A digital control takes no account of the limits of data at entry entry is typed, why?

Similar Questions

• How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?

  How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?

  To print the black ink only follow the steps below.

  1. Select Start menu
  2. go into devices and printers.
  3. right click on the printer, select printing preferences
  4. in the lower right corner, select Advanced
  5. and then under features of the printer select print grayscale a dropdown list will appear to black ink only.

  Let me know how it goes.

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.

• Reconciliation of accounts preprocess the handler - recon data location

  Hello

  I need to transform one of the attributes in the reconciliation of accounts on the target system. I wrote an event handler to pre-process and I tried to analyze the data of the orchestration in order to find the data structure to change to the desired data transformation - but I am not able to locate the data structure with attributes of reconciliation.

  Worm in the IOM is 11 GR 2 SP2

  The recon works, are properly reconcile the changed data in TS in IOM.

  Can you help me? Where should I look for the reconciled data?

  Best regards

  Peter

  Preprocessing does not trigger on reconciliation. It is in the BulkEvent postprocess. You must create a transformation of reconciliation adapter if you want to change the incoming attributes.

  -Kevin

• Control of user account on the same program keeps popping up

  Hello

  I have window 7 and have a problem with user control box account never ceases to appear asking "Do you want to allow the following program to make changes to this computer", always on the same program, which is:

  Name of the program: a tool to help prepare their services for Windows NT

  Verified Publisher is Microsoft windows or Java.

  I always go into the 'no', because I don't think that Windows NT has nothing to do with my Windows 7. But it keeps popping up. How can I stop this?

  A quick search on Google suggests that some Garmin program is the cause of this message.

• Movie clip mask does not take into account, exceeds the screen

  I have a textbox that accepts data from the internet, and I turned it into a clip. However, when it moves, it goes on top of everything else and don't know the mask I have put on. suggestions?

  Click on the textfield mealList and incorporate your policy.   then make sure your text is loading.

• I'm trying to set a password on my administrator account. The message "Windows cannot set a password" appears. WHY?

  Why WINDOWS usually allow me to set a password on my own administrator account?

  Hi KristinMarker,

  ·         Which version and edition of the operating system is installed on the computer?

  ·         Remember to make changes to the computer, after which the issue started?

  In the meantime, try the following steps and check if it helps:

  (Applicable to limited editions of Windows)

  a. right click on "Computer" (Windows Vista or Windows 7) or "My computer" (Windows XP) and click on 'Manage' to open computer management.

  b. in the left pane, expand 'System tools', and then expand local users and groups.

  c. now click on "users".

  d. in the right pane, right-click on your user name and select Properties.

  e. uncheck "user cannot change password".

  f. click Ok and then close the computer management console.

  I hope this helps.

• Is it possible to ignore some accounts during the loading of data

  Hi, I have a rules file that I use to load the data.

  I want to ignore some accounts (only for now 112123, 123453, 546567) during my loading of data.

  is there a way to do... ?

  Thanks in advance

  Check by using a rules file to perform operations on documents, fields, and data

  Rejecting Records

  You can specify which fields Essbase ignores defining criteria of rejection. Rejection criteria are string and number conditions, when met by one or more fields of a record, causes Essbase refuse registration. You can set one or more criteria of rejection. If any field in the record meets the criteria of rejection, Essbase loads the record. For example, to dismiss the actual data from a data source and load only the budget data, create a rejection criterion for rejecting the records where the first field is real.

  Concerning

  Celvin Kattookaran

• Control the order of (date of entry-boxes)?

  I have several < cfinput > controls placed vertically (using an HTML table).  They are 'date' with the beautiful calendar drop-down fields.

  Problem is... when the calendar comes down, it goes down behind the calendar under control.  This obscures the bar the name of the month and almost prevents access to the buttons previous/next month.

  So I was wondering: is it easily and conveniently possible to control the order of the drop down calendar, so that it appears in front of all?

  (P.S.  As usual, "it works fine in FireFox and breaks in IE."  No surprise there...)

  This work around should solve the problem (even though its boring that we have need of a workaround for this):

  
  
   
   
   
   
   
   
   
   
   
   
   

  Date 1
  Date 2
  Date 3

• How to change the color of the elements of a digital picture (separately) programmatically by using the property node?

  For example, I have 3 digital controls, controlling 3 digital array elements (digital control is connected directly to the indicator). So if I change value in digital control 1, then the table item # 1 of the digital table should blush when the value is greater than 5. Similarly when I change NUM controls 2 item 2 of the table should turn red when the value control num 1 exceeds 10. Similarly for the 3rd element. In other words, I want to control the ownership of the elements of the array individually through the digital command separated.

  I did it for unique digital indicator.i.e. When I change the values of the control, then a single digital indicator changes color (text digital property BG) and with table values, changes the color of the entire table, but I want to change the color of the singles of the table element.

  Please help thanks.

  I hope you do well! You cannot change the properties of elements of an array. What you could do instead is probably using a table where you can change the background color of a cell?

• Update of digital control with different values with array function

  Hello

  I have attached my code base. I want to execute the code for 2 sets of digital control with a gap between the two values, then pass it. Something like that

  ABC

  Initialize the P1 = 10; P2 = 20; P3 = 30; P4 = 40

  Run the code

  delay = 10ms

  Update of P1 = 150; P2 = 200; P3 = 350; P4 = 500

  Run the code

  jump to abc

  I am stuck how can I update the values of P1, P2, P3, P4? I thought about using a function table but couldn't go further.

  Thanks for the help,

  Ana

  Hello Ana,

  One way you might achieve what you are looking for is using property nodes. These property nodes will allow you to change the values of the block diagram control. You can set up a structure of case inside your loop that will change control through nodes of property value after a certain number of iterations. Here is a community sample that shows how to use the nodes property to change the Boolean controls:

  https://decibel.NI.com/content/docs/doc-22669

  -Erik S

• Pages within the limits of the Application

  Is there a limit of pages in an application? I will generate pages for my tables, 4 pages for each table. I have more than 300 paintings. I have therefore 1200 pages in my application. Is this possible?

  Hello

  There is actually no upper limit on the number of pages that can be created in one application.  You could have 1 million pages in a single application, if you wish.

  As said by others, there are a few other considerations you may wish to take into account, to the development and maintenance of these a little bit easier.  But with respect to a limitation on the number of pages in an application, there is not.

  Joel

• Set the date value pick for a component of Date of entry.

  Hello
  
  Am using jdeveloper 11.1.1.6.0
  
  I slipped and fell to choose Date and Date component.
  
  When my user selects the vale of the ChooseDate component, it must be included in the component of Date of entry.
  
  Could someone help me pls?
  
  Kind regards
  Prasad K T,.

  Hello

  Take a look at the property of chooseId: http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12419/tagdoc/af_inputDate.html

  Frank

• Cannot type the password in the user account control prompt after activation of the hidden admin account.

  Original title: where to type the password of the user account control?

  I have a problem of user account control is it said to type an administrator password, but there is nowhere to type in it. I can't access anything on my computer because there is a password. My computer does not have an administrator account and I can not activate the administrator hidden with UAC on because I can't type the password. Where to enter it?

  Hello

  System Restore can probably help.

  To restore the system from DVD

             

  a. start the computer from the Windows installation disc

  b. Windows will automatically run the disk is empty, and will load the files; This can take some time. The

  c. Windows Vista install will begin charging.

  d. now, select your installation language, time and currency Format, and keyboard type and then click "NEXT" to continue.

  e. in the next screen click 'Repair your computer' to continue. Windows will now search an Installations of Windows.

  f. on the next screen, select the operating system on which you want to do a repair. Select it, and then press 'NEXT' to continue

  g. you are now in the menu "Recovery Options.

  h. in the 'Recovery Options' menu select 'SYSTEM RESTORE'.

  i. the menu "Restore files and settings" is displayed, click 'NEXT' to continue. Now in a 'Restore Points' selection select one that you want to restore too. Then click "NEXT" to continue. You are now given an option to restore the other disks as well as the operating system drive. If you have no problem with them, then just restore the main drive.

  j. now, you will need to confirm the restore point. Click "FINISH" to continue or "BACK" to select another drive or restore point. You are now prompted one last time to confirm that you want to continue. Click 'YES' to continue or 'NO' to select a different drive or restore point.

  k. 'System Restore' will boot now.

  System Restore will now restore files, finalize the restoration.

  Once this done, tell whether she succeeded it, if so click "RESTART" to restart the computer, if it's not then try a different date.

  Once rebooted and you get on the desktop, you will receive a confirmation of the success of restorations. Click 'CLOSE' to continue.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Try to recover the control of an account of a hacker Hotmail.

  How can I get control back to a hacked Hotmail account?  The hacker took all ten "Alternate emal address" and whenever I change the password, the hacker somehow tha takes account back.  I'm guessing that he refuses the new change of password.

  I have all the appropriate information required to obtain a temporary password for Hotmail, but when I try to remove the fake "e-mail addresses" I am unable to do so.  Because the pirate took all ten, (which seems to be the limit), I can't add more email addresses or even a phone number.

  Thanks for any help.

  Unfortunately, this forum is not for Hotmail - they have a forum dedicated to issues where you will receive the best assistance. When you start a new thread on their forum, you can copy and paste your question above.

  Hotmail support:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Compromised account - unauthorized account access:

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41