A lot of latency when changing tabs. Help

Similar Questions

• Safari resets the scroll position when changing tab

  Safari resets the scroll position when the tab changes.

  For example, to open two tabs. In one of them, go to

  https://developer.Apple.com/library/Mac/documentation/GraphicsImaging/conceptual/drawingwithquartz2d/dq_overview/dq_over...

  and scroll down to the bottom.

  Arrived at the tab other and then return to the tab where you just scrolled down.

  Surprise, the page has been made scroll up, or almost.

  (In my case: OSX Safari 9.0.3 10.10.5,)

  It's very annoying when reading long pages.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

  Or you can use your Apple ID to register on this site and go the Apple BugReporter. Allegedly, you will get a response if you submit your comments.

  Comments via Apple Developer

• How to call a method to support bean when change the af:panelTabbed tab?

  I use component af:panelTabbed and want to call a method of bean support when change tab. I tried to use itemListener on af:showDetailItem, but it's not working. and use clientListener / serverListener to call the backup method does not work either.

  Hello

  use the earpiece of the disclosure on the detail element

  http://download.Oracle.com/docs/CD/E15523_01/apirefs.1111/e12419/tagdoc/af_showDetail.html

  Frank

• My 6 Lightroom freeze when changing from tab to tab library developing countries

  My 6 Lightroom freeze when changing from tab to tab library developing countries

  Hello

  Please follow the Solution below

  1. Go to edit > preference > Performance > uncheck "processor chart use" If this does not solves the problem then,
  2. With Lightroom closed
  • Access

  C:\Users\YourUserName\AppData\Roaming\Adobe\Lightroom\Preferences    (Where AppData is a system folder / hidden so you may need to enter the name of the folder directly into your browser's address bar or activate hidden folders / system in the Internet Explorer view folder options.)

  • Open the file LightroomPreferences.agprefs
  • Locate the line use = True autobahn (press CTRL + F)
  • Take Autobahn use = False

  
  

  After save the file

  Restart Lightroom

  3. also refer to that link and update GPU if you use AMD map

  Adobe Photoshop Lightroom Help | Problems with graphics cards 6 CC/Lightroom Lightroom and AMD | Win

  Let us know if this helps

  Concerning

  ~ Assani

• ADF Listner when changing the tab

  Hello
  
  I'm on JDeveloper 11.1.2.2.0. Anyone know if there is any Listner that fires when we leave the tab.
  
  We have disclosureListener = ' #{backingBeanScope.» "{< xxBean > .tabdisclosureListener}", although it is enabled when the tab is opened.
  
  I need listner that fires when we leave the tab and control passes to the next tab or header.
  Appreciate your help.
  
  Thank you and best regards,
  JIT

  Hello

  see this article, which, in its explanation, mentions a JavaScript to detect this

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/104-interceptpaneltabswitching-1880961.PDF

  You need to change the code of

  function alertTabSwitch(disclosureEvent){
    var tab = disclosureEvent.getSource();
    if(tab.getDisclosed()==false)
       {  ...
  

  TO

  function alertTabSwitch(disclosureEvent){
    var tab = disclosureEvent.getSource();
    if(tab.getDisclosed()==true)
       {  ...
  

  This will allow you to respond to the tab closing and also to remove the switch, if the conditions are not met

  Frank

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• App icons when alt - tab

  I alt - tab between the applications of hundreds of times every day.  The thin frame around the selected application is a little too thin, too transparent.  Y at - it a setting that I can do to make the selected app outline when alt-tabbing in a dark thick and obvious?

  Hello

  Welcome to the Microsoft community.

  I see that you want the images selected for alt tab to be more visible and more thick.

  We cannot change the size of the image, but you can change the theme to see if it seems to be more visible.

  Reference link:

  http://Windows.Microsoft.com/en-in/Windows7/using-themes

  Come back if you need help on this problem or any other related matter of Windows in the future and we will be happy to help you.

• How to update the table when change list item in the classic report

  Hello
  I worked with apex 4.2 and I create normal classic report with list (named loved) select a column, now I want to update the table when the user changes the list with the new value, I can't create a dynamic action to do this, I create checkbox with the primary key and the loop for check point to update the table but I can not get the value of the list item. and for more speed, the user want to do it when changing the value from the list.
  
  My question
  1. how to do it in javascript and get the value of the list item and update the table with the new value
  2. do I have to use the API to create the list item so I can get the value of the report item or what.
  
  
  
  
  
  Thank you
  
  Ahmed

  You can find a lot of information in this forum (and outside in google) when you search for AJAX processes and demand. However, the tutorial in the link below should be useful:
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/hol08/apexweb20/ajax_otn.htm

  BTW, if we answer your question, don't forget to mark the appropriate post as correct. It will help all of us in the forum.

• Change tab

  Hello
  
  We will have a problem when we try to get the information of the change tab with a MAXL script.
  We see in the change tab which the start and end time are in the format "day MONTH YEAR" (because the language is Spanish) for the three "type of operation" (calculation, loading data, updated hierarchical).
  
  But when we enter this spirit of information a MAXL script with the phrase 'display bases BBDD. APP request_history; "we get in the fields 'request_start_1', 'request_end_1', 'request_start_2', 'request_end_2', 'request_start_3' and 'request_end_3' this date in the format" sat Oct 15 06:19:52 "(par exemple), but the YEAR does note appear and we do not know the reason." "
  
  Are you looking for us using an incorrect sentence MAXL?, how can we get the date of the year?
  
  Thanks for your help.

  I think it's just a matter of column width. The default value is 20 characters - try to use the following first:

  set column_width 30;
  

• ViewStack reload children on the change tab

  So I have a viewstack full of different forms and others. I wish that some of the forms to be destroyed and recreated when I tab far and return to them. These forms should be used more than once, and it would take a lot of work to write something that cleans up manually it. Part of the forms are generated dynamicaly keeps me strapping a model directly to it and just clean. There is a great need, I in my application and I want a cleaner/easier way to do. Ideally I want to be able to recharge a child in the stack view when the tab is changed. For some tabs, I'm not, but I could live with it if they have been refilled.

  Now my solution in Flex 3 is to use a charger module or a viewstack with Chargers of module in the form of views. With the viewstack I would just reload the charger module for the tab selected if I wanted to be reloaded. Unforuntely, is more convenient because of a few additions in Flex 4. It apparently was an abuse of the modules since I was referencing modules outside of them without an interface (which I will not write). I've referenced them in their mediators, which, since they are not referenced in the component view, does not get compiled with them.

  So, how can I do this without using the modules?

  Hello

  You can use mxml for each of your points of view so that the tab that you load the "vision of component/mxml', you may have all conditions for which is replaced and is not - the following is a simple example

  David.

  the App

  ======

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  "xmlns:MX ="library://ns.adobe.com/flex/mx"minWidth ="955"="600"xmlns:local = minHeight" * ">

  Import mx.events.FlexEvent;

  Import mx.events.IndexChangedEvent;

  protected function tn_changeHandler(event:IndexChangedEvent):void

  {

  var myObject:Object = tn.getChildAt (event.newIndex);

  Switch (Event.NewIndex)

  {

  case 0: (myObject as NavigatorContent) .addElement (new comp1());

  case 1: (myObject as NavigatorContent) .addElement (new comp2());

  }

  }

  ]]>

  Page 1 (comp1.mxml)

  ================

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" width = "400" height = "300" >

  page 2 (comp2.mxml)

  ================

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" width = "400" height = "300" >

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• got black screen when changing the screen background images

  got black screen when changing the screen background images

  can any one help

• Should I reset the FPGA FFT when changing the input signal?

  Hello

  I have an application based FlexRIO where I do FFT on several incoming signals. The signals will be ranked so that I get first for example 4096 samples of Ch1 and Ch2 4096 samples, etc. This means that I don't have to do it in parallel of the FFT and I would like to reuse the implementation of FFT and windowing to reduce the use of resources.

  I intend using the VI Express followed by the Express VI of FFT window scaling

  http://zone.NI.com/reference/en-XX/help/371599J-01/lvfpga/fpga_scaled_window/

  http://zone.NI.com/reference/en-XX/help/371599J-01/lvfpga/fpga_fft/

  and I'll use them inside a SCTL.

  This figure comes from the section using the FFT and help illustrate the issue:

  

  There is a discount to zero terminal for the fenestration and the FFT VI.

  Are there internal registers in the windowing and FFT which force the image 1, image 2,... from the same signal or is it possible for the first entry in a framework of Ch1, the next frame belonging to Ch2, Ch3 gaze and so on and always get reliable results?

  Another way to ask the same question: if I have to reset the window and FFT when changing the input signal?

  Thank you

  Anders

  Hi Cyphish,

  When using the FFT of the LabVIEW FPGA vi express and windows nationwide express vi calculations are make it point by point so there will be no problem when going through different types of measures. Therefore, you should have no problem with your application.

  Best regards

  Menelaos.K

• my mouse will not change to the feather, everything changes Ellis 'help '.

  my mouse will not pen change, everything changes Ellis 'help' / I tried everything nothing seems to default default without a default value. ?

  Hello

  1. What is the error code / message appears when you try to change the mouse pointer?
   
  2. do you use third party software to change the mouse pointer?
   
  3. what application are you facing this problem with?
   
  Example: Power point.
   
  4. may I know the operating system installed?

  Example: Windows 7 Professional 32-bit / Windows Vista / Windows XP

   
  5. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  6 are you referring to the options from the link below?
   
  Change the settings of the mouse
   
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings
   
  7 are you using a computer activated key?
   
  Please post the details requested for a better understanding of the issue.

• CSS refresh after javascript DOM change (tab Ajax control) and also refresh the list of objects of Navigation

  Hi all

  When I access a Web page, that I created in the browser or Widget that uses an ASP.NET Ajax Control Toolkit Tabs the action of switching between tabs works well but the tab header does not reflect the change to display the active tab.

  In a standard browser of the tab header will be change / light tone based on the css classnames active Ajax control for settings changes dynamically in the DOM when switching between tabs and I was wondering if maybe the BB browser will not reflect/refresh css when changes on the client side affect the DOM? If that's the case (?) is there a way to force that change somehow?

  Also in the same direction and on the similar question I posted yesterday on switching between Navigation power user mode in a Widget, so javascript client-side dynamically is change the 'x-blackberry-focus' of a DOM object possible to have the change reflected in the Navigation objects? Or is the list of objects that can be traversed only generated load initial page and cannot change without a new post?

  Thank you

  Derek

  I solved the problem with the Ajax Control Toolkit TabContainer uisng having to do a "dummy" DOM change in the TabHeader after that the tab is passed between the tabs then forcing the refresh and repaint the tab headers.