Similar Questions

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problems with the Realtek and Plug-and-Play driver

  Until recently, I noticed a red circle with an X in it by the sound on the taskbar icon. When I switch on it it says no audio device installed and when I go into the Device Manager there is a yellow triangle on my Realtek High Def Audio Driver. When I click on it I get this error:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  The Plug-and-Play driver also seems to give me the same exact error (Code 52) and has the yellow triangle next to him as well.

  Hi Eric,.

  This problem occurred if the driver can be signed or corrupted.

  I suggest you go to the Web to Realtek site, download and install the drivers by selecting the right device.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.

• MrtRate non Plug - and - Play driver displays the error message "this device is not working properly, or does not have all its drivers installed (Code 24)."

  Convenience store recommended remove and reinstall to resolve problems.  Cannot locate the driver using the Add Hardware Wizard to reinstall by troubleshooting tips.

  Do I need this driver for my Dell PC under Windows XP Home Edition SP 3 or if I can't ignore the deletion?

  If I need to reinstall the driver of mrtRate, where I can get it?

  Ganeles Hello death,

  Thank you for your message.  After studying this problem, it seems that it is caused by the Quicken software.  Click HERE and run through the troubleshooting process.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Missing non-Plug-and-Play driver?

  I get a message that MpKsl052983e0 is absent or does not have all the installed components. What is - this and how do I get it? I have a Toshiba NB505 mini notebook (a netbook) with Windows 7 Starter, which is maybe 3 years old. Any help will be greatly appreciated!

  Source of the message?

  He is a pilot with the random name that is associated with Microsoft Security Essentials or Windows Defender. A new is created whenever MSE is updated. Occasionally, a reference to a former is left. This will not cause you any problem.

• Agilent 4156 new driver plug-and-play (pulse-installation problem)

  Hello, I am new to Labview and just started using the Agilent 4156 new plug-and-play driver published on 02/12/2008. I try first to set up conditions of STRESS using this project. While I am able to configure most of the things that I need, I can't set the peak pulse value using the program "Set Pulse.vi". The Readme for the driver mentioned that this program has not been tested. The error message is the following:

  Reports of the instrument:
  + 181, "illegal installation. Invalid command. »
  -113, "undefined header."
  + 0, "no error".

  Can someone help me with this problem?

  Thank you.

  Thanks for your reply.

  I think I solved the problem. There are syntax errors in the "set up" Pulse.vi (PUL has been used instead of PULS in two places). He is now able to set the basic and advanced.

  In addition, the way is designed the vi, it will always give an error because he tries to put in tension (possible only when a VIEW is of type V) 'Source' and 'Base' / 'Peak' tensions (only possible when the PGU is a type VPULSE). I removed the parts that I didn't need.

  FYI, I use an Agilent 4156 C. In the configuration screen, the revision of the CPU is 1 and the revision of the software (03.06 HOSTC, CUMS 04.07, ADC 01.00).

• Staging Drivers for Plug-and-Play with HP RemovePNPDrivers utility

  This video describes how to download and extract the software, delete the printer driver HP staging of files using the HP RemovePNPDrivers, package and stage a driver using the HP Driver Utility (DDU) Deployment, perform a Plug-and-Play driver installation and verify that appropriate driver is installed.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this information useful.

• Plug and Play drivers: Instrument of Identification error (pumps Ultra PHD at Harvard)

  Hi all! I use the LabView drivers to control a unit of Harvard pump 70-3007 and fall on some issues. (I'm controlling through the USB port).

  Driver:

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=16026

  Plug-and-Play site:

  http://www.NI.com/white-paper/3271/en/

  So I downloaded and installed the drivers and made sure that I have ALL the necessary software (USB virtual COM and VISA) installed. I then used teraterm (serial port communication software) to make sure my computer can communicate with the pump. He could.

  I then moved in labview, to make sure that my computer can control the pump. He couldn't. As soon as I try to screw attached with the drivers, I get an error. The first step in each VI is to call an Initialize.VI that makes a 'Identification of Instrumentation' stage, which always generates an error. He tells me that either I have wrong COM port (I assure you, I did not) or that the instrument drivers are not updated. HM.

  Any ideas? Of course, I know probably no one here has used this series of pumps before, so if there is no additional information / screws I can join, please let me know.

  
  

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HARD drive external, Toshiba PX1395E, not plug and play in Windows XP

  Hi all

  Thanks for reading this.

  Just bought a number of HDD 2.0 USB 750 GB external PX1395E.
  I want to use to back up files from my old computer to my new computer.
  In fact, my old pc recognizes the HARD drive (plug-and-play) and I already copied the required data.

  BUT: my new computer, with Windows XP Professional, Service pack 3. Does NOT recognize the HARD drive.
  I used several (versions 1.1 and 2.0) USB ports and everything is connected to the way that it should.
  Windows tells me that I have plugged 'something', but is unable to recognize what it is and I can't use the material.

  I think I need a driver to make this work. Site Web de Toshiba does not provide this particular driver (I checked, but it cannot find).

  Is there anyone with a solution?

  Thanks in advance.

  Do you see the HARD drive in the disk management?
  Control Panel-administrative tools-online-online disk management computer management online

  Another way is that reinstall you the chipset driver. Look at the Toshiba site to download and choose the right one.

  Look for yellow exclamation marks Device Manager.

  Let me know, what you're doing.

• Windows XP SP3 USB errors / unknown devices with Plug and Play

  I have problems with USB flash drives and other plug-and-play devices detected by windows. After taking all possible measures to correct this problem (e.g. windows update, chip / update of the bios, update driver, driver and media ultilites reinstall, uninstall and allow windows update after restarting, removal of hidden devices and even remote tech support from Dell) whenever I connect a flash drive or use all plug-and-play devices it is detected as an unknown device and I can not put updated pilot any port I use. Hardware problems were excluded dute to recognition of the device and USB keyboard and USB mouse are functioning properly. Also these same plug-and-play devices worked well on other items of work. After Googling my eyeballs, I gave up and need help please. The only thing I can do now is to reinstall the operating system that really, really, I don't want to do.

  UPDATE *.

  Dell has replaced the motherboard and the problem was solved. Thanks to all here who offered advice and patience.

• 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

  1 error windows must now restart because the plug-and-play service terminated unexpectedly
  error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
  -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

  Hi nevil.fidelis,
   
   
  This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

  You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

  For additional help please refer to the following thread also:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  You can also check the positions of the TCD in the thread below on
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
   
  Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.