A no Windows Update has shown as successful

Similar Questions

• Windows updates has shown installation but when checked 0kb installed and the icon was missing from the tray (Win XP sp3 IE6)

  original title: another missing Windows updates missing yellow icon (Win XP sp3 IE6)
   
  I'm having the same problem also.

  Windows XP sp3 with IE6. All updates applied excluding this last batch with the numbers you mention, except for two of them.

  I can tell you that, just as usual, the yellow icon was present when downloading these updates were. Then he disappeared after that that they have been fully downloaded.

  Interestingly, I went to Microsoft Update to check to see the new updates and found downloaded after checked for updates, BUT when I dropped down the details for them they all showed 0 KB!

  Here are the updates, that he sent to me (last

  Ko

  2559049

  2567680

  2566454

  2562937

  8900380

  2570222

  2536276

  and the MSE customer update kb 2544035.

  The only one who showed no 0Ko was a MS Security Essentials client update number kb2544035 with 7kb.

  I tested two updates from win xp to see if they would be set up and they did, here are the numbers... .kb8900380 and kb2567680

  kb8900380 is the edition of August 2011 of malware removal tool.

  I tested and found that it was actually installed and worked.

  Just one thing. I noticed on restart every time the yellow icon appears in the status bar but only flashes for a second or two, then

  disappears once more. I tried to quickly click on it but it does not.

  I then checked the taskbar customize notification and I found that it presents itself as an element of the past and said that it is associated with the download of updates.

  Syed N:

  Thanks for your suggestions.
  I wanted to post back to update everyone on my current situation.
  I was going to ask your manual correction of the WSUS... when I got home tonight. However, at the start of my PC tonight the Automatic Update icon (yellow) was actually download updates once more and things work like they are supposed to. After the download, the icon shows the balloon which informs you that you have updates available and when I clicked on the icon it was admissible and that it took me to the menu as usual at the.
  Then, I tested several updates in the menu of the AU and downloaded. They were installed properly and allow them left unchecked the icon stay in the tray as usual.
  I don't know what happened, but things are now correct.
  You have an overview on why things "fixed", I would be interested to know the why of it. !!!!!!! It is interesting to me.
  Maybe the MS is really followed this site and or you guys relay these flaws in MS for the correction.
  Thanks for your suggestions, I've forgotten to be able to reset the update components!
  Finally, Syed:
  If you can relay the suggestion to MS. I always liked Windows and like the superior ability I have to control aspects of it unlike OSX (Apple MAC) however the link low is a win (including 7) WIndows update mechanism. I was lucky for me and my family, I'm enough common sense to know how to apply updates to avoid the problems of the operating system, but not everyone has this education and too many times same own OS Win with very little in option programs/software and hardware drivers downloaded) have more up-to-date flaws then seems reasonable.
  I would like to see MS improve WSUS and also more importantly still provide and ENCOURAGE users to take and the advantage of teaching material that MS can offer users to consumers.
  PA bear:
  Also thank you for your suggestions. I didn't know that MSE is a culprit in this issue, but you never know.
  I have

• Windows Update has not been installed successfully in 8 months (error codes: 8007371B & 643)

  original title: Windows Update has not been installed successfully in 8 months

  Windows needs to install 7 updates each time I receive the notification. in any case, he attempts and succeeds only and him remains always fail. Those who succeed keep be redownloaded too, so I really have no idea if it's REALLY successful.

  Error codes:

  Code 8007371B

  Code 643

  And the last 4 are as follows:

  Code 8007371B

  The success is always to:

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  Thank you

  -Mike

  Run the tool and then try WU.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• Windows Update has encountered an unknown error. Code 80070026

  Windows Update has encountered an unknown error. 80070026 code that performs updates not be installed

  Although this page shows a different result code then what you see, please follow the steps on this page-
  Windows Update error 80070490

  Be sure to download the Version of (CheckSUR) system update readiness tool that matches both the edition of Windows installed and the architecture of the system.
  To see what is the architecture, open system in Control Panel.
  The architecture of the system appears under system, next to system type:

  When CheckSUR has finished download, set up the system before running the boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall and make sure that the native Windows Firewall is now on. The systemmust be connected to the internet when you run CheckSUR.

  Once you have restarted the clean boot state, run CheckSUR.
  Restart the boot state minimum same once it is finished and see if the system can search and detect updates necessary now.
  If possible, suggest that see you if the system can install the updates now.

  Cancel the Clean boot steps State now and restart the system once more.
  If this does not solve the problem of installation of update, then do a "upgrade on-site" aka Repair Installation, as described on the Windows Update 80070490 error page.

  Expert MowGreen Windows IT Pro - consumer safety

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  http://support.Microsoft.com/kb/946414

  «"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»

  Follow the information given in the above link to solve your problem.

  See you soon. Mick Murphy - Microsoft partner

• Windows Update has encountered an error and cannot display the requested...

  I tried Windows Update and got the answer "Windows Update has encountered an error and cannot display the request... »

  Hello

  (1) what is the description which are impossible to install updates?

  I suggest to follow the steps provided and check if it helps.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update: http://support.microsoft.com/kb/883614

  Hope this information is useful.

• How to remove a windows update has failed? C-Media Electronics Incorporation-Sound-CMI8738/C3DX PCI Audio Device

  I can't install an audio controller because of a windows update has failed. How can I remove this update?

  Hi Rodney Hilzendeger,

  If you want to remove or hide Windows Update failure, then follow the steps below:

  a. go to the Windows Update Web site

  b. Select CUSTOM and scan

  c. right-click on the update that you want to hide

  d. click hide update

  You can also consult the following Knowledge Base article Microsoft for more information on troubleshooting didn't update problem:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

  Original title: Windows Update stopped working Vista Home Basic.

  HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

  Hello

  Question: Windows Update has stopped working

  1. do you get an error message when you try to update?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems with the installation of updates (Windows Vista)

  Question: display Error Code 43 adapter has stopped the unit

  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows (Fixit)

  Hope this information helps.

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• CODE - 641 Windows update has encountered an error of unkonwn. How to get this right

  CODE - 641 Windows update has encountered an error of unkonwn.  How to get this right

  Try to run the tool:

  http://support.Microsoft.com/mats/windows_update/

• Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  SQL 2005?

  Download and install from here... http://www.Microsoft.com/en-US/Download/details.aspx?ID=7218

• Windows Update has encountered an error unknown coed 80072EFE

  Windows Update has encountered an error unknown coed 80072EFE

  Hi Larry,

  I suggest you follow the link and check if it helps.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates