoughts?

    On Monday, August 16, 2010 18:43:20 + 0000, Scottvisdef wrote:

    My Defender program does not work because of error - 0x800705b4.  I am running microsoft databases, but I recently had a problem with so-called trojan attack.  All clear now, but that's the problem of the Defender. Any thoughts?

    It's not a problem. Microsoft Security Essentials disables Defender
    because it contains the same features. It's good, not bad.

    Ken Blake

  • I would like to be able to run the 4 betas and 3.6 (because of the plugins) - how can I do this?

    4 is good, but I need firebug and other plugins that don't work on 4.

    How can I run them both? (doesn't have to be at the same time)

    One method is to use the portable version of Firefox and use the custom installation option to install on your hard drive. It will automatically create a new profile for the portable version (location where user data is stored). You can get portable Firefox 3.6 http://portableapps.com/apps/internet/firefox_portable or for Firefox 4 beta http://portableapps.com/apps/internet/firefox_portable/test

    Firebug developers are working on a version that works with Firefox 4, you can get it from http://getfirebug.com/releases/firebug/1.6X/ - install the most recent version that there are listed.

  • Not able to run the bios 3CCN16WW update!

    I am trying to install the last update of the bios for lenovo S10 - 3 c o a windows system 7 (I have to update my RAM). But the update ends with the message that the program has stopped working. The details given by the system are also less

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: 3CCN16WW.exe

    Application version: 0.0.0.0

    Application timestamp: 4b0f42d5

    Fault Module name: 3CCN16WW.exe

    Fault Module Version: 0.0.0.0

    Timestamp of Module error: 4b0f42d5

    Exception code: c0000005

    Exception offset: 00022523

    OS version: 6.1.7601.2.1.0.256.1

    Locale ID: 1033

    Information additional 1:8145

    More information 2: 8145a86498ea7bd7c4369bf5b1478377

    Information additional 3:4423

    Additional information 4: 4423454353e7fb7749521da45db49570

    Please someone help to solve this problem.


  • Not able to run the digital cable Advisor in Windows Media Center

    Digital cable Advisor

    I can't get the digital cable Advisor in Windows Media Center in Windows 7 Home Premium.  After I installed Windows back me to the same Setup screen.  From what I read on the program, after installation it is supposed to start.  I checked the Extras Gallery and it does not appear there after installation.

    Chris-

    I started taking screenshots of the process tonight and of course the DCA installed successfully and actually worked!  My system has passed the test.  I tried installing in DCA 100 times before and never had that day!

    I suspect that the root cause was due to a problem with the motherboard that was recently repaired.  At least that's my story and I stick to it!

    Thanks again for your help.

    Buggy

  • How get a 1024 x 768 on Netbook to be able to run the program.

    I am using Windows 7 on my netbook.  I have a monitor generic PnP, mobile PC screen.  The only screen resolution option I have is 1024 x 600.

    I need 1024 x 768 to launch my new program.
    How can I do?

    If you have the good updated video driver on your netbook, and it is the highest resolution support, there is no native way around it.  Netbooks were limited in some respects and inexpensive and generally do not have video support very high-end.
    You might look into video USB cards.   If you have Windows 7 starter edition, however, there are some limitations on the use of several monitor that could be a problem.

  • not able to run the cursor

    declare
    cursor ccns is
    Select b.bname. 'borrowed ' | TO_CHAR (c.the_count) | Decode (c.the_count, 1, 'time', 'times')
    Book b,.
    (select count (*) the_count IDB
    borrowing
    Group submission
    ) c
    where b.bid = c.bid
    CTS ccns % rowtype;
    Start
    Open the ccns;
    loop
    ccns FETCH in cts.
    When the exit ccns % notfound;
    dbms_output.put_line(' ');
    end loop;
    close the ccns;
    /


    the o/p should be displayed as the bookname bought 1 times
    BookName bought 1 times
    BookName bought 1 times
    can someone help me please?

    You must give an alias for the selected expression, so you can reference it in the record type. I have an alias for 'val '. Then you can get out cts.val

    set serverout on size 100000
    declare
      cursor ccns is
      select b.bname || ' borrowed ' || to_char(c.the_count) || decode(c.the_count,1,' time',' times') val
      from books b,
          (select bid,count(*) the_count
          from borrowing
          group by bid
          ) c
      where b.bid = c.bid;
      cts ccns%rowtype;
    begin
    open ccns;
    loop
    fetch ccns into cts;
    exit when ccns%notfound;
    dbms_output.put_line(cts.val);
    end loop;
    close ccns;
    end;
    /
    Hello borrowed 3 times
    World borrowed 1 time
    
    PL/SQL procedure successfully completed.
    

    But it is better to use a cursor for loop - Etbin response on the other thread works, with the exception of DECODE it.

  • Not able to run the procedure

    Hello world

    I am trying to execute the procedure below,

    CREATE or REPLACE procedure test1 (n1 n2 in number, number, tot OUT number)
    is
    i the number: = null;
    Start
    loop
    If n2 > n1 then
    i: = i + 1;
    tot: = n1 + i;
    dbms_output.put_line (tot);
    elsif n2 < 1 then
    dbms_output.put_line ('enter a higher value for n2');
    end if;
    end loop;
    end;
    /

    All I'm trying to do is to print the numbers according to the values we give during execution, but doesn't seem to work for me.
    IE.,.

    N1 = 1;
    N2 = 5;
    tot = 1,2,3,4,5;

    I'm sorry if there is a mistake in the procedure and would be really grateful if you can help me with this. Thanks in advance for your help.

    Published by: Pravin on August 31, 2010 14:25

    If you want you can use this code it has the same logic

    CREATE OR REPLACE procedure test1(n1  IN number,
                                      n2  IN number,
                                      tot OUT number) is
      cnt number := 0;
    begin
      if n2 < n1 then
        dbms_output.put_line('Enter a higher value for n2');
      end if;
    
      for i in n1 .. n2 loop
        dbms_output.put_line(i);
        cnt := cnt + 1;
      end loop;
    
      tot := cnt;
    end test1;
    
  • Not able to run the NVL function in the data model

    I tried to use NVL today in the data model, but I got the error message.
    Here's the code: -.
    SELECT ROUND (WHEN BOX: MO_TARGET_DISP_RATE > = 100)
    THEN 100
    (TO ANOTHER NVL (: MO_TARGET_DISP_RATE, 1) END, 2) AS "TARGET_PC_MO".

    Y at - it another option to replace NVL here... that runs in the NOSE? Thanks in advance.

    Just a suggestion, try a view then refer to the display in the data model

    (SELECT (ROUND (CASE WHEN to_number(:MO_TARGET_DISP_RATE) > = 100)))
    THEN 100
    Of OTHER NVL (to_number(:MO_TARGET_DISP_RATE), 1) END 2)), double) My_field

    The error was not a tank for the error number was or media...! If so above should be ok...

Maybe you are looking for

  • Airport Extreme Multiple Port forwarding

    Y at - it anyway to implement multiple ports to one only volume, for example, that I need to set up port 55000 to 55999 and 56000 to 56999. Is there a way to put it, so I did not open them one by one?

  • C310 printed fine when first installed the printer... now I can't print

    I have the new C310 series printer. The installer went well. Print test page, word document and a photo... all great.  Now, a week later, when I try to print what it's that sounds as if it was printing (I hear cartridge move, sounds normal 'printer')

  • Wireless, Ethernet normal slowdown!

    I run broadcom 1350 (also tried to 1370) on a dell inspiron 1150. In the last few weeks my Wireless has slowed down (.5 Mbps to 5 Mbps download), even if my upload speed on wireless and all about ethernet normal rest. Any ideas on what to check?

  • 2nd declining print document P713w

    Hello The printer refuses to print more than one document. When having more than one document in the queue, after you print the first document correctly, the printer feeds the paper to the second document, but then stops. The documents are kept in th

  • Age of Mythology on Windows 7

    I have Age Of Mythology Gold Edition and still can't make it work on my Windows 7 x 64 box. When I start the game it returns an error that MSXML4 is not installed correctly. I tried to configure MS XML parser of the installation of the game disc, but