a necessary component of windows media does not start Please restart windows media

Similar Questions

• Adding files in Media Center gives the error "a necessary component of the WMC did not start successfully. Restart WMC. "

  I try to add files to WMC, but when I do a box arrives with "a necessary component of the WMC did not start successfully. Restart WMC"I did this several times, but the same message keeps coming back. Can anyone help?

  I think that your account has administrative privileges.
  You can create another user with administrator privileges and then recheck the problem there.

• Torch 9800 blackBerry Smartphones does not start, please help

  My father was a game in his torch, then he suddenly crash like button works / stop does not work he removed the battery and reinsert it, after that bb keeps on restart loop I tried starting it works then I ask him to remove the application that does crash after reboot I can't transcribe this safe mode and the phone always reboot loop After downloading Director of office of BB I tried to connect the blackberry it recognizes torch 9800, but there is nothing I can do about it. After searching a bit I found "common files" apploader folder might help so I took the opportunity to remove the other app, still does not work in the end, I use apploader /resettofactory to reset the device, it shows a white screen with a bar saying wiping files. After reaching 100% and restart my phone still in restart loop. What should I do now?

  Thanks before

  Hello and welcome to the community!

  You really need get in Mode safe mode again so that you can reload your operating system. You would have gotten lucky that first time with the right timing on the keystrokes... Keep train... I remember it taking a lot try until I'm a model to go properly in Mode without failure.

  Otherwise, these articles may be useful:

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck!

• NSS4100 RAID DOES NOT START, please check that all components are present

  Hi, NSS4100 storage system could start the raid10.

  The message is:

  --

  The RAID boot failure
  Please check that all components are present

  --

  All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data?

  Thank you, Dan

  There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data.

  Here are a few RAID array information:

  (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.)

  (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost)

  (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.)

  (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down)

  (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down)

  (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive)

  (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended.

• Model HP 15-1009ca does not start

  I have had this computer for about two years, he worked earlier today and now nothing I tried to take the battery on an exploitation of power button patati patata always nothing now what

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  It could be a hardware problem or because of corruption in the file system.

  I would like to know;

  1. Do you get the beep or see the light output while turning?
  2. You did any hardware/software changes to your computer?

  If your computer does not start please:

  • Check that the power cord of your computer is connected.

  • Unplug your computer and connect another electrical device (for example, a lamp, a fan or a radio) into the same power outlet. If the device does not work, the problem is the plug, not the computer.

  If you see any light on the computer or sound, follow the steps below:

  Method 1: Run Windows Startup Repair 

  I suggest you to start repair using the Windows 8 DVD.

  Steps to perform the Windows Startup Repair:

  1. If the problem persists, I suggest to perform the startup repair using Windows 8 DVD.
  2. Boot the disk, once you get the home screen of the installation with the option install now
  3. Click repair your computer
  4. On the next page, click Advanced Options
  5. Now, click on Troubleshooting
  6. Finally click on Startup Repair and follow the instructions on the screen

  This may take 15-20 minutes to fix. Once done, try to restart and connect to your desktop computer and check out them.

  If you do not have the DVD of Windows 8.1, I suggest to download and create a bootable media and perform operations.

  Refer to this link:

  To create installation media Windows 8.1

  If it does not, follow the next method.

  Method 2: Check in safe mode

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Mode safe mode appears in the corners of your monitor to identify which Windows mode you are using.

  See the link below:

  Start your computer in safe mode

  You can restart the computer to normal mode.

  Please post back with the results and the information requested, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• A necessary component of widows media center is not available. Please restart Media Center

  Original Windows Media Center title: Vista will not work.  Can not burn discs.

  Have Vista Windows Media Player and when I try to start it says. A necessary component of widows media center is not available. Please restart Media Center. Nothing happens! When I try to burn a disc, it says. A problem when burning the file to disk. For any additional help, click Help on the Web. Nothing happens.

  Hi Stephendoty,

  (1) in order to clarify, the error message appears when you start Windows Media Player or Windows Media Center?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  Method 1: users have solved similar issue by following the steps outlined in the article below. You can run the fixit available in the link below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

  (The section applies to Windows Media Player, described steps works great for Windows Media Center)

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• What are the three steps necessary to correct disk cleanup does not not on Windows Vista?

  What are the three steps necessary to correct disk cleanup does not not on Vista OS

  This tutorial to see how id disk cleanup. See if it helps.

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

• Error - NTLDR missing Windows XP Home computer does not start.

  Original title: XP-based computer does not start.

  XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!

  The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  System32 error, you see, is what exactly?

  Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.

  After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A300-259 does not start on windows

  Hello

  I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
  When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

  Is that what I can do before purchasing a toshiba recovery media disk?

  HARD drive recovery procedure

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Hi mate

  Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

  If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

• Flow 10 7 HP - Windows does not start, I can't get into recovery 8.1 because cannot boot from USB-HELP Please!

  Hi all, I'm new here!

  I am (excuse me: has) with a stream 7

  A few days ago, I tried to install Windows 10 TP renovation 8.1 with Bing. After a while of waiting, he managed, but unfortunately I have forgiven to in SSD Tablet hp drivers, thinking that they were not necessary. If the touchscreen, WiFi and all the other stuff has failed. After I've got collegated by OTG, a keyboard and a mouse, that I managed to use Windows 10.

  Try to install the drivers, my fault, I opened a .exe from Realtek (perhaps for audio), Tablet asked to reboot and after that I can't access Windows anymore.

  I tried to start Windows 8.1 from a USB key, but it does not start, the same even if I disable secure boot.

  With disabled bitlocker Windows gives this error

  

  In the start option, I set these settings

  

  I put the USB in this way:

  

  The stream does not consider the USB absolutely XD

  If I turn on again the secure boot Windows gives this error (which 99% is caused by the .exe I installed):

  

  Restart the flow some time with secure boot it goes in a menu (where touch screen works) where there are a lot of options to reset Windows, but none of them doesn't work. If I try to format in this menu it asks password for my account, but it does not accept the mine :/

  If I try to open the collection (from volume button when it starts less) it gives this message:

  

  Waiting for relief,

  Thank you for your patience!

  @fotogruia in my case, the indicated operating system was windows 10 and as I wrote it has worked well. Good luck!

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• Portege 3490, Windows does not start no-how to reinstall?

  Hello
  I bought a laptop portege flea market in US a few months ago. It was quite a good deal, but unfortunately it came without floppy and cd drives, only with the external network adapter.

  The problem is that now, Windows XP does not start upward due to some mess that I did with Acronis partition software-dos prompt just says:

  From Acronis Loader...

  The Acronis loader: no current configuration file.
  Press to restart...

  I guess that it is not really a problem if I had a floppy or cd drive. Although I would rather buy one just for unique operating system installation. (normally I use lan connection to transfer files between my computer).

  In any case, I would be very happy if you could tell me how boot/install OS using the LAN network connection (how to turn on my desktop pc into a CD drive on the server and dhcp on the network sharing, etc.). I tried to search the Internet to do this, but it is surprisingly bad comments on this topic, and toshiba so do not write on this subject in the manual...

  Best regards
  Aldous

  Hello

  Well, I think that somewhere, there should be information that it supports booting from LAN (PXE). But since this reqiures some heave stuff behind the LAN, it might be a little difficult to tell the whole story in the manual.

  Anyway, the way I am familiar with this is that you can start the machine from the LAN (or rather install the machine of the LAN) If you have an available RIS (Remote Installation Server). This isn't something that people generally have in their homes. What it takes is a Win2000 / XP or Win2003 server with active DHCP server. You will also need to prepare a special 'image' of the installation media (but there is a guide to help you with this in Win2000 server at least).
  After that, it should be fairly simple. Starting the machine of the LAN, get an IP address and by accepting to download the bootstrap of the server, login and then it really looks as if you dΘmarrez from a Windows Media.
  So in short - use it to Win2000/XP/2003 server and support for Windows of choice. Some LAN cables and possibly a switch/hub.

  If you can get your hands on a PC Card (16-bit)! CD Rom and can make a CD bootable, then that could be easier.

  Theoretical, you can also move your HARD drive to another PC and it is
  -install Windows on it

  or

  make 2 partitions and copy Windows Media to the second to the first bootable with f.ex. BACK/Win9X, bring it and install Windows on the first partition when the disc is in the 3490.

  But these 2 varaints gives 2 potential problms as they are complicated to solve:

  If you only install BACK/Win9X on the HARD drive you will get probably the problems to start the HARD drive when you put it in the 3490.

  If you install windows on the HARD disk, you may both get HARD drive boot problems and also get windows to load correctly due to differences in the chipsets.

  Sorry for a lot of words :)

  Good luck!

  Tom