A satellite crashes during installation of XP after replacing HARD drive


I'm trying to install a new hard drive, I boot from a CD of XP.
Everything goes well until the moment when the system reads "Windows starts now" and then my laptop crashes.

What I am doing wrong?



First question; What model of laptop do you have exactly?
Second question; New HARD drive is recognized in the BIOS?

If you have a series of laptop latest then you should check if the SATA in the BIOS mode was changed to compatible.
You can install the operating system without previous SATA driver installation.

Tags: Toshiba

Similar Questions

  • Satellite C670D-109 - installation of recovery after replacing HARD drive image


    I have a problem to restore my laptop.
    My hard drive is not working, I do not have the recovery disks, but I managed to save the HDD Recovery folder in a partition of DATA.

    Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?

    > Once installed the new hard drive, it is possible to recover my original without the cd, but with a pen drive usb installation?
    Unfortunately, you will not be able to start the recovery image installation. The data saved on unusable USB on this path. It must be the startup created by Toshiba recovery disc creator device
    You can only install recovery image using the recovery disk.

    If you n t have it you can order a new one.

  • Satellite L300 - cannot install Microsoft updates after replacing HARD drive

    I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

    Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
    Then I borrowed a 160 GB of work and went through the same process and everything works fine.

    To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

    > ... Standalone Vista SP2 I downloaded will not be installed
    Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

    Let the system to install all the updates and don t force the installation of some own downloaded stuff.
    Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

  • Satellite L300D-242 - cannot install Vista after replacing HARD drive

    Hi wonder if anyone can help mei have a L300D_242 toshiba satellite that broke down and I bought a new hard drive for it because the original was not good.

    I tried to install a Vista premium 32 bit on the new hard drive, but it does not install until the 4th stage and then stops or hangs until he finishes.

    Does anyone know how to install a new hard drive and windows on this laptop?

    Thank you


    What Vista did you use? TOSHIBA recovery disk or a disk of Microsoft Vista?
    Format you the new HARD disk before starting the installation of Vista?

    It is possible that the new HARD drive is not good and therefore the system can not be installed properly
    You can check the drive HARD using a tool called Drive Fitness Test download this as its a freeware program and test your HARD drive.

  • Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

    Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

    Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

    To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

  • Satellite Pro A10 (PSA15E) - no card after replacing HARD drive wireless network


    just a spare hard drive was fitted by an expert, all drivers and update of the BIOS installed on the site of Toshiba, but my wireless network card does not work.
    When I try to connect via a router it says that the card is disconnected?

    I went into Device Manager and of what follows is listed under devices Details ld:
    PCI\VEN_10B7 & DEV_6001 & SUBSYS_600110B7 & REV_01\5 & 36 D 029F7 & 0058F0

    Can someone please tell me which card is installed and where / how do get me to it.
    I don't understand how it can be unplugged?

    I use a 3com officeconnect wireless 11g PC Card which works fine until the hard drive failed.

    Help, please... I am due to go to the hospital Monday and I wish I could take it with me.

    Thank you


    Sorry if I write this too late. :(

    He's old enough for laptop and I don't know with certainty what is the card inside, but all notebooks with wireless network inside card have a small stick of Wi - Fi at the bottom with number of WLAN card. Using this number in Google, you can identify the card.

    Anyway, there is not a lot of possibilities because on the Toshiba support page there are two WLAN drivers listed for your model of laptop. Try to install both of them. One of them must be good.

    Good luck!

  • Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

    I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
    So, how can I put the o/s back on?

    Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
    But I've never tried this procedure and don t know if it will work.

    But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
    After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

  • Satellite 1410 714 extremely slow after replacing HARD drive


    I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

    I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

    Thanks for help.



    I can t think the motherboard is broken after replacing HARD drive.
    I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
    Please check site driver Toshiba for the latest version of BIOS.

    Have you used any anties Virus applications?

  • HP Pavilion 17: mouse pad does not work after replacing hard drive


    After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

    I installed the Synaptics driver but it didn't help.

    How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

    USB mouse works fine.

    See you soon

    The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

  • After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

    Original title: dvd player

    recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

    Duplicate the content of the thread:

    After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

    My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?


    You can check these links and try...



  • Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

    I had a HARD drive error.

    So I formatted the hard drive (after trying for months to get the process to finally finish that)
    Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

    I searched the net and found nothing of use!
    Help, please

    see you soon


    You need to create the own recovery in the past disc!
    This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

    In case you have not created this disk, it is possible to order this support:

  • Satellite A50 - message from system disk insert after replacing HARD drive


    I have an old A50 and the HARD drive comes with it's very slow and cracking now, so I'm trying to replace it with a new HDD - Hitachi travelstar 7200 RPM of 60 GB, with ATA interface.

    I took the old HDD and put the new, then on A50 and press F12, and then insert the CD recovery and restored (installation) everything on the new HARD drive. Once it's done, I rebooted A50, but what I got is then a black screen with the message "Insert system disk..." Does anyone know what I did wrong? I got tired of it several times, but I got the same results...

    Thank you.

    I think that Akuma is right.

    On FAT32 and Windows 98 should define the active partition, and then it should work.
    Then download a MS-DOS boot disk and burn it to a CD as Akuma has suggested. I tried it and it works :)
    It is quite easy with Nero.

    Good luck!

  • Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    Original title: Windows Update

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

  • Satellite U940 - Random BSOD after replacing HARD drive

    Good day ladies and gentlemen!

    I was wondering if I can win some lights here - as I google myself in a bunch of flange on the issue, I have!

    I am a famous computer technician (modest too) and more recently, a client of mine introduced me to a ultrabook Satellite U940 - lovingly with the SSD / HDD Raid 0 configuration running our beloved Windows 8.

    All things according to their entire course - Hitachi hard drive failed (as google tells me is to be expected).

    So, I replace the hard drive by a great little number Western Digital, cloned from Hitachi, sector by sector, and after a significant cajoling with bcdedit and bootrec amount, I could so he could begin our good liked Windows 8.

    However, since then, I have random BSOD, cold boots failed and all sorts of errors.

    I ran all the regular patches - SFC/scannow, chkdsk/r, Windows 8 repair facilities, etc., but it is still volatile jolly.

    Things seem not to be as they were with this Satellite little ol '-before any repair, the peripheral device manager showed two "RAID 0' in the category of hard drives, and since then it shows the individual SSD and the WD HARD drive."

    I've updated the driver for the Intel Rapid Storage at latest on the Toshiba site, but nothing helps - alas!
    The weird part is that if I do a reboot on this little beauty, she starts without any problems, but a start cold after a power off is a completely different question - dummy - spit crashing, dumping, in general!

    If there is a troubleshooting there champion who can destroy my help in this situation, I'd be very impressed and never have if they could provide assistance in this regard.

    Unfortunately Microsoft - are we are all end by using these products of ever-so-pretty Appl?


    I read in some discussions here in this forum only after replacing the disk SSD or HARD drive, the RAID configuration is lost and must be rebuilt on a device Windows 8.

    But this can be done very easily, and this can be corrected by an authorized Toshiba because this procedure requires special tools and utilities.

    Unfortunately, it seems to me that you will need to contact the ASP in your country to get this problem resolved :(

  • satellite 2520cdt is very slow after replacing HARD drive

    My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
    I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.

    I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.

    Is there a solution?


    I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
    However, try to defragment the HARD drive.

Maybe you are looking for

  • Webcam on Toshiba Satellite U300 - 14 k Linux Mint 8 Helena

    Hello I have a Toshiba Satellite u300 14-k with Linux Mint 8 Helena - main edition.I just have my bluetooth build-in to work and now I want to have the build-in webcam and microphone to work. Someone who can help me through this? / Jajjax

  • Liquid fell on my Satellite M30x - now it does not start

    Hey there, yesterday, some orange juice fell on the side of my toshiba M30X laptop.Immediately, he came out. I manipulated the laptop carefully, she held so that some of the juice could go out again, then I tried to dry near the heating. Now: there's

  • colors look not smooth on my Droid X 2

    My droid X 2 shows colors in gradient type, but the same picture looks super smooth on my laptop, I don't understand, it's the phone supports 8 bits of color or my phone is defective.

  • HP Jet Key Windows 7

    I installed the Windows 10 Insider overview to my HP Jet 7 from a USB key. When the RTM has been released, I also installed it from a USB key. 10 Windows RTM requires a key (the preview of the Insider has never made). I obviously don't have a Windows

  • Windows problem _ update