A file has been restored using previous versions on the property tab.

Similar Questions

• ORA-01152: 1 no file has been restored from a sufficiently old backup

  Hi all
  
  I have restored my database,
  
  and after it's over, I've tried.
  
  RMAN > alter database open resetlogs;
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 2010-05-26 14:53:08
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF'
  
  
  is there a solution to the situation?
  
  Thank you
  
  Ugur

  Here is the explanation:

  ORA-01152: file string has not been restored from a sufficiently old backup

  Cause: An incomplete recovery session was launched, but an insufficient number of logs have been applied to standardize the data base. This file is always in the future than the last applied log. The most likely cause of this error is forgetting to restore the file from a backup before proceeding with an incomplete recovery.

  Action: Apply more marbles until data is coherent or restore the database from a previous backup and recovery of repeat file.

  Also, check out the following link:
  http://oraware.blogspot.com/2008/05/ora-01152-file-1-was-not-restored-from.html

  Published by: Kamran Agayev, a., 26 May 2010 17:02

• 2 months Time Machine backup file has been changed recently and is not the old version of the file

  Good, then me Riddle this dear sweet people. I want to get an older copy of a file that was accidentally changed in recent days, according to me. I went to time machine and found that the file has been changed recently even if the backup of the States, she was saved 2 months ago. YGBFKM

  The reason for which the whole I support is to avoid this specific scenario. What is the backup if it is not the data from the date it was supposed to be archival?

  I would like to understand what has happened even as I and version current source of REAL backup software and ACTUALLY back up my data.

  Michael

  10.11.5 OS

  (21.5 inches, end of 2012)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 640M 512 MB

  * bump *.

• Retrieve snapshots after broken vmx file has been restored

  I'm running a Win7x64 Machine (host and guest) with Workstation 7 and I came across a problem after a failed to stop... after that my host system restarted I could not start my guest operating system that the vmx file was broken.

  I created a new machine virtual and added the original virtual disk (vmdk) and could restart the virtual machine. It was only after restarting when I realized that I've revertet to the initial state of the virtual machine and all the changes that I stored in snapshots disappeared.

  So I tried to do the same steps again and instead of using the original vmdk, I tried to use the one of the last snapshot. But this was not possible (the virtual disk parent has been changed since the child was created)

  Can I do to solve this problem? the parent disk was not changed at all, but I guess that the initialization of the system created new logs etc...

  Please download the attached zip file
  extract and replace "Windows 7 x 64 Edition_workstation.bin"

  then run the cmd

  DSFI.exe "Windows 7 x 64 Edition_workstation.vmdk" 512 1024 "Windows 7 x 64 Edition_workstation.bin.

  Please note the small change in cmd!

  When you're assigning the file "Windows 7 x 64 Edition_workstation - 000004.vmdk" to your VM or simply use the vmx file attached

• If I install pse 8, I'll be able to use previous versions on the same computer?

  I have PSE 4 x (86) installed on windows 7 64-bit programs. I have PSE 8 comes with a CanoScan scanner. I understand that I can't have both open at the same time on the same computer. However, if I close 4 PES, I'll be able to open PSE 8 on the same computer, and then use both with full function?

  While surfing, I fount this quote from a person who reviewed the PSE 8;

  http://www.Amazon.com/review/R3RXGF78TR8WHD/ref=cm_srch_res_rtr_alt_5

  "To install, the PSE 8 recognized PSE 6 was already installed. It does not force an uninstall of version 6, but eventually invites you to select the version to use. I chose 8 PES, and completed without incident the PES 6 uninstall later. The installation routine will advise you that you can uninstall the version at any time, but you will need to select which version to run. »

  So, does this mean that once I chose the option of the EP version 8 when installing, I won't be able to use 4 PSE? Again, I intend to have only a PES open at the same time and close a version before I opened the other version.

  I really love PES 4 and ideally, I want to be able to use the PES 4 and 8 of the PSE on the same computer. Either 4 PSE opens by itself; PSE 8 or by itself.

  I hope that I was clear and appreciate any advice at all. Thank you

  ausetcat2 wrote:

  However, if I close 4 PES, I'll be able to open PSE 8 on the same computer, and then use both with full function?

  Yes.  Each version is standalone, standalone application.

  Ken

• How to use previous Versions to be like an instant Virtual Machine?

  I want to use previous Versions to be like snapshots of a virtual machine.

  I have a class of machines Windows 7 I want to freeze their condition so that they will restore a snapshot whenever I created whenever they have restarted.

  Right now I use Comodo Time Machine to make this work but I prefer to use "Previous Versions" or the system restore to make a machine to return to a State that I created any changes have been made.

  Can anyone help?

  Hi Pete,.

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Good night bought a pack and your lightroom photoshop lightroom price 12,90 EUR has been scaricoto, photoshop, because I just downloaded the trial version? I thought it was all inclusive! like the previous version. The version I had before that I do n

  Good night bought a pack and your lightroom photoshop lightroom price 12,90 EUR has been scaricoto, photoshop, because I just downloaded the trial version? I thought it was all inclusive! like the previous version. The version I had before that I do not know why it stopped working... you know the answer? Thank you

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• My version of 11 items seems to have corrupted so I deleted and tried to download another copy. The operation has failed with a message "Adobe reader could not open... because it is not a supported type, file or because the file has been damaged."

  My version of 11 items seems to have corrupted so I deleted and tried to download another copy. The operation failed with the message "type of Adobe reader could not open... because it is not a supported or because file that the file has been damaged. Help please!

  You can also download the demo version of the software directly to that linked page below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• Please can you help. My PC has been repaired under warranty during which the motherboard was changed. I cannot now use CS6 design standard because I assume that he thinks it is on another computer. Previous activation was very good. What should I do now?

  Please can you help. My PC has been repaired under warranty during which the motherboard was changed. I cannot now use CS6 design standard because I assume that he thinks it is on another computer. Previous activation was very good. What should I do now?

  Try contacting Adobe personal chat:

  Contact the customer service

• How to restore all my files has been deleted.

  If Microsoft Security Essentials said that my computer has been infected. I clicked on the cleaning of my computer button, then a minute later all on my computer has been deleted. Please tell me how to recover my business. I need an answer as soon as POSSIBLE...

  Hello

  Your files have probably been infected and therefore has been removed.

  Check if this article helps to recover your lost files.

  Recover lost or deleted files
  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

• How to fix a download that is "a supported file type not or because the file has been damaged"

  I downloaded files from an e-mail to SAVE in the Documents and when I went to OPEN it with ADOBE READER, I received a message that "Adobe Reader cannot open this file because it is not a type of file supported or because the file has been damaged (e.g. He was sent as an attachment to e-mail and has not been correctly decoded.  I'm a novice at this and do not understand really that.  What can I do to fix this so I can play this file? Can you help me?

  Nope... I'm not confused.

  MP4 is a film format and has nothing to do with
  Adobe Reader.

  You need an application that can read a MP4 video file.

  The free VLC Media Player may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.1 - win32.exe)

  When you have installed... VLC right click of your MP4
  file and choose the menu... Play with VLC
  Media Player.

  Information on creating a file association...

  Right-click a file... in this case a MP4... and the
  menu... Choose... Properties / change button... Choose
  the program that you want to use (VLC Media Player) and
  Click on... OK / apply / OK.

  What does that make VLC Media Player default
  program for MP4 files.

  The next time you click left a MP4 file... VLC expected
  start and play the file.

  Let's recap...

  Since the MP4s are downloaded on the net...
  they are not attachments and my previous instructions
  on... File / save attachments... do not apply.

• Sharing multimedia files has been disabled because a windows required setting or a component has changed.

  Earlier today, I was a game on my Xbox 360 and decided I want to play music in the background, using the guide of 360.

  I went to "Select Music", searched my PC in the devices menu, and it does not appear. This has happened before, I just figured out my PC was in place. I went to the 360 Dashboard and looked back to the server. He has not yet shown upward.

  I went to Windows Media Player on the PC that I share the media selected in the dropdown under library and went to share multimedia files. (Here's where it gets confusing...)

  He gave me a message saying "sharing multimedia files has been disabled because a Windows setting required or a component has been changed." I hit very well, and I went back to the sharing of multimedia files. Now, I had the option to check the box "share my media". I checked, hit OK, made sure everything was good to go. The unit has not yet appear on the dashboard. I went back to the sharing of multimedia files. To my surprise, I received always «sharing multimedia files has been disabled...» »

  This is the part of the confusion: if I turn on media sharing, Windows it cuts back.

  I tried all the solutions online that I could find, which includes deleting the files in the Windows Media AppData\Microsoft folder. Register a dll to the administrator. Ensuring that you have the "Windows Media" folder. All take very well.

  Basically I narrowed down it to: nothing works.

  Each person could fix their problem by using the solutions proposed in other posts on other forums/blogs. Mine is recurring. In addition, my media is on a separate internal hard drive, which I added to the Windows Media Player files to add multimedia elements. I went and deleted from here. I still have the problem of sharing.

  All said Microsoft is to restore your computer to a previous state. It's not really useful. I don't want to go just restore. I want to fix it where. In addition: restoration would not help, I don't know how long this problem exists, but I have not known about it.

  
  

  -Very well, after a fresh reformat the hard drive and re-installing Windows, I finally reduced the problem.

  I have not had ANY problems with the computer... Until I installed my Adobe CS5 Master Collection again.

  It turns out that the part of the Adobe Acrobat 9 Pro Extended software called Adobe Presenter 7 causes the sharing to go haywire.

  I deleted Adobe Presenter 7, and just like that, sharing has increased again.

  In addition, Adobe Acrobat 9 was causing my sidebar to go haywire, so I advanced and which takes off as well.

  Have not had a problem since.

• My .mdf database file has been corrupted

  My .mdf database file has been corrupted, and I have no way to get my S.i. schema tried with some software available on the internet, but its turns out that each of them being the demo versions give back the repaired file. Are there other ways by which I can restore my db? I use MS SQL 2008

  Hello

  Sorry for the delay in responding to this post.

  The problem is related to .mdf, which is corrupt and you are using MS SQL 2008, ask you to send the query to the following TechNet Forum to get help.

• Restore a previous version of Camera RAW

  I'm having trouble finding information on how to restore a previous version of Camera RAW. After you have uninstalled PS and Bridge, The Creative Cloud App shows still Camera RAW CC as installed and 'updated '; the uninstall option is grayed out. I don't see Camera RAW in my applications folder so I don't know if it is still on my machine.

  Also, if I install PS/bridge CC 2015 16.0/6.0 will I have the same version of Camera Raw or he will force me to use 9.6.1?

  Changes made to the most recent version removed some features of the save options that I used regularly - size the picture and save the preset. Why in the world were these deleted options! This version also has frequently freezes when you select an additional file naming attribute requires a force which results in losing all the adjustments made nearby.

  Mac OS 10.11.6

  Any help would be appreciated.

  Thank you!

  

  If this screen is what you see, then I think you have somehow restored to an older version of camera raw. If you go to help-> on plug-ins in Photoshop, what version of camera raw is displayed?