A few newbie questions

Similar Questions

• A few simple newbie questions

  I've been running Windows Home Server on an old Dell Zion (Yes - quite pokey), I see that Dell has many things on an I3 PowerEdge T110 II. I did a lot of search in the online documentation and manuals, but have a few unanswered questions:

  o the server has a built-in SATA controller? The manual says 6 SATA connectors, but when I tried to configure the server for the purchase, it was persistent to choose me a PERC controller card. If there is a controller of the motherboard, will it be enough?

  o once again, trying to set up with UEFI boot, he said conflicts in configuration. I am the command without hard drives, but to use an existing drive to 4 TB. I'm going to need to configure GBT and will require UEFI, I think. Is this a problem?

  o any person aware of all the problems with Windows Home Server 2011 running on this platform?

  They are sold individually as no disc/OSless as the default configuration. That's fine, but I wanted to buy a couple of company drives to go with it. When I tried to configure the system with hard drives, came when all configuration conflicts. I'll try to call tomorrow, but I think the community is generally better informed than the sales people. It looks like I'll buy the unit without disc and add my own records. Recommendations for hard disks that are reasonably reliable (and cheaper than Dell)? I want to run RAID 1.

  My 'adventure' is about to begin. Thanks for the help!

  Al

  achuneke

  The server has a built-in SATA controller? The manual says 6 SATA connectors, but when I tried to configure the server for the purchase, it was persistent to choose me a PERC controller card. If there is a controller of the motherboard, will it be enough?

  Yes, he does. Don't forget to check the Onboard SATA under hard disk Configuration option. If you enable RAID, you will get the S100 controller... let off RAID and use RAID software Windows instead.

  achuneke

  Yet once, trying to configure with UEFI boot, he said conflicts in configuration. I am the command without hard drives, but to use an existing drive to 4 TB. I'm going to need to configure GBT and will require UEFI, I think. Is this a problem?

  You can't order a server without a disk (see below *). If you plan to use your own, order it with the most small/less expensive available drive, then swap later. You have NO need to specify a UEFI/BIOS at the time wherever you order the server if you intend to swap the hard drive or install the OS yourself.

  achuneke

  Anyone aware of any issues with Windows Home Server 2011 running on this platform?

  I don't see any, other than the fact that he didn't is not officially "supported", so you may run into issues at some point, but I suspect that there won't be any.

  * You said they sell it "diskless", which I have never seen. If you can, great, but if not, see my comment above. Business records are only needed if you use enterprise-class RAID controllers. Do not use the S100... is not (is not) a "business" class RAID solution

  'Real' RAID controllers (like the PERC 6 / i or H700) are not supported in the T110 II, so you don't ' really need to business records. Some have reported PERC 6/7 works to T110 II, but it is not supported, and if you choose to go this route, then make sure you have some good records designed for these controllers.

• Newbie question - passing variables (aka why this work?)

  I spent a few hours in vain trying to pass the value of a html text box to a coldfusion page 2nd via the URL (query string).

  However, it seems that I can't do this because the 2nd page seems to be able to reference the value in box of text in any case.  My question is: is this a coincidence, or is this the normal procedure, things work?  When I click the "Run report" button, everything I typed in the text box appears on the screen of page2.cfm.  I thought I should pass this value somehow (via the variables session or the URL string or something).

  So my newbie question is: is this the way it should work (a simple answer Yes or no is fine)?  A text from one box. CFM file can reference the value of text box on the other. CFM page? Thanks in advance

  Here is the page 1 (page1.cfm):

  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / BY" > ".
  < html >
  < body >

  " < CFform action = ' http://www.mywebsite.com/page2.cfm "method ="get"> "
  Cust ID: < cfinput type = "text" name = "CustomerID" >
  < input type = value = "run report" >

  < / CFFORM >
  < / body >
  < / html >

  Page 2 (page2.cfm) here which works fine and shows what I typed in the text box:

  < CFOUTPUT >
  #CUSTID #.
  < / CFOUTPUT >

  I was already typing this until Ian replied. But I may as well post it in case it helps...
  

  > I spent a few hours * in vain * trying to pass the
  > value of a html to a coldfusion page 2nd text box via the
  > URL (query string).

  If you know that he or she is actually what you 're doing.

  "> http://www.mywebsite.com/page2.cfm" method = "get" >
  > Cust ID:

  When you use method = "get", the form field, the variables are passed in the query string. So, if you enter "abc" in the text box, the URL submitted will be:

  http://www.mywebsite.com/page2.cfm? CustID = abc

  So 'CustomerID' will be available as a variable within the scope of the URL on page 2.

  > * Here's page 2 (page2.cfm) which works fine and shows
  > what I typed in the text box: *.
  >
  > #CUSTID #.
  >

  The reason for which he works is a little magic CF. The variable #custID # not be bounded, CF search this variable in a predefined list of staves (see link below). It looks in each of them, and uses the first value it finds. Although not the exact search order, CF will check the

  http://livedocs.Adobe.com/ColdFusion/8/Variables_32.html
  -VARIABLES in scope (at the time..)
  -Reach URL (at the time..)
  -FORM scope (at the time..)
  ... etc...

  In your case, the variable exists in the scope of the URL. If your code is equivalent to saying

  #url. CUSTOMERID #.

  It is in fact a practice better coding. Although the original code works without the scope of variables, providing an explicit framework is more efficient and avoids unitentional errors.  For example if the code on page 2:

  
       #CUSTID #.

  ... the output may not be what you would expect ;-)

  So to answer the question: Yes, that's what must happen.  However, you must explicitly scope your variables page 2 IE use #url.custID #.

• new newbie question

  A few background questions: I'm new cs4, Web page design, so I decided to give it a go and have a bit of frustration but love all the DW. I did not any computer of programming since the BACK on a commodore 128 in high school... Although w3schools, adobe tv and youtube are moving me... lol

  I use 3 columns locked with header and footer

  1. I added a table to the my content, just below the title of the content and three photos.  Each photo (jpg) is taken from my site images folder and inserted in the top row.  They were previously seen on the design and mode live view and preview in the browser but now just shows Design view and does not appear in mode live view or seen by Preview in the browser. I deleted and reinserted them without change and I've debugged and have no problem but me being a novice... what I am doing wrong or is - it a bug and some simple, easy for a guy not experienced to understand?

  2. can you use the panels reducible spry in a table?  I tried earlier and my site got weird on me, so I removed it.  I already have my nav, so it would be more than a list of data in the area of the environment page?  Can I use the data list instead?  I like the idea that it is reducible to a type of menu.

  I have also read through the forums and hats help for us newbies

  Thank you

  I can't see your pictures so I have no way of knowing which ones shows and those who don't.  This is why it is so much better for us if you download the page to the web server and that you post a URL for us to see.

  In your code, I see problems with path. You have this in the header:

  Followed by here later on (notice the first slash images before?):

  and this in your footer (no slash leader before the images):

  I hope that this will put you on the right PATH.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• change the driver existing (newbie question)?

  Hello

  We try to change an existing driver, but we are fairly new to Labview. We have a few generic questions, but I'll give you some specific info on what we are trying to do as well.

  We downloaded a driver (for NDI Polaris motion tracker) of the site NOR and want to change that a little bit.

  The zip file contains a subdirectory ndipolaris with 2 files .llb and some .mnu files.

  Our first problem is that if we just open the .llb files, there are a lot of vi in there (including examples of work), but there is no project files, or class definitions. What seems to prevent us from creating a new class that derives from a class that is apparently set in the driver (but which we don't seem to have the definition). Maybe a driver can be distributed without these definitions such as you can use it only, but not change?

  Our second problem is that if we use the method of 'create the new existing driver driver', the Polaris NDI does not appear in the list of existing drivers. (It has copied the directory ndipolaris to the labview/instr.lib directory and restarted labview). (This is probably not a major problem that we could change just the existing driver instead).

  Note that the existing driver works well. We just add a timestamp in the data. The existing driver apparently has a class (called "Info Tool", which is a cluster of a few different types of data) for all these info than the Polaris returns, so we thought to change this class or to derive a new class with added timestamp.

  Sorry if this is a trivial question. Thanks for the pointers.

  Kris

  Hi Dennis

  Thanks to your suggestions, we settled it. We were baffled by the fact that you cannot add controls for "schema". Here's what we did:

  The data group was built using the "bundle by name" function, which takes a bunch of 'model' as input. It is this model that we had to change. However, as the model was a 'constant', it does not appear on the front panel and so we could not add any controls to it. For example, when you view the block diagram, we right-click on the clustering model, converted to a control, and then passed to the façade, created a new control (string) on the front panel and place in the control corresponding to the cluster model. Then we moved to the block diagram and convert our cluster model to a 'constant '.

  Not simple I think, but once you know (get help from you and read a bit of the operating instructions...), it's ok.

  Thanks again

  Kris

• Hardware blackBerry Smartphones Dumb newbie question! :)

  Hi people,

  I'm new in the world of the blackberry and I'm about to take the plunge with a unlocked sim-free BB Bold to use in the United Kingdom on Vodafone. I read on the differences of software between BIS and BES and would go for a set - up BIS. My dumb newbie question is equipment arrives in version BES or BIS or not?

  Thanks in advance and do not hesitate to make fun of my madness

  craigdh wrote:

  Good answer Xandrex. However I'm still not clear as to the issue of equipment, I asked. The reason why I am wanting to buy "BOLD" a separate contract is.

  1. it will work a little cheaper over the life of a contract.

  2. I will get my "BOLD" much faster.

  3 UK networks have a reputation for crippling features in high-end etc phones then charge you more to get similar functionality via one of their services.

  4. they are very slow to provide updates of the firmware on their own brand of appliances.

  There was a little insinuation in my answer: basically, you buy a mobile phone, so you get a BIS/BES contract with a carrier who takes in charge that the mobile phone. A "BOLD" can be used like BIS or BES, it depends on the company.

  On the price, I'm sure the phone deal + contract is always cheaper than a "BOLD" (retail and not eBay from some guys) then a contract which is usable (that is, no GoDaddy or 0.01GBP / KB).

  for the speed, you are the one who knows.

  The thing of the cripping: the thing is, the updates are provided only by the suppliers (they get a barebone RIM OS, then add their stuff like facebook or AOL). Even if you buy a single "BOLD" without a contract, if you want to upgrade the regular way, you wait fot your carrier to publish the upgrade. Or you can do the regularly (which can be made with or without the purchase contract at the same time).

  HTH

• 2 blackBerry Smartphones newbie questions: do I need it, and how I spoil my phone?

  Sorry for the newbie questions:

  My IT has already set up my phone to receive email from their Blackberry Enterprise Server.

  (1) do I still need to install the desktop software?  Given that I can transfer files via Bluetooth from my laptop and my contacts/calendar/notes are stored on the Exchange Server, is there any point?

  (2) if I do not need to install it, given that my email is already working with BES, and the Office installation configures email settings, how do I keep the new Desktop install to mess up the current configuration of e-mail?

  Of all the notes of support on the software, looks like more trouble whereas at this stage.  I really need to treat it?

  Thank you.

  Janimal

  Hi and welcome to the Forums!

  Janimal wrote:

  (1) do I still need to install the desktop software?  Given that I can transfer files via Bluetooth from my laptop and my contacts/calendar/notes are stored on the Exchange Server, is there any point?

  There is not much need of DTM, but it is convenient to update the OS of your BB. Sometimes there will be releases of minor bugs corrections and such to your BB - DTM will be meaningless and install them, while updating wireless could not detect them. For a major OS update, you want DTM, as it will do a backup/complete restoration of your BB, including configuration settings, and others so that you don't have to redo those. But, to your e-mail, calendar, contacts, etc. - you are right, it is useless given that your Exchange Server is actually your master with your BB being actually a backup of that (in a sense).

  In addition, USB drivers (which are part of the package DTM) are necessary in order to charge your BB via your laptop USB. You can download and install all the USB drivers if this is the only part of the DTM you want.

  Janimal wrote:

  (2) if I do not need to install it, given that my email is already working with BES, and the Office installation configures email settings, how do I keep the new Desktop install to mess up the current configuration of e-mail?

  When you install it, it will ask if you are in a company - say Yes and it will install properly. Installation when your PC is connected to your corporate network and your Outlook is open. Who will get the best and fastest configuration. When you install, do not let it select the functions of auto-launch... If you wish, attach your BB and manually run the DTM.

  Of all the notes of support on the software, looks like more trouble whereas at this stage.  I really need to treat it?

  Thank you.

  Janimal

  Basically, on the whole, I vote 'YES'. You get the USB charging. You can save if you wish. You get the device OS and other updates. Most of the reported problems are people using it to synchronize via USB things - you won't do that because most of your stuff will be syncing via BES OTA. Other things, you can simply drag-and - drop (music, videos, etc.). .. .follow these instructions (use the latest 5.0 DTM):

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=3...

  DL the latest version here:

  http://NA.BlackBerry.com/eng/services/desktop/

  Good luck!

• A LOT of Newbie Questions blackBerry smartphones. (Must be the easy answer!)

  Good, please excuse my ignorance... guys xD

  I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:

  Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.

  Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.

  Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?

  Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).

  To buy another memory card: Where the best place to buy one of these mini memory cards? One of my friends like, a 24 a concert... and I currently have a 2 gig (who, I should mention, is more fricken memory I have in the computer I do not write about this time xD) how can I find out if the card is compatible with my camera?

  WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?

  Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?

  
  

  Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?

  Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD

  
  

  Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?

  Speaker?: How can I get speaker? xD

  Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD

  Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.

  Thanks for looking, and I warned you... they have been the newbie questions! xD

  -Darky Delacroix

  Welcome to the SkippyTheWonder forums.

  SkippyTheWonder wrote:

  Good, please excuse my ignorance... guys xD

  I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:

  Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.

  Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.

  Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?

  There may be an icon on the home screen of your camera to buy ringtones. Or you can open the browser and go to http://mobile.blackberry.com. There is a link of ringtones that you can click

  Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).

  It is recommended to buy a microSD card to store your multimedia files, if you run out of memory on your device.

  
  

  Depending on what OS is your BlackBerry tells you what size you can buy a microSD card. You can check under Options | Topic (will appear as v4.xx.xxx). Look at the table on the following link to see what size you can get - http://www.blackberry.com/btsc/KB05461

  
  

  On the BlackBerry, go to Options | Media Media Card recommended parameters are:

  
  

  Media card support: WE

  Encryption mode: NO

  Mass storage support: WE

  Auto enable mass storage Mode when connected: YES

  
  

  Mass storage mode allows your BlackBerry to act as an extra drive when it is connected to your PC. It will appear as an extra drive letter in Windows Explorer. So you can just drag/release the multimedia files on your memory card

  WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?

  Here is an article that describes the status of the LED

  http://www.BlackBerry.com/BTSC/KB03897

  If you want to disable the LED check this KB article

  http://www.BlackBerry.com/BTSC/KB10721

  Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?

  Check out this post

  http://supportforums.BlackBerry.com/T5/BlackBerry-Pearl-BlackBerry-8100/turning-off-the-camera-Shutt...

  
  

  Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?

  Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD

  Called the menu button

  
  

  Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?

  If you select an icon, click the menu button and choose move. You can rearrange the icons. The icons in the top 5 on the list will be those along the boittom when not looking at the full home screen.

  Speaker?: How can I get speaker? xD

  Can try to hit the key ' $' as a shortcut to activate speaker. During a call, you can click the menu button and choose the speaker phone option in the menu

  Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD

  Not sure about that sorry.

  Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.

  Thanks for looking, and I warned you... they have been the newbie questions! xD

  -Darky Delacroix

• Newbie question - javascript - php HTML5 and HTTPS w

  Hi all

  Newbie question...

  I'm having a problem with browsers, mac and javascript...

  simple story:

  1. If I put the test on site NO SSL folder - everything works ok

  2 but if I put the same test on HTTPS site folder - MAC SAFARI gets / data displays ok but firefox MAC and Chrome don't receive data

  Q: why not? How do I fix this so work all browsers?

  ---

  CONFIGURE LIKE THIS...

  Page1.html

  Gets the data with this line...

  What was...

  $.get ('getdata.php', function (data, status) {})

  ... etc.

  also tried this (absolute ref)...

  $.get ('https://mysite.com/getdata.php', function (data, status) {})

  ... etc.

  and displays the data on the same page page1.html

  Safari for MAC = works but firefox and chrome do not display data HTTPS site but all work 3 over HTTPS no alternate test site. (using only this local demand = $.get ('getdata.php', function (data, status) {}))

  BTW: if I manually go to getdata.php he gets php data and display the data in json package very well

  Q: How can I test / solve this problem, so all 3 browsers work on HTTPS site?

  Curious to know why MAC SAFARI OS 10.10.4 was an error?

  There are differences in the way different browsers support SSL.

• Newbie question: to access the items in a locked file "kind of."

  Newbie question: a friend (who is not accessible now) has sent a file I. Vector graphics are enclosed in a blue box. I can move the whole box within the artboard and you can add other items, but I can't change the existing components. Unlock, dissociate are gray. How can I get 'in' components?

  Look in the layer panel and see if the layers are locked. You can also check in tracks mode and see if there is really something out there, or if it has been saved as an image.

• [Newbie question] How to find unused media?

  Hello everyone, quick newbie question. How can I quickly find all media in my imported files that are currently not used in my project? I want to delete them from the project.

  Thank you!

  First, go to the Edit menu > remove unused.

  Use with caution!

  MtD

• Newbie question - how to effectively check if photo is part of the selection

  Hi all

  Sorry for the newbie question, but I do not know how to solve, and I'm sure that there is a quick and easy answer to this:

  My goal is to get all the 'stack heads' (photos with Position 1 in batteries) selection ('photos' below).

  for I have, make photo in ipairs( photos )
  local date = picture:getFormattedMetadata("Filename")

  if Photo:getRawMetadata( "isInStackInFolder" ), then
  - Photo is in a stack
  local photoHeadOfStack = picture:getRawMetadata("topOfStackInFolderContainingPhoto")

  local stackPos = picture:getRawMetadata( "stackPositionInFolder" ), - get the position in the stack
  local photoHeadName = photoHeadOfStack:getFormattedMetadata("Filename")

  app:logVerbose(' Photo nb ^ 1, name ^ 2 is in a stack with the position ^ 3 ', i, date, stackPos"")

  if stackPos == 1 then
  - photo is the master of the battery
  stackTop[#stackTop+1] =photo
  app:logVerbose(' picture ^ 1 is the top of the stack ^ 2 ', date, #stackTop)

  -check if couple if it is correct
  elseif photos. photoHeadOfStack then
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") (Top of the stack already selected", date)

  other
  stackTop[#stackTop+1] =photoHeadOfStack
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") Top of the stack ^ 2 - ^ 3 ", date, #stackTop, photoHeadName)

  end
  end
  end

  
  

  In the if structure in the center of the Position in the stack control, if the Position is not 1, I would check if the photo to the stack ("photoHeadOfStack'") is part of the 'pictures '. I tried 'elseif photos.photoHeadOfStack then' and ' elseif photos [photoHeadOfStack] then ' but it doesn't work-> This elseif is never true even if 'photoHeadOfStack' part of the 'photos'.

  Any way to have this check done without checking the photos "manually"? (via e.g. a loop for)

  I'm sure that Lua offers this, but I do not know how...

  
  

  Thank you for your support!

      --[[ This code creates "stackTops", an array of LrPhotos that are the
      tops of all the stacks containing photos in the array
      "photos". ]]
  stackTopSet = {}
  for _, photo in ipairs (photos) do
      local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
      if stackTop ~= nil then stackTopSet [stackTop] = true end
      end
  stackTops = {}
  for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end
  

• Some Muse about the Newbie Questions

  Hello

  I am just Muse watching for the first time and begins to assess - I'm not a professional Web Designer. I watched a lot of tutorials, but have a few simple questions.

  1. how much hosting with Adobe cost? I think a simple references site 5 page; Home, about, contact, etc.

  2. in the tutorials that I saw that I see that you choose the platform you are designing. desktop, mobile or tablet computer. I don't understand this at all. In the past, when I've used Wordpress, if I use a sensitive topic so I'm fine for all platforms. So, I have these questions.

  b in the Muse, what happens if I design for the office and the site gets read on a mobile?

  (b) once, I designed for desktop, which is involved in the re-design for mobile and then compressed? The amount of extra work?

  (c) assuming that I did all three models types, what gets uploaded to the ftp hosting site? As I said, I do not understand.

  Sorry if these questions are desperately Basic.

  Thank you

  James

  In response to questions:

  (1) with subscription of creative cloud that you get your first 5 free sites to welcome, after which it would depend on the site plan, you select and pay for.

  More info on this:

  http://helpx.Adobe.com/business-catalyst/partner/upgrade-temporary-site.html

  http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-design/using-your-Adobe-Muse - site-hosting-rights/ger /.

  Plans for the site:

  http://helpx.Adobe.com/business-catalyst/KB/detailed-plan-breakdown.html

  Web hosting business | Free trial of Adobe Web Hosting

  (2) has) phone makes the layout of office, because there is no phone available, to make it work like device detects and if there are available phone he could pull up, but if there are no put phone in page or the version of the site then upgrade default page which is desktop appears.

  (b) you can copy the filling, page and plan attributes (structure) of site for the rest of the content that you create separately to different renditions.

  (c) Uploading FTP site will download all the files and folders, means phone, desktop and tablet, all three versions will be exported.

  More information:

  https://helpx.Adobe.com/Muse/how-to/muse-mobile-site.html

  http://helpx.Adobe.com/Muse/using/creating-website-mobile-devices.html

  Please let me know if you have any additional questions.

  Thank you

  Sanjit

• Newbie question: how to extend in unallocated disk in a VM XP?

  Hi all:

  This is a newbie question, but looking for answers only left confused me...

  I have VM Fusion (v2.0.6) running on a MAC (OS X - Snow Leopard) with an XP VM. When the XP VM has been implemented, it has been implemented with 20 GB hard drive space. I used VM Ware Virtual Machine settings to increase the disk space of 50 GB. (I left the "pre-allocate disk space' and 'divide into 2 GB files' options unchecked.) I don't have any snapshots during execution/implementation.

  However, my current XP VM flashing me alerts "low disk space" - I see only about 1 GB of free 20 GB (I don't see the 40 GB listed in 'My Computer'). When I use the Services of management of disk in XP, I see a disk 0 20 GB System Partition with 30 GB of unallocated space.

  How can I extend the current Parition (System) in the space of 30 additional GB? And do I have I done this to begin with?

  Thanks in advance!

  Take a look at: resizing of the ramdisks with step by step Instructions

• [Newbie question] How is-13:00 or by e-mail a link of Dell on the Community Council?

  [Newbie question] How is-13:00 or by e-mail a link of Dell on the Community Council?

  Once I click on a name of Dell link to access their profile. Currently, I don't see a where clause to send a private email Message. What Miss me? Thank you.

  A screenshot of the view that I see when I click on the link Dell profile is attached.

  

  My apologies, unlike most of us, DELL-Lorna M does not accept private messages. You will have to send him directly.