A good day! Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

Similar Questions

• Anyone know a fix for the problem of gel (Xoom)

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  
  

  Greeting debuisson,

  Welcome to the Support Forums!

  Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).

  Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.

  Please let me know what you find.

  -Doc

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• can I get 50 GB per month pour.99 but instead of monthly payments make one payment for the year?

  can I get 50 GB per month pour.99 but instead of monthly payments make one payment for the year?

  Only by buying a gift card iTunes Store and leaving enough of his balance to pay for storage.

  (138320)

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• I searched for a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.

• I found the FIX for the problem of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah,

  Thanks for the valuable information and goot to know that you were able to correct and solve the problem.

• FIX for the problems of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah

  Thanks for the detailed post and photo

  

  Ciara

• Fix for the problems of release of WebHelp with IE 11 breaks search

  I use RoboHelp HTML 9 and you had problems with WebHelp generated in IE 11. The table of contents was completely empty and the 'Search' tab was going well, but have not worked. Everything worked fine in Firefox. After much research online and experimenting in these forums and elsewhere, I was able to get the table of contents to display properly in IE 11 (and Firefox), but the fix caused the Search tab to stop functioning in accordance with this other forum post RH9 Webhelp search function does not work properly.

  I need to have BOTH COT and research displays and works correctly but in order to get the table of contents displays correctly I had to change the preferred Format "Pure HTML" and, according to the above-mentioned position setting, it's what messes up the search function. is there a solution that will enable the TOC and research work properly?

  Here is a summary of the steps I took to get to this point:

  • Tested WebHelp output of two different projects myself so that the startup project Salesbuilder - all would display or function properly in Firefox but not in IE (empty TOC and non-functional research) 11.
  • Find a "patch" for RH10 exactly the problem I have experienced with RH9 but wasn't able to find a version for RH9. Since the patch included only 2 files (whutils.js and whver.js), I saved these files in the RoboHTML\WebHelp5Ext\template_stock directory and replace them with the new.
  • Regenerated one of my RoboHelp projects - still does not work in IE 11 and now does not work in Firefox either!
  • Tried to turn on mark of the Web but this did not help and did not allow for opening PDF that is necessary for one of the projects, I turned it again.
  • Change the preferred Format setting "Pure html" instead of "DHTML" and the table of contents displays and worked properly in 11 IE and Firefox! Hooray!
  • Celebrated for 10 seconds until I clicked on the "Search" tab and see the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index, but none of my projects using an index and I've not generated one or the other project.
  • Found the post mentioned above which States that the solution is to change the preferred Format of DHTML, but when I do this I am back empty TOC and look clean but non-functional search!
  • I have now deleted the search the output of one of the projects tab, it is not really necessary, but I need to find a solution for this for my other project.

  Two of my projects are run locally - it is documentation that is distributed on a CD release and the other is CSH, which is loaded on the local server with the software for which it was created.

  Dorothy

  Note to administrators: Sorry, but I posted this in response to a previous post , summary, Index, & Research do not appear in the generated... help -then perhaps it should be removed from this thread to avoid confusion.

  There is an official fix for RoboHelp 9 IE10. But who is unable to solve your problem. If you PM me, I can send you a pre-test to fix IE11 on RH9 to see if it works in your situation.

  The only real solution is probably to update RH11.

  Kind regards

  Willam

• Partial cure for the problem of model Icon Editor

  I'm driven crazy by models Icon Editor behavior (which I love and use all the time).  What happens is I'll open a project, start to make icons with my set of templates (all saved in LabVIEW Data\Icon Templates\VI\BS icons) and especially if I've included copies of screws that have been developed, say, two years ago and copied from another file on the disk, will notice two copies of the model , with the second copy often in... part \VI\3rd.  Now, these are clearly my models, just saved in the "wrong" place.

  Get rid of these models in doubles was very difficult - I just spent half an hour doing it.  You delete all the files in the 3rd part, open the icon editor and see only one copy, then start doing things and Bingo!, the model appears in the model list in the Icon Editor, but also the file reappears in the 3rd party folder.  What should do?

  So I did a search on the Web, found a fool named "Bob Schor", which has asked about it in 2011 (on this Forum, of all places!), got a few suggestions, but does not solve the problem.  So I tried something else.

  I noticed that there is a lot of. BIN files stored in the model icon folders, with file names that appear to reference different versions of LabVIEW (e.g. Templates.15.0f2.bin).  On a lark, I deleted this file, deleted the folder of 3rd party model, LabVIEW has reopened, reopened the icon editor, and (he said, I hope) the problem seems to be solved.  There is no more 3rd-party file appearing in the model list, icons are not really, it can't be, maybe if I killed the evil Dragon.  I'll let it rest for a week and if it still seems to work, will return and mark this as a 'Solution '.  Comments and other ideas welcome.

  Bob Schor

  Is there a step I missed, but just found.  In the icon editor itself, there is a setting to know where (by default) record the models he finds inside a VI already, but are not in the calibre of icon file.  This setting is under Tools, icon editor properties.  In the 'Model' category, you should disable "Save third icon templates" which, like a default value of \Icon Templates\3rd, part.

  I am currently testing (on several machines, all configured slightly differently), these ideas and so far it seems to work.  I had a small panic today when the '3rd party folder' with additional copies of some of my models began to appear that I opened the existing screws, but turning the switch "Record the icon of third-party models" seemed to solve this problem.  I'm almost ready to mark this (and earlier versions) post as a Solution...

  Bob Schor

• Studio EN - is there a work around for the problem of referencing data from a grid with a different connection of DB and # different dimensions?

  Hello

  I'm making reference to a column in a different grid with a different database connection. I did some searching in the forums, and it seems that it is a known problem with EN Studio. The problem is that if 2 different database connections have different number of dimensions, then the reference will throw an error.

  For example, what I try to do, is below:

  In grid2.column [A], I have the following formula:

  Grid1. Column [A]

  The result is an error.

  The ultimate goal is to have a base of variance formula in the grid between grid1 and grid2, who have connections to different database with a different number of dimensions. Is there a solution to this bug? The example of the basic formula is less to:

  Grid1. Column [A] - grid2.column [A]

  Any help is very appreciated!

  Thank you

  Tiffany

  Have you tried to change the database connection in a row instead of create a new grid?

• Use good flash to start developing for the Iphone?

  Do you think it is wise to use adobes tools for mobile applications, considering that they poured the sdk, how do we know that we will be able to use flash to make iphone apps in the future?

  First, the SDK has not been "thrown" Adobe has mentioned that they are moving Flex to open at MAX 2010 governance model, and I think that it is widely regarded as a good thing for the community.

  That being said, your question is not really responsible since the right technology depends on many different factors. We use Flex and AIR, because it's rapid development, the capabilities of the platform, and because we already have the resources and the talent in-house to produce with it.

  If I need to get out every bit of performance I might opt for XCode rather (very probably as a native of the AIR extension).

• For the problem of Datacopy's business rules

  Hi Experts,
  
  I am having some problems trying to get the following business rule to work.
  
  DIFFICULTY ("CUSTOMER_NA", "INDUSTRY_NA", "VENDOR_NA" [Version], [year], @Relative("Area",0), @Relative("VALUE TOTAL",0))
  Fix (@relative("Account2",0), @relative("Account1",0))
  
  datacopy [period]-> 'ACT '->' Department_total' [period]-> "Transcanada"->"Department_NA";
  
  ENDFIX
  ENDFIX
  
  This isn't to copy all the data at all.
  
  However, if I rewrite the equation of what follows, I am able to copy the data.
  
  datacopy [period]-> 'Act' to [period]-> "FCST."
  
  Obviously, I need to copy the data of the total Department department_na... could be related to some of the dynamic calc or parameters of calc 2 pass?
  
  A big thank you and best regards
  
  Andrew

  You cannot copy data from a dynamically calculated data value. You cannot specify a dynamic
  Member Calc or dynamic Calc and store as a target for the calculation of DATACOPY
  command.

  However, you can try at assignment(using =), but it will increase the exponential running time compared to copy data.

• Can you make a menu for the click Search right so that when I text matches and research, I can choose which search engine to use?

  If you text matches you can right click above to pull up a menu runs. One option is "x search engine search for"highlight text"" previously, the selected search engine would be any search engine was selected on bar search, Google or Amazon.com, etc.. Because you can't change this selection until you are looking for, the search engine has the default value. Was a gene before, but now, it's just an obstacle.

  Highly recommend the extension of research framework that will solve your problem

  - https://addons.mozilla.org/en-US/firefox/addon/context-search/?src=search