A network upgrade domestic Apple

I intend to clear my British Telecom VDSL router / wireless hub (Home Hub 5) now my interior of power cable and replace with the BT brand modem VDSL2, connection to an Apple Airport Extreme wireless driving and a unit of switch 16 ports (House is wired with ethernet all rooms)

I guess I can manually set the range of IP addresses as I am currently using the range 192.168.1.1 and prefer to maintain this

I'm OK with this hypothesis

Thanks for the tips

I guess I can manually set the range of IP addresses as I am currently using the range 192.168.1.1 and prefer to maintain this

I'm OK with this hypothesis

Yes, you are right. This can be done with the base stations of the airport using AirPort Utility on your iMac, as follows:

  • Run the AirPort Utility.
  • Select the AirPort Extreme and then, select change.
  • Select the network tab.
  • Select Network Options...
  • You can change the DHCP here range.
  • Click on save and then update.

Tags: Wireless

Similar Questions

  • It's recommended to upgrade to Apple Watch Original update

    It's recommended to upgrade to Apple Watch Original update?

    Yes.

  • upgrade of Apple Watch

    is it possible to upgrade? a Apple Watch with series 2

    Hello

    Apple Watch is not currently under the SURVIVOR / trade-in program:

    Apple also offers currently not an upgrade of Apple Watch program.

  • Network: 2 routers Apple broadcasting separate wireless networks; one (Xfinity/Comcast) cable modem

    Hello community!  Need help, I want to use two routers to establish two separate wireless networks on a cable modem connection.  I searched for my answer and see some other threads on this topic, but all are either a bit too technical for me, are incomplete on the answers to my questions - and all seem to be locked.  I have also searched YouTube and only see videos to extend a network with two routers - not my goal.  So here is a long, but a detailed post on what I need someone help with - thank you very much in advance if anyone can all small-not me-I hope it will be useful to others in the future.

    The program installation/hardware: I have internet Comcast/Xfinity that runs to a Motorola surfboard cable modem (SB6141).  I also have two routers apple - a Time Capsule from Apple AirPort (to end 2013) and a new (2016) AirPort Extreme.

    Purpose: This is what I need--I need two separate wireless networks.  Before going further, by using the guest account and 5 GHz of a single router isn't an option for me.  I need to have both wireless networks separate (one of each router), do not talk to each other, or allow access between the two - the only is that they share the Comcast internet gateway.

    My plan is to have the cable modem Surfboard connect to airport Time Capsule, which will then connect to AirPort Extreme (even if it could be reverse - no difference, except that the data that I show below comes from the time Capsule, which is currently connected to the modem cable).

    To read the previous discussions, it seems that the starting point would be: modem router #1 Ethernet WAN, then a router cable #1 LAN Ethernet to the Router #2.

    First issue of clarification - the connecting cable should go to the Ethernet WAN port on the Router #2 or a LAN Ethernet port?

    Now that the first easy question is the road, I need help to configure two routers connected to allow two separate networks.  A lot of discussions about the positions of static IP addresses, cascade, etc..  I need specific help with AirPort Utility on what to change on what router.  It seems obvious that the settings under the 'Internet' and 'Network' tabs are those who need to set - the 'wireless' tabs simply treats the name of the wireless network and settings - these, at least I can understand!

    I'll organise this tabbed - here go us.

    First of all, the "Internet" tab/window Airport utility. Here are the options:

    Connect using: Router #1 has currently DHCP (which I think is OK?) What should it be set to Router #2?

    This tab lists also the current address in IPv4, the (255.255.254.0) subnet mask and the router address.

    It has grayed out information in the boxes for the DNS servers; Name of domain and DNS IPv6 servers.  At the bottom of the window, there is an IPv6 Internet WAN address listed.

    If I click on the "Internet Options" button at the bottom of the window, it takes me to the 'Internet Options' window. Here, there are various IPv6 information - it seems that I can choose the configuration of IPv6 and the IPv6 mode using the drop down boxes/selections were also chosen.  There is also a checkbox 'Enable IPv6 connection sharing'. Are the current settings for these for Router #1: configure IPv6: automatically; IPv6 mode: Native; and check/yes to enable sharing of IPv6.

    Next up, the 'Network' tab utility AirPort/window.

    Here, there is a drop-down menu "Router Mode", a DHCP range listed, and the ability to add or remove reservations DHCP and Port settings.  The DHCP range listed for Router #1 is 10.0.1.2 to 10.0.1.200.  There is currently no reserves DHCP or specified Port settings.  Finally, there is a checkbox to the bottom to "Activate the access control" - it is not currently checked/enabled.

    If I click on the 'Network Options' button at the bottom of the window, it takes me to the "Networking Options" window Here I have areas of entry to specify the DHCP lease duration, can specify the DHCP IPv4 range, as well as part of the extended DHCP IPv4 comments.  There are checkboxes: enable NAT Port Mapping Protocol. Select the host by default (with input if selected text box); Enable the IGMP Snooping; Block incoming IPv6 connections; Allow the Teredo Tunnels; and allow inbound IPSec authentication.

    For this window, here is the current settings on the Router #1:

    DHCP lease is 1 day; Beach DHCP IPv6 is 10.1.2 to 200; Hosts IPv4 DHCP Range is 172.16.42.2 to 200.  The following check boxes are enabled/checked: enable NAT Port Mapping Protocol. Block incoming IPv6 connections; And allow inbound IPSec authentication.

    Who can help me? What parameters, if all do I need to change the #1 router?  How to set up router #2 to make a second wireless network?

    Purpose: This is what I need--I need two separate wireless networks.  Before going further, by using the guest account and 5 GHz of a single router isn't an option for me.  I need to have both wireless networks separate (one of each router), do not talk to each other, or allow access between the two - the only is that they share the Comcast internet gateway.

    What you really need is a combination router / Ethernet switches that s supports VLANdedicated. Given that Apple routers do not, at best, you can potentially get the results that you are looking for, but at a performance cost. In other words, you can have two separate WiFi networks where clients connected to a network can not 'see' those related to another and both routers will always provide access to the Internet through Comcast modem. Note: Arris / Motorola SB6141 isn't a gateway device. Instead, it's a simple modem. A gateway is a router modem combination.

    To do this, should do the following:

    • The Time Capsule (TC) would need to be directly connected to the modem using an Ethernet cable. This base station would remain in its default configuration of the router. In other words, the router Mode (in AirPort Utility) would establish: DHCP and NAT.
    • AirPort Extreme would be directly linked to TB by Ethernet. The cable must be connected to one of the LAN ports on the TC on the WAN port to the extreme. It must also be configured as a router. However, there are differences in the extreme:
      • Use a different name to the Wi - Fi network.
      • Use another range of IP DHCP address. By default, Apple base stations use IP addresses in the 10.0.x.x range. I suggest that you set the base station of the second on 192.168.x.x range.

    There is a major drawback with this configuration. The second base station will be in a State of "Double NAT". Although this "separating" the two networks on different subnets, this condition is not very effective and connected to this network of customers will get lower throughput performance. There is no way around it and it is not recommended.

    First of all, the "Internet" tab/window Airport utility. Here are the options:

    Connect using: Router #1 has currently DHCP (which I think is OK?) What should it be set to Router #2?

    The two should be: DHCP.

    This tab lists also the current address in IPv4, the (255.255.254.0) subnet mask and the router address.

    These leave it as what. The TC is information of IP address of the modem. The extreme, he'll get the TC.

    It has grayed out information in the boxes for the DNS servers; Name of domain and DNS IPv6 servers.  At the bottom of the window, there is an IPv6 Internet WAN address listed.

    These leave it as what.

    If I click on the "Internet Options" button at the bottom of the window, it takes me to the 'Internet Options' window. Here, there are various IPv6 information - it seems that I can choose the configuration of IPv6 and the IPv6 mode using the drop down boxes/selections were also chosen.  There is also a checkbox 'Enable IPv6 connection sharing'. Are the current settings for these for Router #1: configure IPv6: automatically; IPv6 mode: Native; and check/yes to enable sharing of IPv6.

    Unless your ISP provides your IPv6 service, change the IPv6 configuration option to: 'Link-local only' on two base stations.

    Here, there is a drop-down menu "Router Mode", a DHCP range listed, and the ability to add or remove reservations DHCP and Port settings.  The DHCP range listed for Router #1 is 10.0.1.2 to 10.0.1.200.  There is currently no reserves DHCP or specified Port settings.  Finally, there is a checkbox to the bottom to "Activate the access control" - it is not currently checked/enabled.

    Router mode should be: DHCP and NAT to two base stations. Ignore the DHCP reservations and Port settings for now. Let the current DHCP range for the TC. Change the DHCP range for extreme for: 192.168.1.2 a.200. At this point do not access control for each base station.

    Since you seem to need the step by step instructions or need help to understand the different terms networking, I highly recommend that you help you to become familiar with networking, specifically on Apple systems. I suggest you consider taking the e-Book to the next control: take control of your Wi - Fi Applehttps://www.takecontrolbooks.com/apple-wifi network

  • ERROR: Apple iPhone upgrade program-Apple store do not activate the phone or sell me IUP

    So I went on the launch day after waiting inline for more than 90 minutes for a booking of IUP.

    I booked an iPhone ATT 7 because there is no available T Mobile phone because I really wanted to participate in the program of upgrade.

    This forum said I could just swap the ATT with TMO, when I arrived at the store - BAD!

    The representative of the store Apple says if I booked a phone ATT should I start or use an existing att.

    He could just let me no Exchange TMO SIM I had...

    Bank of IUP and the citizen requires the carrier be activated in order to get their hands on the IUP program, he said.

    Suppose that there is little money 'trunk' back-end that Apple and the Bank are paid by the carrier?

    I ended up buying the phone outright without AppleCare and came out with a pay phone.  Sold the next day to a friend who wanted a 7 +.

    So now I'm waiting for Apple to repopulate the TMO phones...

    So beware that you can't just swap SIM cards as previously reported by other members of the forum!

    I thought that the FAQ made quite clearly. - http://www.apple.com/shop/iphone/iphone-upgrade-program. If you wish to register by using the payment plan (my emphasis added):

    When I buy with the iPhone Upgrade Program, is my iPhone 'unlocked '?

    Yes. You can select a new mobile provider or stick to one you have. , We activate your iPhone on your choice of AT & T, Sprint, T-Mobile and Verizon. Once your iPhone is activated, it remains unlocked.

    If you pay in full in and out of the phone (and not enroll in the program to upgrade at all), so no activation is required as part of this process, and you can then throw the SIM included and exposed to one of your choice.

    Since it was announced, the program of upgrading the range always said that you can not leave the store without activation of the service with a participating carrier. However, you are not under any contract and can cancel this service, as you wish. Your device is not locked to the holder of the SIM card, it came with.

  • where can I download Acrobat reader MSI dc for my school's network upgrade

    Hi I am trying to update Acrobat Reader XI DC on our network of schools. Is anywhere I can download a MSI file that I can use our GP to upgrade or an other easy way to move to DC.

    Thank you

    Bara

    Hi barasiva,

    Please download it here: ftp://ftp.adobe.com/pub/adobe/reader/win/AcrobatDC/1500720033/AcroRdrDC1500720033_es_ES.ms I

    Thank you

    Abhishek

  • 554FLB 10Gb - Emulex Corparation HP FlexFabric 2port / 554 M - unstabile after the firmware and the network upgrade driver

    Hello everyone

    I upgraded 2 HP Gen 8 Server on Monday of SPP "2014090.2014_0827.10" firmware and HP ESXi drivers 5.1 U2 September 2014.

    firmware 10.2.340.19

    Driver 10.2.293.0

    After two hours lost both connections to the server. In Configuration/network adapters all missing devices and after awhile they returned to display.

    Network cards have been disabled in the Configuration/network.

    After reboot, all the network were OK but the problem again.

    The only solution I found was a rear roller for the firmware and driver net b2net.

    firmware 4.9.416.0

    Driver 4.9.288.0

    Does anyone have the same problem?

    Thanks and greetings

    Denis

    Yes, I saw two other reports of similar problems.  I happen to run ESXi 5.0 U3, but I was careful to use the latest HP recipe/package of Sept/Oct because of this problem. Check out the blog on this subject at the following site - ICT - Freak.nl

  • Cannot delete the previous post-vm 10 network upgrade


    Hello

    Being execution vCenter 5.5.0 & ESXi 5.5.0 hosts, just upgraded a virtual machine to hardware version 10 and changed the network to a computer virtual port group / VLAN different, but he still remember previous Panel port / VLAN that is to say: a both.

    Tried to remove the NETWORK card with it on or off the power, but even in this case in the web client, it shows that it connected to port local VIRTUAL precedent/group/network.

    Hello

    I've seen this problem on the VMS with snapshots, are there for this virtual machine snapshots? If so, remove the snapshot and portgroup VM Rassie information should disappear.

    Arun-

    http://highoncloud.blogspot.in/

    Virtualization VMware on NetApp

  • Upgrade of Apple?

    Hello. I am currently successfully using Lightroom 2.x on a Windows Vista based computer quad core. My wife and I saw the new iMac quad core with OS x Snow Leopard OS computer (we also fell in love with his superb 27 "screen) and thought, it might be time to become an Apple user. I have two questions please:

    1 is there a compatible version of LR for this computer? And:

    2 Adobe LR offers upgrades platforms or will I need to buy the Apple version nine at its retail price?

    Thank you very much in advance for any response. Andy.

    You can legally use the same license on two computers, regardless of the operating system and the type of computer (laptop or desktop), as long as the two are not used at the same time. Enjoy with a clear conscience.

  • Mac pro tech specs and how upgrades work apple hardware?

    Hello guys,.

    My colleague from modding pc just got a mac pro and I have just read his record about 5 minutes ago and I discovered there xeons, ram ecc and over-pants on it. I've never touched before apple products, and I don't know how they work. So I came here for your help.

    I see similarities to the msi with the mac pro vortex. Motherboards are the same? even if they are, does anyone have full features on the mac pro?

    -The moterboard chipset?

    -Which plug to use?

    -Number of pcie 16 x housing?

    -Output power of psu Board?

    -Number of fan on the motherboard headers?

    -Support hotswap and raid?

    -MOST IMPORTANT: how to enter the bios?

    Main question:

    I want to try to Exchange and equip inside the mac pro with what is on the test bench for a project at random and to see the scores of benchmark on apple os and etc will this work? (As I said it, a 0 on the orders of apple experience)

    * material I want to Exchange in the mac pro: there is a 980ti of reference and sticks of ram ddr4 hyperx to the test

    What model Mac Pro?

    How to identify models Mac Pro - Apple Support

    Start is a small trash can black or silver 35 lb round?

  • Phorosmart d 5510: printer does not connect to the network upgrade

    A combination of problems:

    I recently updated my broadband and also bought a new computer

    Today my printer has stopped working. I tried to reinstall, but my desktop computer, or laptop can connect with him. I checked this is the connection to the server, but it will connect with the SSID of 2.4 ghz. WiFi on my computer works with the SSID of 5 ghz. I guess that's the problem, but the printer will not recognize or find the SSID of 5 ghz

    Hello Dudley151,

    Thanks for stopping by the HP community! I see that you are facing problems with wireless connection. You have changed networks and are unable to get the connected printer.

    Yes, the problem is HP printers are not compatible with the 5.0 GHz networks.

    To get a better understanding, take a look here: wireless printing Center

    I hope that answers your question.

    This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

  • How can I see what devices are files on network sharing domestic?

    I have a ps3 & Xbox which can share files stored on my pc but I can't seem to find what/how you would you find... ? I am a novice, so go easy on me!  :-/

    Hi Adybboy,

    Follow these steps:

    (a) go to the Control Panel, then network connection.

    (b) click the my network place.

    (c) view of computer network device.

    There you can see what is installed.

  • Unable to delete a folder, once created and made common, my network place domestic, although I eliminated the prorotype of the folder inside the C.

    I create a folder, put it in common use and it appears as well as a branch in the plan on my local network. I can put some content in this folder. Sometimes I decide that this folder with its files is of no use to me and delete the folder of C. sometimes, it happens that the image in this folder, even empty, freezes on the plan of the network without being able to remove it from there. How can I get rid of this annoying and useless image?

    Hey Eagle54ZY,

    Try to use the steps in this article to remove the share of the computer that is located in the folder:
    Stop sharing a folder or drive

    If the folder still appears in Windows Explorer, try pressing F5 on your keyboard to refresh the items that are displayed.

    Hope that helps.

  • Remove recorded tv on win7 professional win7 networked machine domestic premiium machine

    I have 2 machines of win7 on a network, the two different recording tv programs. How can I get both machines to remove records of these two machines?

    What is the best way to remove recorded TV shows?

  • Why can't I read my PDFs with CD player after the upgrade of Apple OS 10.11?

    Two days ago I could read my PDFs with Acrobat Reader DC while running OS 10.9 on my Mac Mini. Today, I upgraded to OS 10.11 (El Capitan), but now I can't read my PDF files. The player will launch, but never to show the document. No error message. No matter if I try to open the PDF file by clicking or using file > open.

    So far, I have:

    (1) removed and reinstalled Acrobat Reader DC.

    2) updated the player via the menu help. 2015.009.20077 running. By the Adobe website, I am told that it is the most recent version.

    3) based on a forum comment, I disabled both plugins Adobe in my folder of Plugins from the Internet. No effect. The replaced. No effect.

    4) based on a forum comment, I registered on the Adobe Web site... and so that's why I can of this type. Confirm my email address. Connected. No effect.

    5) based on a troubleshooting page, I did so that the operating system will be associated with the single CD with pdf files. Not found a problem there.

    How can I fix this so I can read PDF files that I have read two days ago?

    Hi Robert,.

    Try to install the reader here XI: Adobe - Adobe Acrobat Reader DC Distribution and check if you are able to open a PDF file or not.

    Thank you

    Abhishek

Maybe you are looking for

  • I get a weird, not sure email that's Apple

    < image edited by host to remove personal information >

  • When will Firefox 3 be End-Of-Life be?

    There was no official word from Mozilla on a date for end of life for the Firefox 3 version? I support Firefox 3 and 11 in a corporate environment and would like to know if we need begin to gradually eliminate version 3.

  • E-mail hotlinks causing mail to freeze iP5s

    Out of the blue my phone starting freezing every time I have toast on a link in an e-mail.   Safari does not open and I can't scroll or close the post as soon as I click on the hotlinks.  Everything works fine until then.   Safari works very well in

  • Wireless connection to the network home

    I recently bought a Tecra8200 with free Wi - Fi. I have a XPprof Windows installed on it. When trying to connect to my home network with wireless lan functionality, I am not able to connect to my router Sitecom WL-025. (cables) In exceptional cases,

  • Tecra 9100 for TV connection problems

    Hello I hope that im asking this question in line. I tried to connect my laptop to my tv without success I pass the cable in the left side of the laptop and plug the other end to the video output on the tv I have both put power off and power on, but