a repeat loop

Hi, I need the error message that the first time, seems. See the attached file. When the error in the string it appears errormessage, but he continues to repeat every time it senses the right channel Match.What is best way to handle this case? any suggestions? Thank you.

As the previous poster indicated, place the flag in a shift register, which is reset by any boolean you start the test with. See attachment.

Tags: NI Software

Similar Questions

  • control flash movieClips from inside the repeat loop

    Hi guys

    I have a flash sprite in my partition that contains 20 movieClips named button1 to button20.
    I'm trying to rewind the movieClips touch to their executives 1 go in a loop of repetition, I tried a few different methods, but may not know!

    This code works: sprite (11).button1.goToAndStop (1)

    Does anyone at - he had success this?


    Thank you very much

    Hi guys, I thought about it.
    I ended up setting a benchmark for the clips using getVariable()

    Posted the code, might be useful!
    -------------------------------------------------------------------------------
    pFlashButton property

    Repeat with i = 1 to 20
    pFlashButton = getvariable (sprite (11), #button & i, False)
    pFlashButton.goToAndStop (1)
    end repeat
    -------------------------------------------------------------------------------

    See you soon

  • Audio display problem - stutter, repeat / loops

    I'm having a problem after making and exporting to a file, a small part of the audio stutters and repeats. I tried to export using different codecs (h.264, pro res) - the problem persists. It's always the same audio portion each time.

    As a test, I isolated this part and marked on/off it has exported as a clip and the problem was gone. The problem seems to occur only when I try to export the entire sequence. Other tests I tried and failed: place in a layer of audio slug, export audio as a .acc and re-import audio on a single layer and turn off all audio layers existing

    I use SOUL for export. Another problem (?) when I try to do a direct export of first - it goes right down.

    Someone at - it this problem and workarounds? Thank you

    System:

    iMac 2013

    El Capitan 10.11.5

    Latest creation CC Pro, SOUL CC update

    Update Premiere Pro. It should be fixed.

  • Repeat/loop small amount of code.

    Hi how to make this code is constantly repeating, because it runs once. Im not very good with the listeners, I know functions and variable etc. If im not so bad. Help, please.

    Code:

    If (health < = 0) {}
    gotoAndStop ("mainDead");
    }

    Its on a framework, not a MC.

    AC 2

    Thank you.

    Try the following...

    this.onEnterFrame = function() {}
    If (health<=0)>

    delete onEnterFrame;

    gotoAndStop ("mainDead");
    }
    }

  • Delay loop

    Hi guys,.

    I am new to Labview, hope to get an idea how to proceed:

    I do driling process for all 200 holes.  Each hole takes about 2secs to drill, and the distance between the holes is 3 seconds. I am interested to get data for drilling only and neglect the tool to travel between the holes.

    I had the idea of delaying the loop (for travel to the tool) using "wait unti next ms ', that I put for 3secs. But how to set my loop past and collect data for 2secs before that?, I put the number of samples to be 1000 with sampling frequency of 1 kHz.

    Thank you.

    Technically, it of wait, measure (2 k samples, 1 kHz), repeat loop. State machine, sequence loop, etc.

    The problem is in the clock. You say it takes all 3 sec to move and about 2 sec to Pierce. Error in the specification of time of 2 ms on every stage and you are disabled by the 200 - th hole per second. By program (not in real time), you can synchronize loops (reading data and movement) with a precision of 10 ms, I would say, no more. Displacement also break between holes takes different time.

    I collect all the data, and then divide it into parts of holes if you can (looking for peaks, etc., I don't know if there is a significant difference between the drilling data and movement data. Treatment can be done on the fly or after collection.

    If you have important signal level changes - you can try an analog trigger = gain when the signal passes through the specified level.

    Otherwise, you need a digital signal to trigger the acquisition at the start of each borehole.

  • Simple question: timed period while loops

    Hello

    I have a timed loop, and if the user presses a button "repeat" loop runs until 'repeat' is set to false. I want the loop to iterate over a given period, including user input. Inside the loop, a square wave pulse is created based on the parameters provided by the user, then displayed on a waveform graph.

    However, when I change some of the initial settings of the square wave, for example from tension, the waveform graph is updated instantly. I want the waveform graph only be updated based on the period provided by the user, all say a second. I tried to set the period of entry into different amounts of 10000 a.0001, but always updated at the same time waveform graph.

    I'm not sure what I'm missing, but I'm sure it's something trivial. My VI is attached. Any help will be appreciated.

    I don't understand what your problem is.

    If I run your VI (and hit the repeat button firstly, otherwise VI blink tracks then stops) and make changes to tensions, duration or delay, it will take a little time or a lot of time according to the what is the length of the loop, and where I do the modification to controls during the delay of the loop.

    (With a period of 5000 milliseconds, a change can take up to 5 seconds to show in the event where you make the change right after the beginning of the loop.)  «(Or it may take a fraction of a second if you make the change just before the loop iteration ends).»

    Maybe you can give us a configuration of the parameters, we should enter each controls (even better puts these settings yourself, do the default values, and then save the VI before posting) as well as specific guidance on what we should do to recreate all that is your problem.

  • Printing win 7 guest, the printer queue maintains a loop and increases the size of the file

    Hi all

    That are running Windows 7 enterprise and on another professional machine, same results:

    I share a "laser" on the USB printer, the printer works very well under windows prgms...  (all as administrator)

    Open CMD window:

    "net use LPT2: \\hp1\laser / persistent: Yes" command complete and looks good in "Net view \\hp1".

    Now, I open the print queue window and try printing a text file:

    "print test.txt > lpt2" command appears to complete.  (Same results for copy, etc.)

    I now see the file appear in the print queue, flashing, saying: rolling/printing, repeating & loop, and each Flash increases the size of the file!

    I tried to change the Port LPT1 and 3

    Nothing prints, because I have to stop the spooler, delete the file, start the spooler to clear.

    What happens on two different machines, I'm totally stuck!

    Help appreciated!

    Hello Stan,

    Thank you for visiting the Microsoft Community Forum.

    The question you asked is more complex than what is generally answered in the Microsoft Community Forums. We have a support forum dedicated to complex issues. I suggest you to send your query on Microsoft TechNet forum. You can get more effective suggestions and adapted by experts familiar with this topic. Your understanding is appreciated.

    Here is the link:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

    Hope this information is useful. Feel free to write us again to the case where you are facing in the future any other problem with Windows. We will be happy to help you.

  • How can import you programmatically ics files?

    My work used MS Exchange, and I like meetings of export business of ics files so that I can import them into the calendar from Apple to get the recall of them on my iPhone. Sometimes I get too busy and forget to check my personal email in order to import the ics file. This has led to more than a missed session I get enough deep my job of writing code, systems architecture, etc. So and if well, sometimes it takes employee leave for the day to remind me that I have to go home for the day, too!

    Since my Mac at home is always online, I looked at using Dropbox/hazelnut instead of e-mail/applescript, but it seems that he is I have the same barrier - by program (i.e. non-interactively) import the ics file. I found snippets of Applescript that can work with some adjustments. The below a runs until the calendar app opens asking to specify the name of the calendar to import the event in. I need to manually answer the guest with cancel/ok right here. I change the calendar name setting window title parameter 'Add' and default home', but it's still stuck there.

    dupCalName the value «»

    the value path (path to the office as text) & "Personal.ics".

    Tell application id "com.apple.iCal '.

    activate

    -Get the name of the application (probably 'iCal' or 'Calendar') for the GUI Scripting later.
    Set iCalName to its name

    -Since it is possible for more than one calendar to have the same name, the idea of the repeat loop is better than the simple name here references. But that one loop is necessary in this part of the script.
    Repeat with i from 1 to the count of calendars

    Set thisCalendar to i - calendar Gets an id to the calendar reference.
    If (thisCalendar name is 'Personal') then

    Set dupCalName to "Personal".

    Set replacementName to "Personal (old).

    Set the name to thisCalendar to replacementName

    else if (thisCalendar is "Personal 2") then

    Set dupCalName 'personal 2 '.

    Set replacementName 'personal 2 (old) '.

    Set the name to thisCalendar to replacementName

    end if

    end repeat

    tell the end

    delay 1

    -"Double click" the file, because the Calendar iCal/s 'open' does not work in future versions.
    Tell application "Finder" to open the file path

    Tell application "system events".

    say iCalName of process

    -Hedge bets on the name of the window "Add an event" or "add events".
    say (first window whose title begins with 'Add event')

    Repeat until (if it exists)

    delay of 0.2

    end repeat

    Click on the popup button 1

    Repeat until (menu 1 pop up button 1 exists)

    delay of 0.2

    end repeat

    Click on the menu "new calendar" menu 1 pop button 1 up

    Repeat everything in (menu 1 pop up button 1 exists)

    delay of 0.2

    end repeat

    Click on the OK"" button.

    tell the end

    tell the end

    tell the end

    -check if a 2 personal exist after the new iCal import and change its name
    Tell application id "com.apple.iCal '.

    activate

    Repeat with i from 1 to the count of calendars

    thisCalendar Set of calendar I have

    If (thisCalendar name) is "Personal 2" then

    Set the name to thisCalendar to "Personal".

    output of repetition

    end if

    end repeat

    tell the end

    Tell application "SystemUIServer".

    activate

    If dupCalName is not "" then the screen of dialogue "Found an existing calendar named" & dupCalName & ".". It was renamed "& replacementName &". "buttons {"OK"} default to the 'OK' button with icon 2.

    tell the end

    I found importing ics files was something that I forgot to do it manually, so I came with a Hazel rule that uses the Apple script to automate it.

    My Hazel applies to my Dropbox to 'follow' folder and my download folder. the ICS work/other files will happen through Dropbox, and those of my macbook, where the rule is executed, are saved in the folder downloads.

    Hazel detects the ics file, run the applescript and finally moves the file to the trash folder. The script has reliably namely when the calendar app is done by importing the ics file, so I hardcoded a delay at the end of the script so far. Without the delay, Hazel will try to move the file before it has been imported. You will get an error message from the calendar app that it cannot process the file when this happens.  You may need to play late, if your system takes a long time to import the ics file.

    Use case:

    Many of my social networking sites allows you to export the events under ics file to import into your calendar. In addition, my employer uses MS Exchange to schedule meetings, and if you forward a meeting to your personal e-mail address, all in session sees. If instead, you export the ics meeting and import, your information is secure

    [code]

    property dittos: alias "Users:jgooch:Downloads:e1204988566180171.ics".

    -"Double click" the file, because the Calendar iCal/s 'open' does not work in future versions.

    Tell application id "com.apple.iCal '.

    activate

    -Get the name of the application (probably 'iCal' or 'Calendar') for the GUI Scripting later.

    Set iCalName to its name

    tell the end

    Tell application "Finder" to open the file dittos

    Tell application "system events".

    say iCalName of process

    -Hedge bets on the name of the window "Add an event" or "add events".

    say (first window whose title begins with 'Add event')

    Repeat until (if it exists)

    delay of 0.2

    end repeat

    Click on the OK"" button.

    tell the end

    tell the end

    tell the end

    delay 2

    Returns true

    [/ code]

    This works very well with Hazel and El Capitan.

  • Front panel locked, but not due to the structure of the event

    Hi it LV community.

    I did a staemachine program that executes an oscilloscope (screenshot of a provided below... the State of the problem). I ran my program yesterday and it worked very well. Then, like a model, a dialog box opens and I just clicked on it in a hurry. now my front hangs as soon as I move the above-mentioned State "the Oscilloscope settings.

    As indicated, I have go a repeat loop that collects successive impulses of my oscilloscope and displays on the front panel (it works fine). In parallel, I have a structure of the event that makes the tail for the real-time feedback of changes to parameters that I placed on the façade (exodus of state change).

    Here's the problem: as soon as I State 'Oscilloscope Settings' using a Boolean button on the front panel for get me there, the front hangs... No event triggered by this point, and even if it did, I already deselected the "Lock panel until the end of the matter for this event" checkbox in the case where the structure menu.

    So WHY is my front lock now? Thoughts anyone?

    Read the detailed help for event structures.

    He urged that a single event structure serve in a VI. There are moments where more can be used effectively, but caution and a thorough understanding of the structure are needed.

    The problem is that you have several structures of the event in the various cases of the state machine and they are set to respond to the same events.

    When the button Set Oscilloscope, the structures of the event in the purchase Menu and home screen States receive the event. The two lock the screen, but only one of these cases may work. It can transfer control to the State of the Oscilloscope settings, but the other event responding to this same event structure maintains the locked Panel.

    The solution is not not to release any of the event. The default value is usually the best setting. The best solution is to spend on an architecture of producer/consumer (events). Who uses two parallel loops. The producer has the one and the only structure of the event and passes orders to consumer loop through a queue.

    Probalby want as the mechanical action on the buttons to lock when you press. Put kiosks inside the respective case of event changed value and local variables becomes unnecessary.

    Lynn

  • Search event... but not quite!

    I was happy to see the search function of the event in 2015, but unless I'm missing something is only 50% complete!

    You can make a nice filter, but the result, your only option is a static value?  HUH?  Maybe I'm missing something, but this is ridiculous and incomplete. Why can't be real when set to true from the dialog entry entry?

    And although it looks like something like this is supported through the script, I ABSOLUTELY do not feel I should write a script for something like. You have to write a macro whenever you want to do a search/replace in your word processor?

    Sorry, but it just got to me, because I thought that it was an impressive novelty, spent my morning upgrade for him and then am horribly disappointed.

    -Scott

    Hi Scott,.

    The intention is that you can create a new string with the values 1 or 0 or 1 or NoValue values or other, then use the ANALYSIS "Multiply" function in the "Basic mathematics" palette to multiply this channel by your original channel.

    The main use case considered for the ChnEvent... functions () was to identify all ranges of line of several functions in a wide range of data, with a function call.  The previous approach with ChnFind() required repeated looping within a certain time calls.  Every time that you run either the 'event search' or 'Search event (free-form)' dialog boxes in the ANALYSIS, they automatically fill the global variable "ChnEventResultList" with an array of 2D line ranges, by the help documentation.  So you know immediately how many of these characteristics have been found and can easily loop over them.

    I like the idea of a special text like "InputValue" you could put in one of these fields, similar to "NoValue", which will automatically use the original value of the line.  Could you please send this request to the exchange of ideas DIAdem (ni.com/diademideas)?

    Brad Turpin

    Tiara Product Support Engineer

    National Instruments

  • PXI-6551 device data Underflow

    Hello.

    I have a module, PXI-6552.  I need to enter my DUT (ADC) out after a very long and very precise vector sequence.  And I want to loop through this sequence of more than 1 000 times (at the average of the results).

    The following script works:

    script ADCcapture
    generate marker0 of vecsetup (0)
    Repeat 1000
    generate marker0 of vecsample (424)
    end repeat
    end of script

    Here are the sizes of waveform for each wave listed:

    vecsetup = 280 cycles
    vecsample = 262 060 cycles

    My sample = 512 MB record length and the number of records to capture = 1 001

    The first marker in my script is my trigger start for my CQI. session.  The following markers are triggers of the advance.

    As I said, this example works, but the "vecsample" waveform is much smaller than it should be.  It should be 5 times as large, but I don't have a lot of memory.

    Fortunately, most of the 'vecsample' is a sequence repeatedly to keep living clocks (in my example above are just exhaustively written in the form of ongoing vectors).

    I know I can't nest, and I know now that I can't embed instructions more than 55 inside my finished loop (repeat 1000).

    Then, I tried to break my my 'vecsample' signal break up into 3 sections that I could "split the difference" between the size of memory limitations and the script of vector:

    script ADCcapture
    generate marker0 of vecsetup (0)
    Repeat 1000
    generate marker0 of vecsampleA (424)
    generate a vecsampleB
    generate a vecsampleB
    generate a vecsampleB
    ...  (Note: I have exactly 50 copies of 'generate vecsampleB')
    generate a vecsampleB
    generate a vecsampleB
    generate a vecsampleC
    end repeat
    end of script

    Here are the sizes of waveform for each wave listed:

    vecsetup = 280 cycles
    vecsampleA = 1 660 cycles
    vecsampleB = 4 884 cycles
    vecsampleC = 16 200 cycles

    vecsampleA contains unique things initially, including the previous sampling period output ADC.
    vecsampleB contains 1 221 best x of the model 4 time keep alive clock that I need.
    vecsampleC contains unique things at the end.

    Yet once, my record sample length = 512 and the number of records to capture = 1 001

    In the end, this generates the same number of cycles as the previous example:
    1 660 cycles 4 884 * 50 + 16 200 plus 262 060

    However, when I run this new script, I get an error:

    Exception detected
    Detail: [-1074115901] Windows error 0xBFFA4AC3
    Description of the DLL: DAQmx 200316 error has occurred:
    Measurements: Device data precision passing. The device was not able to move data quickly enough to deal with the frequency of sampling for the active script.

    Perform the operation at a lower sampling rate, or are looking for the following in the current script: markers can be too close together, waveforms is too small, wait may be too short or subsets may be too small. If you are using an external clock, the clock provided might have disappeared during your generation.

    State code:-200316

    Sorry for the long post.  Any help is very appreciated!
    Brian

    PS: I found the following topic regarding this issue, but it has not helped me to understand my mistake (as it seems that my markers and waveform sizes seem to be big enough):

    http://forums.NI.com/NI/board/message?board.ID=70&message.ID=10306

    Hello Brian,.

    I've recreated your problem on my side, thank you for the detailed description of your problem, it makes it much easier to understand what was going on.

    Although I'm still looking at the root cause of the problem, there seems to be a problem with the number of orders in the repeat loop. You need 2 less commands within the repeat loop. This can be demonstrated that the problem by moving two of orders outside the loop, keep the same number of lines in the script, but less than two lines in the loop to repeat itself.

    In your case I want to double the size of the vecSampleB and only run 25 times. This should allow you to start going forward.

    With regard to the underlying issue, when I find I'm going you know.

  • Support for Microsoft Math 3.0 product activation

    I had to rebuild my laptop girls step (again!), this time from scratch, reload Dell OEM Windows 7, Office 2007 and two days of updates.

    I also reinstalled MS Math 3.0 and entered the product key. (She of off back to College this weekend and needs calculation modules)

    Its now telling me that "..." Math has been activated the maximum number of times... "and"... Please contact a customer service representative... »

    I tried a "live chat" with a representative/engineer microsoft last night and they advised announces the question here

    can anyone help?

    brand

    Hi Mark,

    Sorry for the inconvenience caused to you.

    Please visit the link and try the steps.

    You are prompted repeatedly (looped) to reactivate Microsoft Math 3.0

    Answer if you need help with Windows, and we will be happy to help you.

  • Cleaning store policy

    Hello

    We have developed an application that writes binary data to a store of NoSql as LOB values (about 300 KB each).

    The data is first stored and read by another thread and finally deleted from the store.

    We see that the size of the store on the file system keeps growing and unused space is never released. In the course of a long ordeal, we have a complete file system!

    What is the policy of the cleanest threads? How can configure us the parameters of policy?

    The store is configured with replication factor = 3

    We tried to set the parameter "serviceLogFileLimit" but nothing has changed and storage has continued to grow over the configured limit...

    Thank you

    Giovanni

    We have developed an application that writes binary data to a store of NoSql as LOB values (about 300 KB each).

    The data is first stored and read by another thread and finally deleted from the store.

    We see that the size of the store on the file system keeps growing and unused space is never released. During a long test, we got a full file system!

    What is the policy of the cleanest threads? How can configure us the parameters of policy?

    The store is configured with replication factor = 3

    We tried to set the parameter "serviceLogFileLimit" but nothing has changed and storage has continued to grow over the configured limit...

    There are a least two uses unrelated to the word "log" in the system, and I think that serviceLogFileLimit is not related to one that's caused you problems here.

    The serviceLogFileLimit setting refers to store debug logging output files, that contain log entries with textual information on the events in the system, as the warning events that you mention.  These files are located in the subdirectory of the directory top level store log and have names like admin1_0.log or sn3_0.log.  This setting limits the maximum size of each of these files, which controls when the logging system switches to another log file.

    The log files, you are having issues with that are the files of newspapers I, what are the files that I use to store the changes made to the database.

    If you were really more space drive due to the recording of debug files, you probably would also change the 'serviceLogFileCount' parameter, which controls the number of copies of a given debug log file is maintained.  The default values of these parameters are serviceLogFileCount = 20 serviceLogFileLimit = 2 MB, for a total of 40 MB per set of log files.  There is a set of files by RN, admin and SN, as well as newspapers combined for the entire store.  To 40 MB for each of these sets, however, who only use it for storage.

    To add more details... log store is filled with warnings like this:

    2015-02-02 13:51:55.912 UTC WARNING [rg2 - rn3] I: vacuum cleaner 5 files not deleted because they are protected by replication.

    2015-02-02 13:51:55.925 UTC WARNING [rg2 - rn2] I: replication prevents deletion of 5 files by vacuum. Start the file = wedges to 0 x 0 CBVLSN 1, end file = 0 x 8 holds last VLSN 6 712

    As you say, these warnings mean that the files of newspapers I are selected for a reason any.

    The release of ping you provided confirms that replicas are caught up with their masters, because "sequence number" values are the same for all members of each burst.  If this isn't what causes the files to keep.

    We run another test which consisted of the following repeated looping: store a LOB, read it, delete it.

    Given the size of the LOB (300KB), this operating model will certainly generate a lot of log file data I.

    My guess is that the problem is related to the behavior of I which retains a minimum number fixed VLSNs.  There is an IC undocumented parameter that specifies the minimum number of VLSNs, which is by default 20000.

    With objects of 300 KB and 20000 VLSNs corresponding to about 10000 objects, i.e. about 3 GB of space dedicated to these VLSNs selected.

    I think it would be interesting to experiment with the reduction of the value of this setting to see if this results in the deleted log files.

    The name of the parameter I is:

    je.rep.minRetainedVLSNs

    It would be wise to try to reduce the value of its default value of 20000, say, 2000, which should decrease the minimum space held about 300 MB.

    The Administrator's guide provides information about the store settings:

    http://docs.Oracle.com/CD/NoSQL/HTML/AdminGuide/SetStoreParams.html

    You can set the value of a parameter I by changing the value of the replication node setting configProperties.

    You can check the default value of the parameter configProperties starting up of the CLI admin and doing:

    view the policy settings

    To check the value on a given RN, say rg1 - rn1, if the different nodes have different parameters, do:

    display settings-service rg1 - rn1

    Add the new parameter to the value of the existing setting.  For example, if you see:

    configProperties = foo 30; bar 22;

    You can use:

    configProperties = foo 30; bar 22; je.rep.minRetainedVLSNs 2000;

    Set the current value for all AI by:

    plan change-settings-all-rns-wait configProperties - params = "foo 30; bar 22; je.rep.minRetainedVLSNs 2000; »

    You must also change the default value by:

    change-policy - params configProperties = "foo 30; bar 22; je.rep.minRetainedVLSNs 2000; »

    If please give that a try and let us know if this solves the problem.

    -Tim

  • DW2015 El Capitan GPU Mac FREEZES

    Since the last update (and possibly in Photoshop as well) I can't use the CC products. Dreamweaver is to call a GPU and sending in the "death beach ball" slow down the computer to a crawl and force a reboot of the power button.  Terminal Server will work not only a stop and then I have to rebuild my flight at startup directory.

    10/05/16 11:25:54.370 AM WindowServer [271]: common_reenable_update: updates the user interface were eventually reactivated by application "Dreamweaver CC" after 14.41 seconds [0.07 fps] (server force reactivated their end of 1.00 seconds [1,00 fps])

    THE NEXT SECTION GOES INTO a REPEATABLE LOOP > > > > >

    10/05/16 11:30:31.000 AM kernel [0]: attempt to restart GPU (AMD over-pants D500)...

    10/05/16 11:30:42.005 AM DumpGPURestart [5061]: sauvΘs report gpuRestart kernel /Library/Logs/DiagnosticReports/Kernel_2016-05-10-113042_-Office.gpuRestart

    10/05/16 11:32:14.155 AM com.apple.xpc.launchd [1]: (com.apple.DumpGPURestart) Service worked only for 1 seconds. Push the respawn in 9 seconds.

    10/05/16 11:32:16.000 AM kernel [0]: [2:0:0] GPU HangState 0x00000000, 0 x HangFlags 00000004: IndividualEngineHang 0, NonEngineBlockHang 0, FenceNotRetired 1, PerEngineReset 0, FullAsicReset 1

    10/05/16 11:30:51.000 AM kernel [0]: 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000

    10/05/16 11:30:51.000 AM kernel [0]: 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 0xf0000000 < < < < THIS LINE REPEATS forever

    10/05/16 11:30:51.000 AM kernel [0]: HWRingDumpEnd

    10/05/16 11:31:31.000 AM kernel [0]: attempt to restart GPU (AMD over-pants D500)...

    I'm ready to go back to CS6 for good I'm so frustrated. I cleaned, reinstalled, cleaned and reinstalled. Problem persists.

    The problem has been resolved with Apple recall and replacement cards over-pants AMD 500 GPU on Mac Pro 2013

  • [AS] Help: Change the text in overflow &lt; text frame &gt;?

    Hello again,

    I am filling the blocks of text in my document with a randomtext in a table. Works fine now.

    But not knowing how many characters compatible with, in the text box, which has space for only one line, about 10 words, I'll try not to repeat the random process until that theres no overflow the box.

    The problem is this: when I edit text in the text block and it overflows, evil change the new text - but only the visible text gets crushed, leaving the rest overflowing in the box and keeps adding up and never ends the repeat loop.

    if class of myPageItem as String = "text frame" then

                          set text of myPageItem to «"& my TextFill()»»

                        repeat until overflows of myPageItem = false

    the value text of myPageItem to «"& my TextFill()»»

    end Repeat

    end if


    Its the thing with the text in the text frame... How to crush each text visible and not visible in the box, any suggestions?

    It does not work. What we have here is a failure to communicate. Here are the main points in javascript:

    myTextFrame = app.selection [0]; I chose a block of text with the type tool, drag

    myTextFrame.contents; the words that are part of the framework

    myTextFrame.parentStory.contents; the entire contents of the story, including everything in excess

    myTextFrame.overflows; true

    Make sure myTextFrame is a reference to an object in the image text.

Maybe you are looking for