A satellite - not enough video memory for DVD player

Similar Questions

• 12 GB of RAM is "not enough physical memory" for a 2-GB virtual Machine?

  I run VMware Player 6.0.3 on Windows 64-bit 8.1. My host has 12 GB of physical memory and my virtual machine uses 2 GB memory. And yet, I can't start my VM because VMware has said "not enough physical memory is available to power on this virtual machine with its configured settings".

  According to the Windows Task Manager, only 15% of my physical memory is reserved for the current enforcement process. So, how is it possible that I don't have enough RAM to run my virtual machine?

  This is a known issue!  Take a look at: (workaround in) Re: 8.1 Windows October rollup KB2995388 and problem with 10 Workstation

  Also take a look at: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation & Microsoft Patchday's and ' not enough physical memory is available to power on this virtual machine " & 14 October patches for WIndows 64 bit 8.1 breaks VMWare player 6.03

• Portege R500 error reading DVD - not enough video memory

  I tried to fix this by trying other decoders and also reinstalled WinDVD.
  I also thought that maybe the dynamic video memory technology is problems while I reinstalled the Intel gfx driver.

  Is there something I can do to check if the dynamics of the video memory is working as it should?
  Any other ideas?

  Thank you...

  Hello

  I think that this has nothing to do with the available memory or graphics card
  What operating system do you use?

  Have you installed all the drivers available from the European pilot of Toshiba page?

  What the use of the different actors?
  I m using free VLC player. You can play almost all the files. It s small and free.

  Take a look in google and check it out!

• Not enough (RAM) memory free to start treatment for Outlook services

  When I run Outlook 2007 SP2 and after getting my new one e-mail a notice appears of the outlook on the outlook bar icon to say tasks cannot start treatment services because there is not enough free memory to run this program (and it I do not see my new email). I added 2 GB of RAM and now have 6 GB in my Dell XPS 420 desktop computer. It has no effect on the error message. I'm running the 32-bit version of Windows Vista Ultimate SP2. In the physical memory in task manager, I show about 3100 MB in total, 1500 cache and 0 free. Don't know why the total would not be about 6 GB which is what is installed. What can I do to manage the memory or any other suggestions for the prospects for a return to normal?

  It turns out that the problem was with Outlook and not related to the memery computer. It was solved by going to features, programs and Control Panel, and then repair Microsoft office system 2007.  Thank you for all your help.

  Hello

  32-bit Edition of Windows Vista has a limit of 4 GB memory. If you have installed more than 4 GB, Vista will not read the extra memory.

  The question you have posted is related to Outlook and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

• Add video memory for Pavilion a410e

  I have an old HP Pavilion a410e Tower (2.07 GHz AMD Athlon XP) running Windows XP Home Edition which I want to connect to my HDTV to stream internet video. When I start the program, Boxee, I get a message that I have<128 mb="" video="" memory.="" is="" there="" a="" simple="" (i.e.,="" easy="" and="" fairly="" inexpensive)="" way="" to="" increase="" the="" video="" memory="" for="" this="" use?="">

  dkayw wrote:
  

  The max that I can choose is 64 MB, what is the difference between PCI and AGP video cards? It would be better for the HDTV display and work better with limited system memory? Thanks, Deb

  Deb, AGP is a newer technology and is considerably faster than the PCI ports.  So I suggest an AGP video card.  Now, that being said, I am not sure how well the computer will run with an HDTV because HP supports only 1 GB of system memory.  Additionally, make sure that the power supply unit (PSU) has enough power to run the card you choose correctly.  You can check the wattage in opening the case and by reading the label on the power supply.  The minimum power requirements should be available on the manufacturer's website.

• Not enough free memory

  Hi, I have the same problem, unfortunately, your solution does not work, when I paste the code at the command prompt, an error has occurred, and of course I started the administrator command prompt...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/there-is-not-enough-free-memory-to-run-this/815fcc17-B5A5-4468-98c7-94d1ba3e5b3c?page=1 RelanAlex said they have tried the solutions and are still having problems. >

  Hi all, thanks for the reply I appreciate (I write a long solution is a pain more describe a problem), but I take the option reinstall my windows so I don't mind more, and now everything is back to normal, again, of course I lost most of my work, the software and the etc T_T I have ever had the chance to backup. I learned my mistake and I never mess with registry thing again.

  Once again thanks for the help and good day.

• VMware Workstation 10 - not enough physical memory...

  So, I'm aware of the Windows KB2995388 8.1 update that causes this problem:

  Not enough physical memory is available to power on this virtual machine with its configured settings. To solve this problem, decrease the size of the memory of this virtual machine at 460 MB, increase the amount of physical memory for all the virtual machines to 3296 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap. It is possible that native and/or services applications have locked memory which could help launch the virtual machine. Close unnecessary applications or services can free up enough memory to start this virtual machine. If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  but after upgrading my OS today I have the same symptoms and can't find installed KB2995388.

  I tried running VMware Workstation as an administrator with no luck either.

  Y at - it no alternative workaround, or is there an another Windows update that can cause this problem?

  Thanks for any help and advice.

  Yes, other updates can cause the same issue, because the change that was made in KB2995388 was incorporated in to many other more recent updates as well.

  What version of Workstation do you run?  If you run Workstation 10.0.4 or newer on Windows 8.1, this should no longer be a problem.

  --

  Darius

• After the crash of the system, Workstation 10 reports "not enough physical memory is available" - how to fix?

  On a Windows Pro 8.1 with 32 GB memory main system, I was running three virtual machines on 10 workstation.  Then we had a power failure and the system crashed.  Once the power was back and I restarted, any attempt to run a virtual machine failed with the following (change numbers) message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To solve this problem, decrease the size of this virtual machine to 988 MB memory, increase the amount of physical memory for all the virtual machines to 1219 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap.

  This occurs if the virtual computer, I try to start is one of those that was going or who was not working at the time of the accident.  In this case if I am as an administrator or not.

  I checked Edit/Preferences/memory, and reserved memory is set to 24480 MB - 24 GB.  Can I run a virtual machine if I set the memory size to below the value indicated in the message (in this case, 988 MB).  Of course, I don't want to run like that!

  The Windows System Control Panel reports (almost) complete 32 GB system memory. Task Manager indicates that only 7% of close to 32 GB is in use.  "About VMware Workstation", reports 32640 MB.

  How can I fix it?  I'm basically dead in the water.

  Bob

  You may encounter the same problem that others have reported in this other thread: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation

  Try the workaround it and see if it helps.

  --

  Darius

• VMware workstation 10 not enough physical memory is available

  Hello

  I'm trying 10 workstation. I have a system with 16 GB of ram. My virtual machine has a reserved 12 GB ram. In wokrstaion 9 being works very well. 10, I get the message

  not enough physical memory is available, try to assign it 11960 Go.

  Why am I suddenly this message?

  
  

  I did a clean install of workstation 9. In the preferences of the reserved ram is 13790. So I get the error. When you set V10 for this value I get warnoing is too, but I can start

• not enough physical memory is available.

  When you try to power on any virtual machine, the warning for "not enough physical memory is available to power on this virtual machine... »

  The Office has 2 GB of ram, of which 1530 is attributed to the workstation.

  I rebooted, tried to run workstation mode administrator, without result.

  We have encountered this same problem in the House and focus on it.

• VMware Workstation 6.5 - not enough physical memory is available to power on this virtual machine

  My host is a processor Intel Core i5 (active VT) and 8 GB of RAM Windows 7 64 bit running with hardware virtualization enabled.
  
  Apart from McAfee Antivirus and the usual Windows updates, no other software has been installed on the host machine.
  
  I am running Vmware Workstation 6.5 and I installed 3 popular VM with below guest OS, s/w and memory:
  
  VMware ESX 4-2 GB
  Server 2003 (DC and DNS) - 1 GB

  Server 2003 (vCenter Server) - 1 GB
  
  However, it is not possible for me to all 3 virtual machines run simultaneously. If I turn on Vmware ESX 4 and try to start Windows 2003 VM, it displays the following message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To resolve this problem, set the parameters in additional memory to allow for more virtual memory machine to swap.

  If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  Can you get it someone please let me know where are the rest of the memory is busy? Size of total memory of 3 virtual machines are only 4 GB and I have to be able to run all the VMs set 3, but in this case I can't even run two virtual machines simultaneously.

  Please help what should I do?

  With 8 GB of RAM on the host allowing why only 1 GB to be reserved for all you run virtual machines?

• my computer again "you're not enough virtual memory" when I'm trying to load a game.

  My computer again "you're not enough virtual memory" when I try to download any game.

  Hi Sue and Betsy,

  This article shows how to increase the amount of virtual memory on your PC: http://windows.microsoft.com/en-CA/windows-vista/Change-the-size-of-virtual-memory (I recommend setting virtual memory to 2500 MB initial size and a maximum size of 3000 MB).

  I hope this helps.

• Application error "not enough of space for the environment" in Vista.

  Could not find the right answers out there for this problem. Application error "not enough of space for the environment '. I am running Windows Vista Home Premium. Thanks for your help!

  I suggest you try compatibility mode.
  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Let us know if that helps.

  Marilyn

• Cannot be stored in itunes, not enough access privileges for this operation

  Download the message saying that itunes cannot be saved. not enough access privileges for this operation

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Photoshop CS3 is not enough virtual memory

  My photoshop program won't let me even open a file now without busting a message saying it's not enough virtual memory. I tried to change the amount of RAM, it offers access too, but it does not help. It does not seem to count how many things I opened.

  Try to change or add to the "scratch disks" Photoshop has access too. Its in the preferences under the edit menu, probably in the performance category, although I don't remember CS3 very well these days.

  Terri