A few Questions on the Qosmio G35-AV650 series

I have some questions that I would ask to my Qosmio G35-AV650.

1: I've updated the BIOS to v1.4 (2005), to v3.3 (2007), to install Vista.
Vista does not work so I removed it - I guess that I need to update the drivers again.
In any case, I got my PC to normal - delete the partition allocated to Vista and reset the boot record.
However, there was something that happened to my pc. The model has been replaced by "Laptop".

My DVD DO NOT work for recovery. It says 'BAD COMPUTER'. IM wondering how it could have happened.
If anyone could shed some light on what might have changed the name of the template, do so.
The only thing I can think is the update of the BIOS. Any ideas?

2: my HARD drive crashed at 1 point of time before. In order to
avoid any loss of data, I have intertwined around hard drives and reinstalled XP on the secondary HARD drive.
However, this is somewhat troblesome. First of all, the Qosmio player no longer, because it is
the disk of HARD original 1. Secondly, if I did a reinstall on 1 HARD drive, it would remove the Qosmio Player?

Third, if I put the hard drives back to the initial placement and boot from HDD 2, HDD 1 IS NOT recognized by the PC.

It seems I have TO boot from HDD 1 for 2 HDD is picked up by windows.
Is there a way to test PC to start from 1 HARD disk then boot from the disk HARD 2, eventually recognize two hard disks?
Or is there a way to manually "load" both hard drives?

3: what would you recommend to do if Windows won't recognize the Bluetooth device. I know that his work.
I installed a Virtual Machine and installed the bluetooth in it. It is during the driver installation process
that the installation crashes with devices NOT picked up by the operating system. Any ideas? I can't use the recovery DVD trying to install
the original drivers [see #1].

How can 4: if I'm using the standard Windows Xp CD, I load the Toshiba RAID drivers? The only thing I see
includes a floppy drive, which does not have the kaptop.

I know this is a long post :)
Thank you for your responses and reaing.

Man, these are some deep questions. Your laptop looks new, under warranty? If so, go back to Toshiba and make them understand the 'thing'. These things are problematic I know... it is a little hidden from any sale side isn't it.

If you want to put in Vista, just follow all the instructions in the Forum of Francisco - you can tell that's the one with the most comments. If you follow the messages from scratch, you will be able to get your business laptop.

Francisco is our leader of the sect. He's awesome. He saved us where Toshiba does not have. Welcome to the fraternity.

Brother of Tay.

Tags: Toshiba

Similar Questions

  • A few questions about the Qosmio G50

    Hello

    I am interested in buying a Qosmio G50 (115 or the H10) to the United Kingdom, but I want to make sure I can be updated at a later date.

    * Especially: *.

    # The motherboard supports the new Intel Quad Core QX9300 mobile processor? I would like to put this in my machine when the price comes down in a year or two.
    # This machine does support DDR3 1066 mhz RAM as the X 300?
    # Can we buy this machine with SSD instead of hard drives?

    Also:

    # I know the material support it 8 GB of ram, but Toshiba provides all of the necessary drivers for a 64 bit (Vista home premium) or Ultimate OS, what versions of Windows Server?
    # Can I buy this preloaded with Vista Ultimate product? None of the sites for sale in the United Kingdom seems to show Vista Ultimate, even if they all pictures saying "Toshiba recommends Vista Ultimate".
    # Has anyone tried to load the ESXi HyperVisor from VMWare to run multiple operating systems on the computer at a time? I am a developer who travel a lot and I would like to be able to run several servers / workstations on the material using ESXi.
    # Finally, I heard the rumor of a X 300 with a 18.4 "monitor in the works, it's just a rumor or we are giong see a X 300 with an 18.4 screen" next year?

    Kind regards

    F

    OK, after several hours of searching it seems that I can reduce the majority of my questions in one:

    Is the G50 - 10 H or G50 - 115 the montevina-based happen or not?

    Thanks for anyone who can help me with this.

    F

  • A few questions about the Qosmio F20 upgrade

    First of all, my English is not very good!

    I want to improve my laptop. I want a new graphics card and a new processor.
    My questions are what standard mxm has my cell phone (I have a GO6600)? Where can I buy a new one?
    The cpu can be improved? If so what CPU? Can be installed on a dual core?

    -Does anyone know how the open a Qosmio f20.
    I opened all the screws on the site but I can not open it... What should I do I open Notepad?

    My laptop dvd drive is very strong when I play games... it works all the time and I have made many drowning.
    Do you know how to reduce noise?

    thx for the answers

    Hardware upgrade on laptops is not comparable with the workstations where you can upgrade almost everything. Mainly on laptops, you can improve RAM, WLAN, HARD drive or maybe BT but all that s.

    Update graphics card is definitely not possible because the graphics card is part of the motherboard. Update CPU's might be possible, but certainly not recommendable. The construction of any material is designed by technicians and configured to provide optimal use. If optimal use, you understand very good performance but without the possibility to destroy the material. The common problem on mobile computing is heat and how to cool the hardware components.

    The best graphics card and CPU using the material temperature is much higher and the result can be permanent running fan or just property damage. If you think about all this stuff, I hope you understand that this type of upgrade can be very risky.

    If you need to better and more powerful portable computer the best option is to sell your old and buy newer with the best hardware configuration.

  • Update BIOS question on the Qosmio F50/F55 series

    I have advanced and updated the bios of the 1.30 the 2.20 and everything went well.
    I did not like the new bios for the portable was little more warm, so I went to downgrade to the 1.30.
    I have two toshiba Web site and has made the winphlash64.

    Thing is that it won't let you not downgrade, then I open the phlash.ini and changed the "UpdateMode = 3-UpdateMode = 0" and he replace the parameters to downgrade. He did the downgrade successfully as "starting from 1 to 35 block". When it restarted I get a black screen only dead pc, no MESSAGE. I did the recovery from the crisis and did not work on a USB "bios qosmio are greater than 2MB and can fit on a floppy."

    Maybe someone here knows perhaps changing the "UpdateMode = 3-UpdateMode = 0" I have to manually reset the cmos?
    I don't have a warranty, and I know that the laptop is fine, and the bios chip is soldered in 32 pins are difficult to desolder.

    Thank you very much!!

    > Thing, is that it won't let you not downgrade, then I open the phlash.ini and changed the "UpdateMode = 3-UpdateMode = 0" and he replace the parameters to downgrade. He did the downgrade successfully as "starting from 1 to 35 block". When it restarted I get a black screen only dead pc, no MESSAGE. I did the recovery from the crisis and did not work on a USB "bios qosmio are greater than 2MB and can fit on a floppy."

    As far as I know that you need a traditional version of the BIOS update in order to downgrade the BIOS

    However, the fact is that your laptop does not start, which means that the module ROM was not properly flashed and it needs to be flashed again with a disc of crisis.

    ASP request for help!

  • Qosmio G35-AV650 - using the recovery CD, I get a message - MACHINE BAD!

    Hey there,

    After that I got my Qosmio G35-AV650 fixed by Toshiba, since, then using the recovery DVD that comes my machine is evil!
    I figured out that they changed the name in the BIOS for PC Portble, up to now, I have not found the tool (DMI) to get the fixed string...

    Could someone be so kind to let me this software?

    Thank you in advance...

    Hello

    It really seems like the laptop technician forgot to update the right information in the DMI!

    I searched on the Toshiba site for useful info because this laptop seems to be designed for the American market only.
    I think I found a useful site;

    Check this box:
    [How to eliminate the error message "Machine hurt" during the restoration of the image of the software factory: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1010 7032xml & sliceId = & dialogid = 26604851 & stateId = 1% 200 %2 026606094]

    But note; You should check whether the Uutility is compatible with your laptop. If this isn't the case, then contact the ASP in your country for an update!

    Good bye

  • Qosmio G35-AV650 does not start after format

    Okay, so I downgraded/upgraded my computer back to XP from 7 a month ago.
    Yesterday, I went to the library for all my updates and whatnot that I neglected since the upgrade. When I turned on the computer in the library, it would not be loaded the office correctly and an error box open stating that it was impossible to recover the THotkey. It turns out that my feature key drivers took a dive. I've done everything I can to solve the problem. Nothing worked, I decided to reformat.

    Early upward the dinosaur this afternoon when the format is finally finished, it would not fully boot screen where you are asked which language you want to use, what time format, all of these bases. I tried to reboot several times, finally tried safe mode, even to reformat again, nothing works.

    Now, seeing as I was only reformat to XP in order to enter my card default sound drivers to see if they would work on 7 (the company that made my card was bought shortly before 7 was released and that they still need to make new drivers), I decided to say screw that it and any format the computer back to 7. When it loads everything from disk (disk? drive?), it goes to the screen asking what disk I want to install, it says that I have no disks on which I can install it.

    I came across this problem before, the first time that I put 7 on the computer. Since I have two hard drives, it needs the RAID drivers that connect the two. I downloaded several different, all for Toshiba Qosmio G35-AV650 RAID drivers, but it detects all the drivers. The way I do it is to put on a flash drive and tell the computer to get them from there. I do everything the same way I did before, but nothing works at all. I tried to go into the BIOS settings, but I have no idea what I could do.

    I'm tearing my hair out trying to figure out what I can do here, but I'm completely lost. Any ideas?

    You use a generic Windows 7 disk? Or a Toshiba Win7 upgrade disk?

    Basically, you need the drivers SATA F6 (INFs) on a USB Flash drive during the installation of Win7. The version of Vista should work fine in Win7.

    You can change the RAID settings in the BIOS to "JBOD". First, make sure you back up important data.

  • Need recovery disk or drivers for my Qosmio G35-av650

    I have a problem: I bought my laptop Toshiba Qosmio G35-av650 United States. I'm now in RUSSIA. Yesterday my windows are down and I have lost my disk to start the system with the software, could someone tell me what I'm doing, where I could buy the startup disk or download?

    Thank you

    Hello

    I guess the original recovery media can be ordered in US only. In any case, you can install your own operating system. All the drivers, tools and public services should be available on the support page American - http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

    Check it out!

  • Error message 'bad machine' on Qosmio G35-AV650

    Hello
    Please help me with the message 'bad machine' in my book... How can I update DMI?
    Thank you!

    Hello

    Please visit Qosmio G35-AV650 homepage and check the downloads and support bulletins. If you cannot find anything that can help, contact the nearest authorized service partner. They can do for you.

  • A few questions about the Satellite A100 PSAANE

    Hi friends,

    I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
    Now, I have a few questions... I mention below: -.

    (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

    (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

    (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

    (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

    Please help me friends. Thanks in advance.

    Kind regards
    Perkins

    Hello

    Here, a few questions about the number:

    (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

    (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

    (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

    (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

    Welcome them

  • A few questions about the use of data and Cliq

    I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

    1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

    2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

    I hope that makes sense, thanks!

    To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

  • Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

    I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

    (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
    (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
    (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
    (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
    Thank you very much!

    I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

    (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
     
    Yes, the registration period is between June 2, 2012 to January 31, 2013.
    (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
     
    Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.
    (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
     
    Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.
     
     

    These steps will take you through refreshing your PC:

    · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

    · Click settings

    · Click change PC settings

    · Click general in the left column

    · Under refresh your PC without affecting your files, click Start

    Then follow the instructions that will be provided on-screen to cool your PC.

    (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
     
    As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
    Thank you very much!
  • I have a few questions on the Adobe CC Bill.

    I have a few questions on the Adobe CC Bill.


    Now I use the new package 240 Baht/month, but on my Bill have a times.300 list 2 and 240 baht (detail in attachment)

    Clouds please check and comment me.

    Thank you for your kind support


    Peerawat S.

    20151225_114523_resized.jpg

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

    -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Hello, I have a few questions about the affiliation of creative cloud

    Hallo,

    I have a few questions about the affiliation of creative cloud:

    1. There is an Adobe offer up to 27.11. : the price offered is 47.59 euros per month including MWSt (VAT) or €568,20 / year.

    For what is this offer period/how many years valid?

    2. after the period of the offer, the membership will cost the standard-price: €59,49 / month or €713,86 / year (seen on the Adobe Web site).

    For how many years this standard - the price is fixed?

    Is the standard-prices include MWSt. (VAT) too?

    Thank you

    Thomas

    Hello

    I advise you to contact Adobe sales for queries on pricing.

    Contact us | Adobe

    Kind regards

    Sheena

  • A few questions of the benchmarking Guide.

    Hi people,

    I now use ESX 5.1

    I have a few questions about the VMmark test!

    1.

    Disk space for VM is important?

    Because I found the client model.

    Space is limited, after that I installed the cygwin

    I use Windows 2008, the default 32 GB is not enough

    Same thing happened the day before VM

    The default space is not enough after Windows Update

    2.

    When we asked him to specify the size of the virtual disk and provisioning policy, enter either 15 GB (for you will be

    using Windows Server 2003) or 32 GB (because you are using Windows Server 2008), let the floppy

    Uncontrolled Provisioningoptions

    For this configuration to disk, I have to choose one of the three methods, I can't uncheckd

    Only that I should check?

    Disk provisioning.png

    Is there any document with pictures of installation to follow?

    Thank you very much...

    Alvin

    The script automatically uncomment all lines, as for example the kern.srv.cleanup_threads, cygserver.conf values 2.

    In the files that you have shown, the values were already décommentés so there is no change. Your cygserver.conf is correct.

  • a few questions about the migration of content/web content

    Hi all


    I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.

    -> When we make the site replication will be migrated content (data files).

    -> when we move will contained all the ED and RD etc (any object type web site migrated).

    --> are the two the necessary step for migration when we migrate web site.


    Thank you

    -Yves

    --> When we make the site replication of the content will be migrated (data files).

    It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

    --> When migrate us content will be all ED and RD etc (any object type web site migrated).

    Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

    --> are the two the necessary step for migration when we migrate web site.

    Depends on how you do it, but yes, all bits are needed.

Maybe you are looking for