Similar Questions

• I bought the PDF monthly Pack and I can't open my files on my software of the company. I click on a document and a screen comes up asking me to buy something. I already have. Also before you buy the PDF package I got was able to open my documents of the c

  I bought the PDF monthly Pack and I can't open my files on my software of the company. I click on a document and a screen comes up asking me to buy something. I already have. Also before you buy the PDF package, I was able to open my documents of the company. WTF thank you

  Have you by any chance also tried Acrobat Pro, have a trial version for 30 days, and it is now out of print? If so, you must uninstall it.

• Powerline questions before you buy

  Hello

  I plan to go to current line to increase the home network speeds (from 802. 11 g) and have a few questions before I do.

  My planned network config will be the following.

  4 PLE in total - 2 connect to Linksys WLAN routers (currently bridged) and 2 directly to the Macs.

  I intend to replace the WLAN bridge by current line and still use WLAN to access wireless to different floors.

  (1) it will work?

  (2) for example PLE300 configurable for external routers which have several machines connected to them via LAN & WLAN?

  (3) I read machines Windows are required for the initial Setup. They are needed at both ends at the same time or is a machine for the network enough?

  (4) anything else I should be aware with this set - up?

  Appreciate your support.

  See you soon,.

  Saami

  Depending on the configuration, you mentioned that it should work.

• Is it necessary to have windows 7 is installed before you buy the upgrade of Windows 8

  Hello
  Is it necessary to have windows 7 installed before you buy windows 8. Or only the product key is sufficient.

  Lets assume that it is necessary to have windows 7 installed. Then, suppose if I want to reinstall windows 8, I have to follow the procedure:

  1. install windows 7
  2. run the upgrade of windows 8

  Or we can directly run windows 8 upgrade.

  Please help in solving my doubt.

  Andre said it is "recommended", it is always best to clean install original DVDs.

  Maybe you can google that question, you can get answers, we cannot give you here.

• Questions before you buy Windows 7 Ultimate

  I am deciding on the purchase of Windows 7 Ultimate 64 bit on Microsoft.com.  But I have questions before purchasing the product.

  1. I want to download the full version of Microsoft Windows 7 Ultimate, and I want to know is this Windows 7 with or without SP1?  If SP1 is included, so where to buy Windows 7 without SP1?
  2. Is this the version OEM or retail?

  Question 1. Windows 7 Ultimate purchased from the Microsoft Store includes Service Pack 1.

  If you need Windows 7 Ultimate without SP1, you can download it from the following link:

  32-bit Windows 7 Ultimate x 86 ISO

  Amazon.com: http://174.129.85.117/data/Windows7Ultimate32bit.iso

  64-bit Windows 7 Ultimate x 64 ISO

  Amazon.com: http://174.129.85.117/data/Windows7Ultimate64bit.iso

  Question 2: Her or the product key determines whether it is a retail or an OEM license. So if you use a retail key, then it will be in the detail.

• iPad Pro - questions before you buy

  I buy the iPad Pro 12.9 ".

  I have an old computer Intel iMac with Leopard (I know - obsolete).

  My questions:

  -Can I connect the iPad to my computer and access to the files of my iMac to download on the internet on my iPad?

  -Can I connect a Kensiington trackball to the iPad?

  -Can I connect my printer to the iPad?

  Answers would be appreciated.

  Thank you!

  Nina

  Number on the trackball

  The printer is a '' maybe. '' If your printer airprint enabled it will work natively. If it's just a wireless printer, you may need a soft of the manufacturer of the printer, or a third party printer app. If she is not a wifi printer, then no, it won't work because there is no support for wired printing

• Help before you buy the new r4

  Hi all
  I would buy the new Alienware 17 and I want to know if the bios is locking to avoid installing windows 7 or Ubuntu? I intend to remove the Win10 and install Win 7, Win10, Ubuntu, and maybe a hackintouch. I did some research and some say it's the Secure Boot that who manages, but I have never has a laptop I don't know if it's true.
  It's my first Alienware.

  www.Dell.com/.../Alienware-17-Laptop

  Hello.  I don't think that the BIOS itself is locked to any BONE, at least in a way that you can't turn off.  The biggest problem you'll have is to find drivers that work.  Intel went to bed with Microsoft of processors and chipsets before will not fully support or support at all, nothing below windows 10.  If you can find the drivers for the components inside the computer that works with Windows 7, then you shouldn't have any problem installing windows 7.

• RIP a CD again before you buy the game?

  I'm considering the purchase of match.  I have about 50 CDs that I have not yet ripped off in my library.  I have to pull them out until I have buy the game or after?

  Hello

  I is not serious if they are in your library, now or later.

  Jim

• Questions before you buy a T61

  
  

  Lenovo does not offer the IBM logo more, but you can get from third parties and put on yourself. 6-cell and 7 batteries is only available for normal T61 15.4 inches.

  You can call your courier company, it will be necessary. They can make three deliveries before they send it to Lenovo I think.

  About contacts, I don't think Mark_Lenovo can help.

• Have a question before you buy

  Downloaded the demo with intent to purchase but you should know one thing first. Support cat has no Armi my question so I came here.

  In all of the other photo and graphic software, I have used over the years I could open several files, images, graphics and textures in the main window with my graphic of the project. In the demo of the PS when I open another point, it opens in another window and not in the main window of work - so is it possible in PS?

  There are several ways to do so. Two of them are:

  1 make a selection of the area you want to copy using the selection tools > go to the Edit menu > copy > go to another document > Edit menu > paste

  2. right click on the layer of the source document and choose Duplicate layer > choose the destination document like the one where you want to paste, and it would be copied in this document.

• where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  chassis: NI SMU-1078

  ini file to import into MAX

  See attachment

  THX

  Hi again Koen,

  Unfortunately, you can't simulate a complete PXI system, so we do not have the ability to simulate a PXI controller unit. The simulation, you can do is to set up the cards you want to use in you.

  concerning
  Lars

• How will I know that the Windows Xp pro product key is already registered or not before you buy

  In fact, I'm going to buy Windows XP Professional and I see the product key is spent outside of the RAP and it is visible to everyone so here is the possibility that someone already uses this key and register online. I just want to know that how I know that the key is not yet register online before you buy.

  Hello

  
  Where will you buy Windows XP computer?
  
  You can contact Microsoft customer service to improve the assistance.
  http://support.Microsoft.com/kb/295539
  
  Hope this information helps.

• Before you buy Adobe software from a private party, is there a way I can check that the serial number is valid?

  Before you buy Adobe software from a private party, is there a way I can check that the serial number is valid?

  N °

  Another that calling Adobe Customer Service.

  Unfortunately, that's the risk you run with the purchase of used software 3 third-party. Not sure if it is hacked.

• How to clear the output buffer, possibly resize and burn again, before you begin the task of output

  I use PyDAQmx with a USB-6363, but I think the question is generic to DAQmx.

  I have an output buffer that I want to be able to (re) write to without starting the task output.

  More specifically, I have a graphical interface and a few sliders, the user can move.  Whenever the slider changes, a new set of values is loaded into the buffer output through DAQmxWriteAnalogF64.  After you set the value, the user can click on a button and start the task output.

  In some cases the change in cursor does not require a change in buffer size, only a change in the data.  In this case, I get the compalint following DAQmx as they tried writing:

  The generation is not yet started, and not enough space is available in the buffer.

  Set a larger buffer, or start the generation before writing data more than content in the buffer.
  Property: DAQmx_Write_RelativeTo
  Value: DAQmx_Val_CurrWritePos
  Property: DAQmx_Write_Offset
  Corresponding value: 0
  Property: DAQmx_Buf_Output_BufSize
  Corresponding value: 92

  In other cases the change in cursor requires both change in the size of the buffer and data modification.  In this case, I get the following, but only after that do a few times each time increase the size of the writing.

  DAQmx writing failed because a previous writing DAQmx configured automatically the size of output buffer. The size of the buffer is equal the number of samples written by channel, so no additional data can be written before the original task.

  Start the generation of before the second writing DAQmx or set true in all instances of writing DAQmx Auto Start. To gradually write to the buffer before starting the task, call DAQmx Configure an output buffer before the first writing DAQmx.
  Task name: _unnamedTask<0>

  State code:-200547
  function DAQmxWriteAnalogF64

  I tried to configure the output via DAQmxCfgOutputBuffer buffer (in some cases, by setting it to zero or a samples, then save again, in an attempt to clear it) but that doesn't seem to do the trick.

  Of course, I can work around the problem by loading data only when the user clicks the end button, but not what I'm asking here.

  Is it possible to "remake" the writing of output before you begin the task?

  Thank you

  Michael

  Today I have no material practical to validate, but try unreserving task before writing the new buffer:

  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Unreserve);

  With a simulated device, he made the error go away in case the buffer is the same size.  You will need to validate if the data are in fact correct, but I think it should be (unreserving I would say reset the write pointer so the old buffer are replaced with the new data).

  I always get errors when you try to change the size of buffer if (on my 6351 simulated).  I posted some similar mistakes about the reconfiguration of the tasks here, I guess it is possible that this issue has also been set at 9.8 (I always use 9.7.5 on this computer).  If the behavior is still present in the new driver, and also appears on real hardware (not just simulated), then it seems that this is a bug of DAQmx someone at OR should be considered.

  I wrote a simple LabVIEW VI that captures the error in order to help people to NOT reproduce it:

  

  The best solution at the moment would be likely to re-create the task if you need to change the size of the buffer (or avoid writing data until you are sure what will be the size of buffer).

  Best regards

• Before you buy Windows 7 it will modernize my Windows XP?

  Before you buy Windows 7 it will modernize my Windows XP?

  First, see if your computer meets the Windows 7 system requirements:

  o 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  o 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  o 16 GB available space disk (32-bit) or 20 GB (64-bit)
  graphics device o DirectX 9 with WDDM 1.0 or higher driver

  If so, run the Windows 7 Upgrade Advisor to check for possible problems.  If it passes this test, you can buy a Windows 7 upgrade version and use it to perform a custom (clean) installation.   For more information, see upgrade from Windows XP to Windows 7 and Windows 7 Upgrade Considerations .