Similar Questions

• Problems with the battery / Satellite A100 - 151 (PSAA9)

  Hello!

  My Toshiba laptop 3/4 years, has had problems with the battery. Battery does not charge properly and to start windows, the laptop down even when the battery is at 70%. Normal use without AC is not possible. The first 3 months, the laptop worked well with no battery problems.

  I hope to get help for my problem.

  Greetings

  Sebastian

  Hi Sebastian

  Maybe is the problem on the battery itself. Without a lot of discussion, I recommend you contact the Service partner in your country. I hope you will get free new battery due to valid warranty.

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Problems with the battery drain on iPhone 6

  Hello! This is my first time posting but I had some problems lately with my iPhone while keeping a charge.

  So, this has started to happen a month ago (exactly one year after I bought my iPhone) and my battery drains just exponentially and evacuates it sometimes when I'm not using it and the internet is not on. For example I'll fully my phone until I fall asleep and I'll put it on airplane mode before going to sleep. By the time I wake up, the battery will be down to 60%. I do not use it during this time, I don't get notifications because all data and the internet is disabled. I do not understand why it is empty.

  Anyway, I've taken to the Apple store Genius bar twice now and they have not been able to fix it. They have tried to restore it... I did that before I went to the Apple store, but they decided to do it again and the second time the guy just told me to turn off all the background app refresh or anything I did but it we continue to attract.

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark. It's so boring, but if anyone else has had a similar situation for advice or assistance would be greatly appreciated.

  a4annalisa wrote:

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark.

  Yes that is exactly what they are trying to avoid. As you explained that you have visited it there twice to attempt to solve this problem, they could have offered to replace your battery for $79 that with your current battery showing 94% of its original capacity, that would not have done much for you at all.

  Have you been having problems with the reception of your carrier recently, when all this started happening? Were you see 1 or 2 points of service when you used to see 3 or 4? When you have restored your iPhone, you restore it as a new iPhone or restore a backup top later? Just try to refine some possibilities for the continuous emission.

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• [Z510] Problems with the battery not charging

  I have ideapad z510 for almost a year. and now my unit still shows that it is at 0% battery. and she indicates that she battery level does not increase. and for this reason I could not use my unit when it is not plugged. What should I do about it?

  Comment to Moderator: New thread is created. The topic is edited to include the model.

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• Problems with the smartphone after CSI updated!

  I recently updated my Live with player at the build.587 and noticed the bugs, most of the people are on (e.g. Messaging bug LED light), my main problem is the battery. My battery drained from 49% to 27% in 2 hours - it's pathetic, I think that there is something wrong. Also I put a restriction on the basic data, no task killer/antivirus, no other "heavy" apps-apart cards. Xperia Mini my brother gets along fine, it gets about 15-20 hours out of it. So what is the problem with my Live, battery saving tips?

  P.S. I have already searched on google but could not find an article "useful."

  Hello

  I tried another method to see if that would work - and he did . I was doing about 5% battery discharge then completely recharged. Now I use it and it works great, it lasts about two days (I turn off at night) and I'm happy with that. Thanks for the advice anyway: smileywink:.

• Problems with the condenser after the recent update tool

  We have problems with the condenser so tool. The filter works correctly, but after a 'white' to use (looks like most exposed) rectangle remains in the image that cannot be deleted. We tried different layer modes without success: it does not react or the rectangle disappears but both the effect of the filter. Seems to be a bug (?) - Please help us as soon as possible. Thank you!

  Hi meuschke,.

  Our engineers are working on this issue, in the average as you try the below work around.

  After you change a 16-bit image using the Liquify Filter, edited areas are lighter than the rest of the image.

  Solution

  In the meantime, there are two solutions:

  Use pictures 8-bit instead of 16-bit images with fluidity

  Disable the GPU use to liquefy holding the key Option (Mac) or Alt (Windows) key down while you select the Liquify Filter in the menu filter.

  Related link: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• Satellite L300 - problem with the battery and with the FN keys

  Hello

  Please help me with the following 2 problems:

  1. I bought 10 L300, 2009 with Vista, and then I switch to Win7. After that the FN do not work. I can use a couple of access keys, but anyway, they do not appear on top of the scr4een as if it was on Vista. You have the solution to work again?

  2. after the upgrade to Win7, my battery is almost dead. I use 230V taken to work on my laptop. I used my laptop properly and it is really surprised that the battery had a life so short. You have a similar experience or you may have a solution to work again?

  Thanks in advance for your help.

  (1) install VAP (value added package) and Flash memory card Support utility.
  For example, you can find the driver area L500 software.

  (2) you can try to define some battery saving options in the power management Windows 7 in order to reduce the working time of battery.
  I switched to Windows 7 and the battery still works fine.

• Problems with the battery in Windows 7

  Original title: battery

  Hi... I have serious problem right now... and this is the first time happened to me or anyone else in my more close...

  This evening I installed new windows for my laptop to another... I installed windows 7 service pack 1 64 bite complete edition for that... and my other laptop is sony vaio PCG - 811114L... but after installing I found the new problem!

  I have this caveat every time when my battery is attached. :

  the battery may not be properly connected to the computer or may not be COMPATIBLE with the computer.

  Click 'OK' to enter hibernation mode, and remove and reinsert the battery.

  See the guide to using electronic vaio (R) for more information on the use of the battery...

  but I did everything said on this cation... my average I removed the battery and even I cleaned battery and... and then I reinsert that... but every time that planning will come again...

  but when I removed the battery and I use my laptop with direct supply (plug in) I have no problem...

  and I forget I have installed the drivers (power management drivers) of the battery and also I checked Device Manager and battery everything seems ok...

  and I should mention that I don't have this problem before changing Windows so this problem is directly linked to the evolution of windows, and all things in this environment... .so please help me please... I need to fix this immediately!

  You're my only hope now... .thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message.

  I suggest you refer to the suggestions of Stanysteve responded on 23 December 2011 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-to-get-rid-of-the-installed-battery-may-not-be/7e323235-D882-4cc8-B578-b76afacc23fb?DB=5

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-VAIO-with-Windows-8-battery-error-message/ec29f14e-f1cd-4638-84ea-63fc91f838e1?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problems with the updates after the system recovery

  Hello.

  After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

  If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

  Someone knows what's the problem?

  Regards Terry

  Hello Terry,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on research.

  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'Windows Update'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, please reset the Windows update components and check.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you