A jpg still print with white lines spaced, but I replaced the color cart.

Similar Questions

• HP Jet 7: Black screen with white lines on the HP 7 stream

  I bought my HP 7 stream about 2 years ago and I'm now a black screen with white lines whenever I turn on the tablet.

  Can you kindly help.

  If that's what you see immediately when you turn on, the graphics have not to the Board of Directors.

  These tablets were dropped after the first year of release, and it would not be worth the cost if it could be repaired.

  I'm sorry.

• BlackBerry Smartphones new icon on the screen circle - yellow with white lines with a 1 next to it - what is it please?

  Hello.

  News to hear so please bear with me...

  I had my blackberry for about a month and a new icon has appeared (alongside the message icon where normally). It shows a '1' next to a yellow circle with white lines through it... I have the feeling that it's to do with e-mail, but don't know what it is or how to get rid of it... I have no new messages to read...

  your help would be much appreicated.

  Concerning
  Sutton237

  Check your browser or WAP push messages.

  Messages folder > Options > folders, and then search for in your WAP push and push browser files.

  Read and erase the message.

• I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please

  I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please, PS is not the first time I used these cartridges, but this is the first time I had no problem

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• my hp 5550 printer is not printing from a connection direct mac after replacing the drive hard * bleep * cause of

  my hp 5550 printer is not printing from a connection direct mac after replacing the hard drive due to the recent recall

  So, you have reinstalled the HP software after replacing the hard drive?

  What version of Mac OS X are you using?

• print photos in color with white lines on the photo

  When I print photos from my computer, the pictures have white lines running through. The color is good, but the white lines surf photography.

  Hello MaryHickey,

  If this problem is fixed after you have cleaned the print heads I think it's a problem with cartridges or heads.

  To resolve this, you will need to contact HP.

  Best regards

  Matthew_Ha

• Help with white lines around motif tiles in distorted envelope

  I am trying to create a label for a conical shape using a JPG image to a pattern repeated seamless: I create a pattern from a JPG file and apply it to a rectangle the size you want.  Everything looks great at this point, no white lines bordering each tile model.  Can I use envelope tool ' to a string.  Subsequently, white lines show around each tile on screen, as well as any print or export.  How can I stop the white lines appear in my work?

  have you tried to rasterize after that you used to fill the shape of your property?

  If it is as you say, NOT to show the lines until you warp, you should be able to rasterize the entire block you filled with several "mosaics" of the model > then make the chain. I would have thought it was impossible cause there still wrong?

  If the final result is just to make this single 'work' then you always can tile it upward into photoshop and use the new image of 'model' in .ai and then make the chain?

  (essentially identical to rasterize in .ai, but you can at least work around any strangeness that is perhaps causing your current problem.)

• Satellite M30-853 - vertical white lines or black spots on the screen

  Hello

  I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

  The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

  I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

  I'd appreciate any suggestions.

  In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
  Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.

• When you print photos it prints black evey line 1/2 inch on the page

  My Photosmart HP 7510 prints black lines every 1/2 inch on the page when printing pictures what is the solution.  I cleaned the print heads and the print quality and the allignment.  What Miss me?

  Hello

  I would suggest trying a hard reset with the printer.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• printer started printing slow (one line at a time all the settings seem to be right

  My hp1200 worked OK started what seems like printing a single line at a time to stop for long periods between the lines. A test page printed out at a normal speed and seems OK. Queue is set correctly.

  In addition to suggesting Elizabeth23, you can check the link below,

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01940312&JumpID=reg_r1002_usen_c-001_title_r0002

  And if that doesn't work, try it

  Doctor of printing HP and scan.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03287318&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001

• Printing printer Lexmark 2600 problems - it prints half a line after replacing the color cartridge

  It prints half a line, if the top or the bottom of it and the cutting of the other party.  This happens on every third line.

  This started happening when I replaced a color cartridge and ran the alignment page.  Before replacing the cartridge, it prints very well (except that the color cartridge started missing).   When I noticed what was going on, I took both cartridges on and then put them back in and had to print the alignment again page.  Yet the problem persists.
  I checked the Device Manager, and my drivers are up to date.  I also checked all connections.
  Any suggestions are welcome.

  Oh boy.  I don't know what I thought.  It just had to unplugging everything & then reconnect them, turn off & on.  This took care of it - seems so simple now.

  I guess it was my new laptop which has the printer all confused.  Win7, my find of CL.

  Insofar as the Lexmark support, I have not yet that day.  In any case, it comes to X 2690 model I had for centuries, so I guess that support would be of any help.  I mean, the guarantee missed a long time ago.

  Thank you for taking the time to answer.

• I have an unable to print with Epson Workforce 2540 after update of the operating system at El capitan

  I cannot print on my Epson Workforce 2540 via my home wi-fi after updating the operating system to El Capitan (10.11.5).

  The news of printer Epson shows that it is connected to the network. After sending a file to print, I get this error message: stop - "filter" has failed

  The Mac App store shows that my printer software is up-to-date. Can you help me, please?

  did you go to epson web site and watch if they have a driver that support el capitan? If they don't you will have to revert to a version of Mac OS x, they have a driver for or get a new printer

• HP ENVY 7640e: can I connect the printer with a USB cable in addition to the Wi - Fi

  I just bought this printer and succeeded in setting up wireless.  Can I now connect it using a USB cable?  If the answer is 'YES', just make the USB connection, i.e. will be 10 Windows automatically adds the printer, or do I have to re - run the setup software and select the USB option?

  I would like to have the possibility of having the two configurations available for me to pick, i.e. be able to select the wireless printer or USB printers.

  Thank you.

  Hello

  The answer is Yes, you can connect USB and wireless. 10 Windows can install a generic driver for you to print but envy 7640 has many features, so you must install drivers to allow you to print and scan locally using USB and printer software.

  You need to connect to wireless internet to be able to use its full functionality.

  Kind regards.

• Impossible to change the line spacing to fill in the blanks questions

  Is it possible to change spacing of fill in the blank question what anyone less than 2.2?

  I can do bigger, but not smaller.

  Thank you

  Dave

  No, they need space for the drop-down lists. That's the answer I get when you connect to a feature request for this type of question.

  You can always create a customized using TEB FIB question. Of course, those who can not be used in question pools, but can have partial credit if you have several drafts.