A problem of time unusual Windows: time of Windows always comes back to the year 2005

Similar Questions

• After, the "floppy" and removing, using that I keep getting a message "Unable to read the articles" I used the button "cancle" a dozen times, but he always comes back. any ideas?.

  Nothing so far, you have tried many things.

  Hello
   
  
  1. is this a problem with all the readers of the floppy disk that you use, or is it limited to a particular floppy drive?
  2. when the floppy drive was working properly the last time?
  
  Check if the problem exists in Safe Mode, if the drive works as expected in mode safe, and then we can solve the problem in the clean boot state. It is a possibility that another application is at the origin of the conflict.
  
  Step has. See the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  Step B. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BCCode:9f every time when Windows 7 comes back from the suspend mode

  Every time when my laptop back into hibernation mode, it gives me option to start in same mode or start windows normally. When the computer starts, it gives the error message. :

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7600.2.0.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 9f

  BCP1: 0000000000000003

  BCP2: FFFFFA80024FC700

  BCP3: FFFFF80004404518

  BCP4: FFFFFA80031124E0

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\042210-19609-01.dmp

  C:\Windows\Temp\WER-46191-0.SysData.XML

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  I use DELL XPS1330

  NZM

  Hello

  try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby, hibernation, or when you restart the computer: "0x9F ".

  Open the site http://support.microsoft.com/kb/975599 and click on the link view and request hotfix downloads , select the platform (x 86 or x 64) and type in your email twice and type the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart. The problem is solved?

  If this is not the case, download the dmp in the C:\Windows\Minidump on your SkyDrive folder and post the link here, so we can look at landfills.

  Best regards
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Update - it gets to the final stage of the update every time it goes to "Starting Windows" and then it all comes back to the update

  Original title: Windows Update keeps reseting

  My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.

  Hi Reilly,

  Thank you for the update on that.

  Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.

  If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.
   

  Also you can restore the system in safe mode.

  Check out the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Please answer us with the State to proceed to further troubleshooting.

• I can't open firefox. Home page comes up, I get just the reporter Crash asking to restart/quit but every time I do the same message always comes back.

  I can't open Firefox. Home page comes up, I get just the reporter Crash asking me to restart/quit but every time I do the same message always comes back. I was not able to use Firefox for days now.

  In recent days, we have a lot of crashes with Trusteer report. If you have this program, try to disable it and see if that stops the noise.
  
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  
  http://www.Trusteer.com/support/en/report-problem

  If you do not report, so we have a crash report ID. When you send a report of the Mozilla crash puts it right in a gigantic database. We have no way to seek without the ID of the report. I don't know what the problem is without searching the crash report. Please get the ID of your last report of the accident report.
  
  See https://support.mozilla.com/en-US/kb/Firefox%20crashes
  
  or http://kb.mozillazine.org/Firefox_crashes

• Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.

  Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.   Anyone who has similar problems and no one knows if there is a resolution?

  Thank you

  Johanine

  I hope that they address it quickly.  It is painful to have discovered my renowned PDFs are to difficult to identify file names their given by their authors.

• Can restore my computer-how I restore my computer (Windows Vista Premium) back in the day, it was brand new?

  How can I restore my computer (Windows Vista Premium) back in the day, it was brand new?  I want to clean the top/everything, yes everything!    Help! PLEASE

  Hello

  Here are the different ways to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• Cannot change the privacy of my story setting. He always comes back to save history. I tried all the possible solutions without change. Any help for this problem?

  I tried to change my privacy settings for history to remember the history of custom settings and he returned always to remember history. I tried all the fixes including refreshing Firefox, by removing the prefs.js file, check my Norton Security Suite to be sure that Firefox Cleanup is disabled, synchronization is turned off and all the other recommendations I can find with an online search of the problem. Another that a deletion total Firefox and fresh installation is there any other recommendation that I can try allowing the change in my setting of the story.
  The reason why I ask is recently that my browser does not store cookies permanently. When I try to enter a password sites (my Bank for example), I have to answer a question before you enter my password. I have to do this every day. Previously, I was able to save the computer and should not be the question that arises, unless I have cleared my cache, history and cookies. However, it seems that cookies seem to disappear when I close the computer power off or after an unknown period of time and I have to go through the procedure to properly identify myself and my computer on the site. This is a private computer with no access by someone else and it became cumbersome to re-enter the requested information whenever I go to some of my usual sites.
  I use Windows 7 Ultimate with 37.0.1 Firefox as my browser. Any help is greatly appreciated.

  The problem only occurs when you restart Windows and not between the closing and startup of Firefox without having to restart Windows?

  Outside Norton, do you have any other utility that can 'clean up' browser like CCleaner settings?

• Windows cannot find back to the top before you reinstall Visa Business x 32.

  As I had problems with windows, the decision was made to reinstall Vista Business x 32; has SP2. Before that, I did a return upwards using the windows towards the high utility (I had done this for the last 18 months). I can find the back of the files on the external hard drive (PC name, backup set of 1st registration, I've done the reverse and then the following dates that I saved the last date with 12.8 GB). I get the message that it is not save ti available use. I tried to use the method advanced and always impossible to get anything. I tried to boot in safe mode and got the message that this operation was not available in safe mode. The problems that I had with windows has been fixed with the resettlement, but I would really like to get my files back.

  Thanks in advance.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.

  Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps. If this isn't the case after back and we're going to try something else.  It may have something to do with permissions or the files there and we will discuss these options (and perhaps other institutions).

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Player comes back to the initial settings

  I've seen that several times during the construction of a PC. One of the things I do is start Windows Media Player and set the player / ripping the defaults; WMP works very well. This time, however, after the hours of use, mainly surfing using IE11, I tried to listen to music in my music. But when WMP displayed on the screen, I saw the first screen, who asks whether I want recommended settings. When I clicked on recommended settings and clicked on OK (or Yes or something else), they showed me WMP with my previous settings. I ran full scans with Malwarebytes Pro and F-Secure, but found nothing. Is it a side effect of the updates published on this last Patch Tuesday, or is there another reason why this would happen?

  latest updates of windholes did this damage,
  ruin of the media player settings all users.
  don't know which update it was well,
  had to walk another person through this yesterday while they have tried to use WiMP and got first use of new dialog box.

• I'm unable to send e-mails. They always come back with an error indicating that Windows Live Mail error ID: 0x800CCC0E

  original title: I CAN'T SEND EMAIL

  IF THE CYBER LINK U CAM MAIL COMES BACK WITH AN ERROR

  The connection to the server has failed.

  Topic "
  Server: 'smtp.live.com '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): Yes
  Socket error: 10060

  ALSO WHEN I'M ON THE INTERNET AND I WANT TO SEND A MESSAGE PULLED AN ARTICLE OR SOMEONE SAY OBTAINING EMPLOYMENT, OR FOR CONTACT, I CAN'T; APPEARS IT ABOVE

  NOW, IF I AM ON ANY OF MY ACCOUNTS EMAIL, NO PROBLEM; M

  In these forums, you will find support for Windows Live Mail: http://windowslivehelp.com/forums.aspx?productid=15

  See also http://windowslivehelp.com/solution.aspx?solutionid=47ff78a2-56b4-4e72-a9bf-0024217aeac6

• Windows Update comes back with windows is underway

  Original title: update windows windows vista,.

  I have windows vista, I have windows select update and it comes back with windows is current, but this has been ongoing for more than a month.  I don't think that the update works correctly

  Hi DanielSkees,

  1. are you encounter problems with this web address?

  2 are you able to access the IE9 Web sites? Your IE 9 works well?

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also check Windows update to installed updates history.

  See the Windows updates are installed

  Hope this information is useful.

• Windows (vista) could start even in safe mode. disk repair and system restore do nothing. all comes back to the same error screen

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\config\system

  Status: 0 x 0000225

  Info: Windows could not load because the system registry file is missing or corrupt.

  Enter = continue or esc = exit

  I put in the repair disk and need to "select" system none were so I click Next and let it run for the night, about 12 hours later the blue progress bar was still in progress on the same window so I guess it doesn't work anymore. I would like to reinstall windows, but I can't drive to format...

  Go into the BIOS

  Then look for boot options, or boot order
  Change the boot order to boot from the CD / DVD rom (i.e. does not start from the HD, boot from the cd to install disks).
  Now you can do a full reinstall but that your last resort.

• WINDOWS SCREEN COMES UP WITH THE BARS MOVING ON THE SCREEN BUT WILL GO NO FURTHER LOADING.

  THE WINDOWS SCREEN COMES WITH THE BARS MOVING ON THE SCREEN BUT WILL NOT GO FURTHER.

  Hello

  its possible your video drivers of meetings required.

  Info

  http://www.ehow.com/how_4921037_update-display-drivers-Windows-XP.html