A satellite - cannot use the webcam - in use by another program?

Similar Questions

• C855 satellite - cannot install the webcam software

  Hello

  yesterday, I uninstall my webcam TOSHIBA HD because it does not work and now I can not re installed it, and I have no camera on my laptop.

  How can I install the "TOSHIBA Web Camera HD?

  Thanks for the reply

  Livio

  > How can I install the "TOSHIBA Web Camera HD?

  There is no magic installation procedure.
  Just download the Toshiba webcam software, unzip the and run the exe file.
  All that s.

  If this does not work, your webcam module may be defective.

  You can see a webcam in Device Manager? He listed as a devie marked yellow exclamation or unknown?

  Also check the settings in the BIOS (BIOS-> advanced-> configuration of the system) if the webcam is enabled.

• Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Minnie3,

  You may need to change the default program that opens the images.
  Take a look at the following link for more information: http://windows.microsoft.com/en-us/windows-vista/Change-which-programs-Windows-uses-by-default
  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• webcam Phillips SPZ2000 used by another program

  Webcam Phillips SPZ2000 when used with Skype works great after finishing a conversation or a call on the small light camera lights. After I put the camsuite to try to disable it says that the webcam is used by another program, please help thanks a lot a lot.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you cannot disable the webcam after using it.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  This problem can occur because drivers damaged or incompatible, lack of updates, the incorrect device settings or hardware problems.

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  If the problem persists, I suggest to uninstall and reinstall the latest version of the driver for the webcam on the manufacturer's Web site.

  Check out the link:

  http://www.P4C.Philips.com/cgi-bin/cpindex.pl?CTN=SPZ2000/00&HLT=Link_Software&mid=Link_Software&scy=us&SLG=AEN

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the webcam, I'll be happy to help you. We, at tender Microsoft to excellence.

• HP Pavilion notebook dx6500 webcam does not say should be used in another program.

  Original title: web cam a malfunction.

  I have a pavillion dx6500 laptop with a webcam integrated.  When I go on Windows live messenger or Skype, she said that my webcam does not work and should be used in another program.  Does anyone know a simple solution?  It's frustrating.  Thank you.

  Hi judyhawthorne,

  1 how long have you been faced with this problem?

  2. have you done any hardware changes or software on your computer before this problem?

  3. what operating system is installed on your computer?

  You can set up your computer in a clean boot state, and check if the problem persists. It will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Reference: Using the Webcam with the Internet e-mail software

  Free chat: use instant messaging and webcam to stay in touch

  Hope the helps of information.

• Organizer of Photoshop: The catalog could not be opened because it is currently in use by another program

  Original title: Louise

  I think I can cut my computor while organizing photoshop was running. Now when I try to open an icon appears on the bar tasks with a noise of error. I can fly over the icon and it shows me my photos but I can't open, all I can do is to close. It was suggested to go to Task Manager and shut up there and the first time I tried this he showed that run and I closed it down. But I still can't open it and it shows is no longer in the Task Manager. I got a message

  The catalog cannot be opened because it is currently in use by another program.
  I tried the system restore to a time before this glitch.
  I have uninstalled and installed the program.
  How can I find where it runs when I can't find it in the Task Manager?

  Hello

  I suggest you to send your query to the Adobe community forum as they would be in a better position to help you with this question.
  http://forums.Adobe.com/index.jspa
  https://helpx.Adobe.com/Photoshop-elements.html

  Thank you

• "The player (disc / E :) is used by another program)" Nope.

  "I was about to burn a few cases hidden information sensitive on a CD - R, but initial development right after disk shaped, I suddenly have an alert pop up telling me that the disk drive" is used by another program. "Well, it does not seem, on the surface, and certainly not through any action on my part I W - Vista HP SP-2, with MS Secur. Active essentials, running behind the firewall of the router to a little ordinary. I haven't used the drive E: to what it is today since bringing my laptop from hibernation. There's zilch other clients on this network, as me, home. I've never seen this before alert when using the operation and common sense of burning Windows CD told me to be careful, even if MSSec. Essen. report something when I specifically disk for malware analysis, but I don't know what it is are limits.  Please help, thanks in advance!

  Hello

  You have installed any other software burning CD on your computer?

  If so, then uninstall the software and check if it makes a difference.

  In addition, perform a clean boot to verify if a third party application or service that runs in the background is in conflict with the burning process.

  Refer to this article for more information on the clean boot.
  http://support.Microsoft.com/kb/929135

  NOTE: Please check that you start the computer in normal mode after a repair. Followstep 7 of the above article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• message: 0X80071A90 of the file in use by another program. When I try to back up to an external drive

  I get an error message saying that the 0X80071A90 file is used by another program when trying to make a backup using windows backup installation, anyone got any idea how to get around this please.

  Hello Chris,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, by making a backup of Windows. In the meantime, please try to follow the following suggestions to solve the problem.

  You can try putting your computer clean boot state, and then try to perform a backup and see if that helps. Follow the link below to get you computer in a clean boot state, because your system in a clean boot state allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  If that doesn't help then try to find the bad sectors on the hard disk and then perform a backup, see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right click on cmd and click run as administrator

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to save and check the result.

  Visit this link for more information on "check a drive for errors":

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• LR3 cannot open, said currently in use by another program?

  Hi - I used LR3 successfully, but I tried to open one a few days ago and I get a dialog indicating that it is in use by another program. My Task Manager shows no other programs running. The options in the dialogue keep me going in circles. I have tried connected and not connected to the Internet, and without difference. I tried to uninstall LR 3 and still get the dialog box. Any suggestions anyone at - it a solution please...? My operating system is Vista.  Thank you. Terry

  LR by default creates a subfolder in your pictures folder called Lightroom and stores your catalog, previews, LR preferences and others. While you have open LR it also creates a file called "Lightroom3 Catalog.lrcat.lock". This is to ensure that no other users can access the catalog while it is in use.

  When LR is closed the file *.lock is retired, however if LR is not closed properly the files of the *.lock downwards remains and LR stop it from sliding.

  With closed LR check your "pictures > lightroom folder and see if a *.lock file is present and delete the file.»

  Then try to open LR.

• Satellite L755-128 "webcam is locked by another program."

  I bought this phone today and wanted to use the webcam, there is a program called Web Camera Application, which is what the seller showed me earlier on the show one.
  When I click the program it comes up with 'webcam is locked by another program' it won't work on Skype or facial recognition, no more.

  Any ideas?

  Hello

  Cam is properly registered in (imaging device) Device Manager?
  Released new webcam application and check the video settings in Skype. Webcam is listed here? You can use cam with Skype?

  Also try reinstalling the webcam application. Latest version, that you can find on Toshiba download page ling is on the top of this page (top of page support pages download drivers).

• Service Pack 3 update fails error file ntkrnlpa.exe is open or in use by another program

  Original title: Service Pack 3 update fails

  I'm trying to update windows xp with service pack 3. I have download the update. When I try to install, the update fails with an error message"
  "File ntkrnlpa.exe is open or in use by another program", when no programs are running... Why?, he said.

  My stops to update SP3 and I cannot resolve the error message, how can I fix it?

  Hello
  Try the methods provided below and check if the problem persists.
  Method 1:
  This problem may occur if some third party software interferes with the installation of Windows XP SP3.
  Click on the link provided below for more information on how to set up your computer in a clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  (a) click Start and then click Run.
  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK. When you are prompted, click on restart to restart the computer.
   
  Method 2:
  
  Download the update manually, and then install it.
   
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  
  http://www.Microsoft.com/download/en/details.aspx?ID=24
  See also:
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   

• Try to remove a CD image file, get the error message "this action cannot be completed because the file is open in another program.

  I am trying to remove a file from CD image (.img) of my office

  When I try to put it in the bin I get the message

  "The action cannot be completed because the file is open in another program close the file, and then try again"

  First, I checked the obvious things like if the .img file was mounted in a virtual drive - it isn't so I then used LockHunter to find which application is using the file so I can close by the Task Manager.

  Unfortunately LockHunter told me that the file is used by 'System' - which cannot be closed through the TM.

  Any help?

  The problem is that the program that allows you to mount the image always uses the image.  In my case I used the magical disc. Go to the start menu find the magic disk or folder folder, there should be an option to uninstall the magic disc. I tried UN-installing conrtol add and remove programs but it wouldn't let me. You can also click on computer in Start menu and see if the file you want to remove is always mounted (appears as a CD image). In this case that you can click the eject disc hit.

• This action cannot be completed because the file is open in another program

  Hello

  I tried to check other one but mine is a little different as I don't want to delete the file.

  Here is what happened:

  I downloaded the videos that I like from MediaFire. After I downloaded I tried to change the name and change the location of the file to download foldedr in a different folder.

  Well that the file has not been opened, has been already finished downloaded & I wasn't even watching it, I can't change the name or move. Whenever I tried, my phone keep saying "cannot perform this action because the file is open in another program"

  He arrived only file file but 3 or more I downloaded. What should I do? I just want to change the name and move it to another folder. I am the administrator & the only one using the laptop.

  Thank you for your attention
  

  Hi KezhiaChan,

  Step 1: Start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the advanced startup options select Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Try to rename or move the file and check

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

• The Action cannot be performed because the file is open in another program

  I get an error after a few seconds of trying to move several files from my PC Win 7 for Mac OS Maverick, that there is a file already in the destination on Mac. This is true, but it was just put there because I copy over to the same action.  It reads 0Kb and wasn't there until I started.  Then I get an error: the Action cannot be performed because the file is open in another program.  Close the folder or file, and then try again...

  If I click on it a bunch of hold or wait, it takes about 45 seconds. I have to do with all the files, and it occurs when copying from PC to Mac.  PC-to-PC was never a problem.  I even rebooted both computers, so nothing is using all the files.  If I copy a file at a time, I get no error.

  So, I have a single file to not move, no problem.  If move 5 files, the first is fine, but it presents all 5 files in the folder at a time.  All the other files that the first show 0kb. I get the already existing for the error file, and select move and replace.  Can I get the Action cannot be performed because the file is open in another program.  I wait or click several times until it starts to move the file.  This file tells something then other than 0 kb.  When it's done, the error process starts all over.  In Mac, nobody seems to have any idea.

  Hello Ephraim,

  Please update us with the State of the question.

  I suggest posting your issue in our forum TechnNet.

  TechnNet forums that may help you better on this issue. Please follow the link below and post your concern on TechnNet.

  https://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro&filter=AllTypes&sort=lastpostdesc

  Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.