Similar Questions

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• Generate the analog waveform based on the data file

  I want to create an analog voltage output that follows I have a data file (excel, csv, text (which is easy)).  The data file creates a waveform with equal time between steps (dT =.0034 sec).  After the output through all the data points, I want it repeat indefinitely.

  What is the best way to create the waveform of a data file?

  To create a type of waveform data, calculate the dt by subtracting two values in column 1 and get the array of Y from column 2. If you save the file as a comma separated or tab text file, you can then use the spreadsheet file read. After obtaining a 2D array, you would use the index table and the subset of table functions.

  Assuming you use a capture card data OR for the output signal, you can pass a type of waveform data to a writing DAQmx and set for the generation of types.

• Open the data file Outlook - access denied

  I have an Outlook data file created and used when I was running Outlook 2003 on Windows XP - Pro. I have a new computer with Windows 7 Home Premium. I'm still on Outlook 2003. When I try to open the data file, I get - file access is denied. You don't have permission to access the file C:\Users\Valued Customer\Outlook_xxx.pstr

  I am logged in as administrator.
  The permissions for all folders in the path and the file itself grant full control.

  I changed the owner to my new login name.

  NG wrong - try: http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook TaurArian [MVP] 2005-2010-implementation to date of Services

• Open or convert the .dat files

  How to open image files that have a file extension ".dat".  I have Windows Vista and most of the photo files are .jpg, .gif

  You may be able to view the .dat file if you rename in .jpg.

  Also... the free software IrfanView can be able to open the file:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView and IrfanView plugins
  http://www.download.HR/download-IrfanView.html
  (scroll down a bit for the download links)
  (Download plugins too)

• easy transfer can be used to reload the data files after formatting hard drive?

  I have been informed by level microsoft 2 I have to reformat my hard drive to fix the problem with windows backup (snapshot won't work).  easy transfer will copy all THE data files, including OUTLOOK 2007 on hard drive and then I can reinstall on reformatted drive.

  Easy transfer copy some things but not all things. He does more that can make a simple copy/paste (such as the settings for example) but, for example, not programs transfer (those who need to be put back in place).  Here is a description of what it does (and does not): http://support.microsoft.com/kb/928635.  It will transfer Outlook 2007 PDF files and other personal data if they are selected - you need to know which files you need and where to select them - but it won't transfer the program (which must be put back in place).  It must be run before you reformat the hard disk to collect data and then you can transfer everything what you have registered once the system is re-installled.  You would do the re-setup prior to the transfer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Delete a program in the "Program Files (x 86)" folder. Now cannot find the program under the folder "Program Data".

  Hello, I recently tried deletion of the infamous gorilla of my computer program. I went into Safe Mode to remove it properly. I removed the program under the "Program Files (x 86)" folder first, until I removed it from the "Program Data" folder. Now the program does not appear in the "Program Data" folder, and price of the gorilla is still installed on my computer. I really, REALLY want this formidable program removed from my computer. Any help would be much appreciated, thanks!

  GorillaPrice is an adware, so these tools should do the trick. You may not need to HitmanPro.
   
  Delete Adware & puppies with these tools. Check the updates first and then analyze with each of them at a time until your machine is clean.
   
  
  AdwCleaner (free)
  http://www.bleepingcomputer.com/download/adwcleaner/
   
   
   
  Malwarebytes (download the free version)
  https://www.Malwarebytes.org/free/
   
  
  When offered, uncheck the box: activate the free trial version of Malwarebytes Anti-Malware bonus.
   
   
  
  Junkware Removal Tool (free)
  http://www.bleepingcomputer.com/download/junkware-removal-tool/
   
   
   
  HitmanPro (30 days free trial)
  http://www.SurfRight.nl/en/hitmanpro
   
   
   
  If necessary, reset your browsers. For IE:
  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings
   
  
  Some reading:
   
  
  On these toolbars and modules - potentially unwanted programs (PUP)
  http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/?p=3187642
   
  
   

• How can I re - attach the data files for the programs?

  Original title:

  reconnection of the files

  BONE had to be reinstalled.  All data is saved but lost programs.  Programs now reinstalled, but how can I re - attach the data files for the programs?

  Hello

  You copy the data on your computer (Documents, Photos, etc.) and file extensions should be automatically associated with programs they have written in.

  Otherwise:

  "Changing programs by default by using Set Program Access and defaults of the computer"

  http://Windows.Microsoft.com/en-us/Windows/set-program-access-computer-defaults#1TC=Windows-7

  "How to change file Associations in Windows 7 and Windows 8.

  http://www.7tutorials.com/how-associate-file-type-or-protocol-program

  See you soon.

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE

  Hello

  Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?

  SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';

  TABLE_NAME, TABLESPACE_NAME

  ------------------------------ ------------------------------

  TEST2 USERS

  TEST USERS

  SALGRADE USERS

  USERS OF BONUS

  USERS OF THE EMP

  USERS OF DEPT

  6 selected lines.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf

  [oracle@localhost orcl] $ sqlplus scott/scott

  SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select count (*) from test2;

  Select count (*) from test2

  *

  ERROR on line 1:

  ORA-01116: error opening the database file 4

  ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'

  ORA-27041: could not open the file

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select count (*) of the test;

  COUNT (*)

  ----------

  5000

  SQL >

  The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.

  Hello

  The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)

  You can see if you have lsof installed

  just try

  lsof | grep datafile_name

  Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.

  See you soon,.

  Rich

• I want to loop through the data from two different tables using for loop where the query should be replaced at runtime, please help me

  I have the data into two table with the structure of similar column, I want to loop through the data in these two tables

  based on some condition and runtime that I want to put the query in loop for example, the example is given, please help me

  create table ab (a number, b varchar2 (20));

  Insert into ab

  Select rownum, rownum. "" sample "

  of the double

  connect by level < = 10

  create table bc (a number, b varchar2 (20));

  Insert into BC.

  Select rownum + 1, rownum + 1 | "" sample "

  of the double

  connect by level < = 10

  declare

  l_statement varchar2 (2000);

  Boolean bool;

  Start

  bool: = true;

  If it is true, then

  l_statement: =' select * ab ';

  on the other

  l_statement: =' select * from bc';

  end if

  I'm in execute immediate l_statement - something like that, but I don't know

  loop

  dbms_output.put_line (i.a);

  end loop;

  end;

  Something like that, but this isn't a peace of the code work.

  Try this and adapt according to your needs:

  declare

  l_statement varchar2 (2000);

  c SYS_REFCURSOR;

  l_a number;

  l_b varchar2 (20);

  Boolean bool;

  Start

  bool: = true;

  If it is true, then

  l_statement: = "select a, b, AB;

  on the other

  l_statement: = "select a, b from bc;

  end if;

  --

  Open c for l_statement;

  --

  loop

  extract the c in l_a, l_b;

  When the output c % notfound;

  dbms_output.put_line (l_a |') -' || l_b);

  end loop;

  close c;

  end;

  /

• RMAN issues - no backup or copy of the data file found

  Oracle 11 g 2

  Linux RHEL 6.5

  I inherited a database backup and restore question since the DBA is OoO.

  Here is the script used for the backup:

  Configure default device the disk type;
  Configure controlfile autobackup on;
  Configure controlfile autobackup peripheral type disc format in ' / u01/app/oracle/bkp/controlfile/%F.ctl';
  Configure retention policy to recovery of 30-day window;
  View all;
  Run {}
  stop immediately;
  bootable media;
  allocate channel dup1 device type disk;
  allocate channel dup2 device type disk;
  SQL "create pfile =" /u01/app/oracle/bkp/pfile/initpfile.ora "of spfile;
  backup format ' / u01/app/oracle/bkp/cold_db/cold_bkp_%U' database;
  output channel dup1;
  output channel dup2;
  ALTER database open;
  }

  When I try the following restore script:

  run
  {
  Start pfile='/u01/app/oracle/bkp/pfile/initpfile.ora' nomount;
  Restore controlfile to ' / u01/app/oracle/bkp/controlfile/c-123131414-20140509-00.ctl';
  change the editing of the database;
  restore the database;
  ALTER database open resetlogs;
  }

  I get error RMAN-06023: no backup or copy of the data file found

  I'm trying to restore a database backup from 5 days ago and I use this backup control file.
  

  I'll close this discussion and continue to involve the Oracle.  Thank you all for your help.

• You cannot change the data file

  Unable to Alter Database Datafile

  Hi all

  Using Alter database datafile ' C:\Oracle\APP\ORADATA\...\USERS01. DBF' SIZE 100M;

  getting this error.

  SQL > Alter database datafile ' C:\Oracle\APP\ORADATA\...\USERS01. DBF' SIZE 100M;
  Error report:
  SQL error: ORA-01237: do not extend datafile 4

  ORA-01110: data file 4: ' C:\Oracle\APP\ORADATA\...\USERS01. DBF'

  ORA-27059: reduce file size

  OSD-04005: SetFilterPointer() failure, unable to read the file

  s/o-error: (OS 112) there is not enough space on the disk.

  01237 00000 - "cannot extend %s datafile.

  * cause: year Operating system error has occurred during resizing.

  * Action: Resolve the cause of the error of operating system and start the command

  I understand that the OS space is full and I guess this isn't specific Oracle error, but certainly an OS level error, someone could suggest me how to deal with the erasure of space, is it possible to erase and reuse the data files? Please suggest.

  Help out me

  Thank you and best regards,
  Cabbage

  You need create more space by deleting unnecessary files or narrowing of the files.

• Is there no matter what it is called line high water mark for the data files?

  Hi all

  I'm a little confused about that. Many links suggest that HWM is for Segments (data index etc.). But at the same time, I see a lot of discussion (on this forum as well) which suggest that the HWM is an attribute of the data file.

  for examplefind a watermark on a data file

  Please specify.

  Thank you

  user8896122 wrote:

  Hi all

  I'm a little confused about that. Many links suggest that HWM is for Segments (data index etc.). But at the same time, I see a lot of discussion (on this forum as well) which suggest that the HWM is an attribute of the data file.

  for examplefind a watermark on a data file

  Please specify.

  Thank you

  When all else fails Read The Fine Manual (see LINK below)

  Glossary

• Problem copying the data file

  Hello

  I'm relatively new to essbase. I'm trying to see if taking the back to the top of the map files, data file and security, can restore us the essbase application.

  I copied the outline of a cube ASO 'A' in another word to say 'B '.

  I'm doing the same thing for the data file. But the problem is that I'm not able to see all the data in 'B' when I got the data. I do not know if what I'm doing is just. Could someone please suggest?

  Thank you

  Bob

  Hello

  Once you copy the contour on different App folder stop and start Essbase and see if you are able to see the dimensions in this app (you must have the otl file and keep the files renamed as database name), open the outline and save.

  Export the data from the first application and import these data files on the second request snack if you want to go with manual steps.

  Am not very sure I have no idea of ASO and it's just my guess.

  Thank you

  Amith