a replacement lcd will set a screen with a gray screen or a screen that has lines

Similar Questions

• Why my iPad opens with a screen that has a volume on that instead of my desktop bar?

  I have updates, but suddenly today, when I turn on my iPad it opens to a screen that has a Volume on it control bar.  Where this come from and how do I get rid of him?

  

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything. It opens like this when you play something.

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down. How can I get rid of him?

  Original title: appearance of office.

  There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down.  How can I get rid of him?

  Use according to the following seems easier for you (hint: the first link is exactly the same as "Method B" to the second link):

  http://www.dougknox.com/XP/scripts_desc/xp_commtask_desktop.htm

  http://www.askvg.com/how-to-remove-annoying-common-tasks-from-desktop-in-Windows-XP/

• How to recover a television screen that has been moved out of view of the Office

  By chance I moved to small off the screen size tv screen.  I can see the TV display full size, but when it is checked it does not appear on the screen.

  Hi J Ayers,
   
  -What exactly do you mean by "reduced tv display size off the screen? Please explain the same thing to help us help you better.
   
  Try to change the resolution of the screen (reduce) and check if it helps.
   
  See this link for more on this topic:
   
  To change your screen resolution
   
  In addition, see:
   
  Customization of your computer for multiple monitors
   
  After return with more information pertaining to the matter for us help to help you better.

• Vertical scroll bar on a screen that has no assets.

  Hello

  I have a data grid only display on my screen. Table cells don't have any accent.  As the table may have more lines that it can fit on the screen, I want to show a vertical scroll bar that would scroll of the page by page.  Is it possible to do?

  Thank you.

  manager.add(new NullField(NullField.FOCUSABLE));
  

  It is up to you to know where to place them for optimal scrolling.

• I lost my taskbar at the top of my screen that has file, prints, save, etc.

  I can't understand what has happened to the taskbar on my tabs and how to recover.

  Press Alt to have appear, or right-click on the right-hand side of the Strip to tabs and select menu bar, to have her show all the time.

• If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files?

  If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?

  Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.

  This has been answered before, if you do a search for "key recovery" it appears among the first results.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/will-i-lose-my-files-if-i-do-one-key-recove...

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

• CHKDSK replaced the security id not valid with default security id & showed a black screen with the mouse cursor

  Hi you

  After running CHKDSK, it said replacement of the security id invalid with the default security id in windows 7 64 bit

  After that it's over, he just showed a black screen with the mobile mouse cursor!

  I searched but did not find the answers on Microsoft

  Please help me

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  Check the drive run at Windows startup?

  Thank you for details on the issue.

  This message is displayed because the specified file has an invalid security ID. Each file on a NTFS or FAT volume has security what ID assigned. The ID assigned to the data file does not match the ID assigned to the security data stream file ($SDS). There is a mismatch of Ids. CHKDSK replaced the invalid security ID.

  Black screen with cursor may appear due to corrupted display driver.

  I suggest you try using the steps described in this article and check.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• When I click on an e-mail link in Firefox, I get a message in the left corner of my screen that says "mail to: email address. Outlook will not open upward as it does in Internet Explorer. I set Outlook as my default email in Windows 7.

  When I click on an e-mail link in Firefox, I get a message in the left corner of my screen that says "mail to: email address. Outlook opens automatically as it does in Internet Explorer. I did my default email in Outlook in Windows 7.

  This has happened

  Each time Firefox opened

  Is when I upgraded to Windows 7.

  See this:
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+...

• The viewer PDF Firefox renders shadows created in Adobe InDesign. He replaces it with a gray flat area.

  The new Firefox integrated PDF viewer will not render gradients-shadows created in Adobe InDesign. He replaces it with a gray flat area - any shape he's sitting behind. Y at - it a fix for this problem?

  The current versions of Firefox have allowed a built-in PDF Viewer that has all of the features that other PDF as Adobe Reader readers have or can not work properly otherwise.

  You can change the action for Portable Document Format (PDF) to Preview in Firefox to use Adobe Reader software or set always ask in "Firefox > Preferences > Applications.

  You can set the pref pdfjs.disabled true on the topic: config page to disable the build-in the PDF Viewer.

  See also:

  • https://support.Mozilla.org/KB/view-PDF-files-Firefox-without-downloading-them

• Since version 18.0.0, Firefox regularly replace some parts of my screen when it is enlarged but not active (Outlook or Word); is there any solution for this?

  Any time I can get Firefox enlarged but not active (so it is behind another active window / application) on Windows XP Pro SP3, it regularly replace significant portions of my screen. If I move the mouse, type, scroll up/down or anything to change the screen, the active application is slowly starting to appear. For example, in Office 2007, when this happens, I can continue typing a sentence in Word or Outlook and this line is displayed, but the rest of the message area displays remnants of Firefox. If I move the mouse along the Ribbon of Office, it will be displayed in pieces are the reached mouse. This problem has been held regularly since the version 18.0.0 and persists in 18.0.1. I prefer not to minimize Firefox so I can move conveniently via Alt - Tab from Firefox and the other application, in that I work, but this problem that is almost impossible. FYI, when I'm in Firefox, no other pop application on top, not other applications show otherwise, so I know that the problem is caused by Firefox and/or interaction weird with the new version and installed plugins, drivers or other software.

  Could you try to disable graphics hardware acceleration? (I have trouble determining your "more system information" if it is enabled or disabled). As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

• Equium U400/146 - I need a replacement lcd cable/Ribbon

  Hello
  Please help I have searched for days.
  I need a replacement lcd cable/Ribbon. Identification number (DDOBU2LC000)

  My laptop is Toshiba Equium U400/146 PSU42E-00400SKS model number. Sound off out of warranty, so I took it to
  my local repair shop, but they could not get the part. The problem with the LCD is that it starts in green
  I can still use the programs, the grays and whites shine through.

  When it is connected to a crt monitor, the laptop is fine. Return to the cable, the screen number is REC-NI3311-LOL. C1

  If someone could point me in the right direction for this part, I would be most gratefull

  Thank you

  Hello

  All laptop parts can be ordered from the local ASP (certified partner).
  I think that guys should be able to order this cable/Ribbon.

  Here you can find the database with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  Good luck

• What resolution should I set my screen before I connect to my TV...

  Ive tried mostve them and one of them I saw on TV (it's a screen samsung 69 inches 1080 p tv... and I know it works because ive connected before, but I forgot what to do to make it work), but when I connect it, it is upwards in Mode not supported... help please? I hate to play m games on this * fat dell monitor... (excuse my ASP) and I have a windows vista

  Hello

  Method 1: To connect your computer to a television, your computer must have a video port that matches one of the inputs on your TV.

  If your TV does not have a VGA or DVI input that matches an output on your computer, you'll need to use cables S-video or composite video.

  If your computer does not have one of these TV-compatible outputs, then you might be able to install a new video card that has the right connection.

  You will need an HDMI cable to connect TV with laptop.

  Follow these steps to connect your computer to your TV:

  1. turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.
  2. connect the video cable from your computer's output to your TV.
  3. turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.
  4 turn on your computer.

  You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably have to adjust the screen
  resolution in Windows.

  Method 2: If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Hope this information is useful.