a lot of Group of variables together on block diagram
I was wondering if anyone knew a good way to organize a ton of variables on the block diagram? For example, I have 32 switches in this program and whenever I need to read or write from them that I have to use half of my screen just to install in. I can't think of a way to make it work using bundles or subvis. I have attached a picture of how I do things now, but advice on you guys how it would be greatly appreciated! Thank you
Assuming that you do not use indicators and controls in the space of the façade, you can put a cluster around the controls on the Panel (would be helpful if you included a picture of the FP). That's what I did, but I still need more controls half a dozen in the same group.
Kind regards
Michael Tracy
Synergy microwave
Tags: NI Software
Similar Questions
-
In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.
Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc.. This side effect is much more errors, broken links and misreferences than expected otherwise.
How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?
-
How to assign groups to the Group Session variable in the initializtion box
Hi all
I have a requirement that I use a separate table for the table separately for the information of the user and group information.
so in this same user belongs to multiple groups, so how do I assign these groups to single user
I use external authentication of table...
so everything will be done at the level of the session if, my problem is that I'm not able to assign multiple groups to single user,
How to create the GROUP Session variable in the box initialization
(here I'm horizontal initialization option)
Please help me
Thank you
FrançoiseThanks for the fence wire...
Assign points if you feel that my post is correct and useful for your problem
-
GROUP session variable needs of several supply initialization values
Hello
I have a GROUP session variable that needs to get roles of several tables (example A dept table and table dept B).
The block of initialization of authorization I created allows the GROUP session variable to receive the value through only 1 table SQL while I need values of 2 tables (which means 2 roles, access dept A dashboard and dashboard dept B once the user connects).
How to achieve them.
Thank youSo give me a few points... ;)
-
Using local variables to 'clean up' diagram
I have attached a photo with red circles indicating my use of local variables to 'clean up' a block diagram. If I meet problems this? I leave this task and the unwired error?
-Sarah
I see a few maybe really bad race with your VISA resources conditions. For example, if the task on 3 is empty (default), it is likely that the local read will happen before the local write. What this will turn into is lose you your reference VISA in the register shift. Use threads. Locals clean up very rarely in your diagram.
-
I don't know what I did wrong. I have loaded a bunch of photos on my hard drive from an SD card. I've renamed bridge of lot. Somehow all the images files ARW turned the XMP files and I do not see any of the images. I tried to delete the folder on my hard drive, then reloaded my SD card. Half of the photos are back, but half of them are still just the xmp. And some have simply gone all together. I checked the trash. Isn't there. What can I do? Now, my card is too empty.
Post a screenshot of footage as xmp
Check what size these xmp files are.
Bridge cannot delete files in all, but if the files are name and file extension changed, the files will not be recognized in any application
Solution is to add the same file name extension
~ Assani
-
grouping of devices together in MARCH
HI - here is the question:
Under management of intellectual property, I created a 'group of devices' and added a bunch of routers in the Group (they all get up like IOS devices of declaration).
When I define a query or a rule and fill in the field of the device, the new group is not available. It appears in the drop when I fill in the source IP or destination IP fields.
It would be very useful to be able to query for a group of devices considered - otherwise it's almost painful sometimes. Am I missing something obvious?
Thank you
-randy
Hi Randy. Not missing you anything obvious, what you see is normal CSMARS. You may also have noticed that consolidation of the device is not really do anything else then limit the list of items to select from. IOW if you later add a feature to this group, it is not automatically added to the query/report/rule. It's really what I grouping. My understanding is this feature however is coming.
-
Sending groups of variable records in an e-mail to separate recipients.
I have a table that contains the action lines pointing to e-mail addresses duplicates pending. I would like to send the recipients their respective action items in an e-mail message to each person. Intrusion via CFMail sends the outstanding points to each of the separate emails. I tried using the cfsavecontent tag in the intrusion via CFMail but it contains all the elements of the action to all recipients. I tried to use a loop but it duplicates records. Is someone can you please tell me what the best method is to do what I want to do.
I would be very grateful. Thank youintrusion via CFMAIL have a group attribute that works exactly like the cfoutput group attribute. It could be what you're looking for.
-
Why can I not use the variable system building blocks in a user variable?
Using FrameMaker 11... I would like to make a short variable which includes simply all year-round - not months, no date (e.g., "2016"). It is for a page of bibliographic information in my documents, which would also quickly forget. I want to just make sure that the year on this page is current (and auto update, if necessary, when I build the book).
I just had to re - PDF and re - publish a document for this reason (and our release process is anything but 'speedy').
You can change the definition of one of the... Date system variables so that the year of release. For example, to change the definition of The Date of change (Short) in <$year>.
$year>
-
Passage of a variable in a block no DB a DB block
Im getting the FRM-41003 error when I try to pass a variable from a search screen, I created a results screen which is linked to a DB block. Ive searched this error and nothing seemed to match exactly what Im dealing with. Is it possible to do? Someone has experienced this problem?Comment on the ENTER_QUERY;
And add the Go_BLOCK ('NRHR'); somewhere before execute_query
-
Hello
I am trying to accomplish something as shown in the picture. I know I can't group indicators and commands in a single cluster. But can someone give me a workaround for what I can accomplish this.
Even in my UI they need to place, as a group, and even in the block diagram better if it acts as a cluster... because if I put the controls as the control individual or indicator I'd end up with
(5 button controls + 6 Led indicators + 1 control combo box) * 96 = 1152 icons in my block diagram. How do I overcome this?
Of course, you can!
-
copy a local variable without front double element
whenever I have copy and paste a local variable in the block diagram, LV automatically duplicate the front panel which is really awkward... is there anyway to stop the duplication of the façade? I have look all over the place, but maybe I missed something... .Gee where that parameter could be?
There are two ways to copy objects in LabVIEW. Of course, we're the regular copy and paste. You can also hold down the Ctrl key and click on and drag any element in LabVIEW to create a copy. It is not only faster, but this copy mechanism can be used for local Variables and related nodes of property without too much a copy of the associated control. Check it out!
-
Drag a variable shared within a block diagran
I use LV 8.5 with the DSC module. In a Project Explorer, I define a server OPC IO with a few tags and so I linked this tags to define the shared variables. If I drag and drop them directly on the front panel of a white VI, they work very well. If I drag and drop the shared variables for the block diagram of the same VI I get the following error
1950679020 error has occurred reading shared Variable in Untitled 2
Possible reasons:
LabVIEW: (Hex 0x8BBB0014) read access is denied to the shared variable.
This warning occurred while reading \\My Computer\IO_OPC_Test_Shared\Random (\\192.168.10.140\IO_OPC_Test_Shared\Random)
Shared variables are well deployed in the opposite case, they couldn't work with the fron Panel.
Where I'm wrong?
Thank you very much for the help
Gaetano
Hi, Lucius.
Yes you are right! Thanks for the pointer. I need to migrate at least LV 8.5.1
Good day
Gaetano
-
I defined a TierWinDir variable with a constant value of tst. on group work, I use dev. When the job runs it does not use the value on the working group.
Please notify. Thank you
WarrenHey Warren,
This looks like a pretty good idea and then to treat one-off measures with a different value. So, I just wanted you develop your findings a bit with a group of work variable not based on a global variable.
Variables defined in definitions are known to be global variables (public), while the variables defined within a working group are variable local. Here at the working group level, you try to access TierWinDir.132 which is a global variable, and change its value. So, instead you create a local variable to the level of the Working Group and call the local_variable. Then the local variable can be assigned to the value of TierWinDir.132 (but not directly to the variable itself), and have passed local variable to the children jobs. And for one-offs, variable_locale values can be specified differently at the working group level.
ARO
The Derrick
-
Session system variable ': GROUP '
Dear friends,
I'm having a problem with retrieving a value for the session system reserved variable: GROUP IN OBIEE 11.1.1.5
What I read in other posts, I should be able to use: variable group after where clause, and if there are several groups assigned to a user INSTR should deal with this matter. However I can't get this to work.
I use a variable here is the code
Select "ORGANIZATIONS", s.ORGANIZATION_ID
of s T_VZA_SECURITY
where
INSTR (": GROUP ', trim (s.group_id)") > 0
-INSTR ("MyGroup', trim (s.group_id)") > 0
I also tried to replace ": GROUP ' session variable with ' VALUEOF (NQ_SESSION." GROUP)"
my security table
create the table T_VZA_SECURITY
(GROUP_ID VARCHAR (20),)
ORGANIZATION_ID VARCHAR (20),
OWNING_DEPARTMENT_ID VARCHAR (20),
ASSIGNED_DEPARTMENT_ID VARCHAR (20)
);
Thank youJust to cut your discussio runs: 11g fills the ROLE, not the GROUP variable. Roles of application FMW FTW!
http://obiee101.blogspot.com/2011/07/obiee11g-groups-are-roles-now.html
Maybe you are looking for
-
Satellite L850-1LK - keyboard response is very slow
MY laptop keyboard response is very slow. I'll have to press the character for about 3 seconds before what that what is on my screen, please help.
-
Why filtering by "unused" shows the files that are used in the project?
Above the list of clips, I choose 'unused '. I thought that this would be a practical way to show me the files I can delete the library because they are not used. The thing is, I select this option, I see it shows me files that are certainly in use
-
M376g - how to remove a Tracfone directory name?
-
HPE - 380T: no start, no light, nothing
Last night, I go to turn on my computer. Push the power button and it lights up for a split second and then turns off. No fans, nothing. The Green LED on the back of the box which is usually turned on was released. I guess that means that I have a
-
Input pci Vista device driver and driver controller pci simple communications
Hello I'm looking for drivers for the devices listed above. Please send good links. Data sheet: HP Pavilion desktop computer;Windows Vista Ultimate 2006;Intel Pent. THIRD, 800 MHz;RAM: 640 MB.32 bit op sys.Standard VGA Graphics Adapter (Nvidia, 8-bit