A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

Similar Questions

• Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Wow! It worked! Thank you very much! You just saved me buying a new verion of Lightroom (which is of course why Adobe does not update these profiles automatically).

  Thank you very much!

• Install a non-of a Dell Poweredge 2850 server operating system

  Hello everyone.

  I was wondering how I could go about the installation of operating system, including Windows 7 and Windows XP on my server. I understand that they are not made for the server, but I would use Windows 7 instead of the server operating system. Windows XP is an option, but I'd rather not, if I have to

  Stick the DVD in the drive and start to install.  Chances are that Windows 7, like server 2008R2 will NOT have the drivers for the controller RAID (PERC 4e/Di), so use the driver 2008R2 for the RAID controller (and any other device requiring disks after installation).

  Controller RAID PERC 4e/Di to 2008R2 driver:
  http://ftp.Dell.com/SCSI-RAID/LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe

  Also keep in mind that PERC does NOT support non-RAID, so you MUST configure RAID before installing, or even with the right driver, no hard drive is visible.

  Potential problems:

  Graphics - you should probably use the drivers of graphics/video 2008 x 64 for a decent resolution.  Keep in mind that server (such as 16 MB video memory) graphics will run NO Aero or high resolution/refresh.

  DRAC - if you have a DRAC (Dell Remote Access Controller) card installed, you will not be able to install drivers to meet these devices in Device Manager.

  Management system - software of management of Dell is NOT supported on the client OS.

  Other:

  In the 2850 processors do NOT support the VT, then you would be very limited with virtualization options.

  Sounds: there is no sound on a server.

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• My TalkTalk email keeps asking for a password, I connect but it does not connect.

  Since yesterday my TalkTalk email started asking for a log on password, I click on accept and the log on process starts, but it does not connect to Talktalk.

  I don't receive mails, but I can send!

  Concerning

  Problem solved it was because of the password being connected with the phone account!

  Concerning

• Assistant of migration used just one new imac and now cc does not work!

  Please help I just transferred all of old imac to a new imac with the migration but assistant now cc does not work, I got error message saying: "cc is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy of the cc. "Well I've done a few times now and re mac began and also updated but still say the same thing.

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Let us know if that helps.

  Kind regards

  BANI

• I transferred CS5 to a new computer using the PC transfer program. CS5 starts on the new computer, OK, but now does not recognize raw files. Should I uninstall and reinstall again?

  CS5 I transferred to a new computer using ultimate PC mover. CS5 seems to start normally, I had to insert the serial number of my original CD. However, now, the program does not recognize files CR and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer by using the original CD, and then reinstall CS5 using the CD on the new computer?

  I finally got to work. I had to load the files CR of adobe several times but it finally worked. Thanks for your help.

• OTP-S5100 - "unable to start the server" - but he DOES not see my computer!

  I had a devil of a time with this option. Finally, and without provocation, the ability to reference the media from my computer suddenly started to work a couple of months. However, as I add new video files, new files do not show upward (but in the same directory as the others). Finally, I tried to move all files to a new directory and then he set up through media center to access this directory. It worked fine, but then the same thing again - new files, but that it would not come up on top of the list.

  Ended up trying to move all the files a cople of days earlier in another directory again. Now, the unit sees my computer, but it is grayed. When I click on it, all I get is a screen that says "failed to start the server. Wait a few moments, and then reselect the same server or put the server media market. "Then, of course, I closed the PC & BDP several times, but does not. Just a list of my computer all the gray.

  I checked the settings of my PC (Windows 7) - Home Group (check), automatic WMP streaming (check), firewalls (none... check). New programs (none... check). Nothing seems to work.

  A big hug of gratitude to someone out there who can tell me what's happening!

  Thanks in advance!

  You may need to update your content to media library... I don't know how, but I use Tversity and I must have analyze directories from time to time.

• I tried to use my iPhone6 for apple pay but its does not work. Is it because I have a phone cover?

  I was trying to use my iphone6 pay in store but its does not work, it's because of the cover of my phone

  Hello

  Make sure that you follow the right process, including how you present your iPhone to the reader.

  More information:

  Set up and use Apple pay on your iPhone or iPad - Apple Support

  It can help keep your iPhone very close to the player.

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top.  However, when they put in place, the partitioned the C: drive with so little space that it is running out of space.  We got a newer Dell server and I turned that 2850 off the coast.  It was interrupted for a month or two.

  But I would like to use it as a backup of database server.  Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  You need to install RAID drivers during the installation of 2008R2.

  1. Configure and initialize the RAID in the CTRL-M utility.
  2. Download and extract the drivers put on USB (or CD).
  3. Start on media 2008R2.
  4. On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
  5. Navigate to the location of the RAID drivers.
  6. Choose the drive to install, then install.

• Dell Poweredge 2850 and ESXi 4.1

  I have a Dell PowerEdge 2850 with 12 GB of RAM and two CPUs, hyperthreading with 350 GB of disk space.

  This box was initially installed with Redhat Linux ES 5.4 64-bit and OS 64 bit CentOS 5.5 with no problems, so I know the processor supports 64-bit.

  I then installed VMWare ESXi version 4.1 on the Dell Poweredge 2850 with no problems.

  Then, I created a few instances VM I want to install CentOS 5.5 64 bit.  During the installation of a VMware instance, I get this:

  msg.cpuid.notLongmodeQuestionFmt:This veritual is configured for 64-bit operating systems.
  However, the 64-bit mode is not possible.
  Longmode is disabled for this virtual machine.
  For more information, see http://VMware.com/info?id=152
  Continue without 64 bit support?

  Now the question I have is this: given that VMWare is problems with 64-bit OSes comments, how is it that I can install CentOS 5.5 64 bit on this Dell PowerEdge 2850 with no problems.  It seems obvious to me that the PowerEdge 2850 works well with the 64 bit OS but not ESXi 4.1.

  How can I get around this?

  Comments?  Thanks in advance.

  The dell series 8 (1850/2850) have no vt support, so not support 64-bit virtual machine, except 6850.

  The output of the processor shows the same thing, or rather, what he shows no vt in its ability.  It shows lm, long mode, so you can run 64-bit, that you are running ESX, but to succeed in this 64-bit support, you need the lm, you and vt, which you don't have.

  -KjB

• ESXi 4.1 - Dell Poweredge 2850 - tape backup - host does not support configuring passthrough

  I'm trying to get a tape backup to work on my ESXi host, so I can save my win2003 VM.  I get this error under VMDirectPath, 'host does not support configuring passthrough ".  Under Configuration > storage adapters > I don't see my tape drive listed.  Also, I noticed that my SCSI controller card is NOT on the HCL (Adaptec 39160).  See.  This is probably why passthrough doesn't work.

  So, I was thinking of buying this one (Adaptec 39320) because he seems to be on the list.  This will solve my problem or is this server too old for passthrough to work?

  To use VMDirectpath on an Intel Server chipset used must support Intel VT - d (Directed i/o).   I don't think that's the case with the models of 2850, but if it was you would see an option in the BIOS to enable this.  It is a separate option of VT - x, which allows the host run the 64-bit clients.

• Dell PowerEdge 2850 does not start on a CD of ESXi 3.5

  Hello...

  I have a Dell PowerEdge 2850, who does not start on a CD of VMware ESXi 3.5.  The server works very well with Windows 2000 server.  My first thought to solve this problem was the BIOS.  This is all what I've updated in what concerns the firmware on the box today.

  BIOS - A07

  Perc4e/Di - 5B2D, A19

  BMC Firmware - 1.83, A10

  Here are the latest versions of firmware available from Dell on this box.  The machine starts to start the machine.  But all I see is the first line of text of the CD which is the following:

  ISOLinux 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  My next thought was that there was something wrong with the ISO image that I downloaded.  I tested it on another machine; has worked like a champ.  Now, I read on a few different posts within the VMware communities that some people have had luck with this question and others did not.

  The inventory number of Dell on the machine is 6HDGS81

  Any advice would be greatly appreciated.

  Some of the Dell CD-ROM may be little flighty. I had hard time to install a CD earlier which worked perfectly well on another machine. I made another copy of the disc, this time burning the CD at a 4 x speed. The installation went perfectly fine afterwards.

• How many processors the TimesTen on Exalytics can be used for the operation of 1 request?

  Dear

  I am analyzing the deployment scenario (2 t, 40 processors) Exalytics cluster - two machines.

  After reading the discussions on this forum and a part of the documentation available for my Oracle Partner login information.

  A doubt is:

  When you run SQL against TimesTen.

  To search for and return the data - OBIEE server, the TimesTen will use as many processors in this operation?

  Thank you

  MMB

  TimesTen (11.2.2) currently does not support a parallel query, so a single query will use one processor, but it will still be very fast because of the nature in memory of TimesTen. And you can run 40 these applications simultaneously without overloading the machine.

  Support for a parallel query is in our roadmap for a future version.

  Chris