A satellite will not start - how to back up data from the HARD drive?

Similar Questions

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• Computer will not start normally, in safe mode or from the recovery disk - stays on the Green loading bar of microsoft

  I got to my computer today and there was a blue screen with white writing about him say a word on the internal discharge. Then later in the day, the computer froze, after a while the screen went black with just the cursor on the screen. I restarted the computer and now it just does not start. In normal mode it gets as far as the loading screen Windows with the movement of green bar but stays on it indefinitely. If I try to start in safe mode it gets as much as crcdisk.sys and then crashes, and if I try to boot from the Vista recovery disc, it also only gets the windows loading green bar and stay on it. Any help on this would be much appreciated. Thanks in advance.

  Hello

  What is the full error message?

  Follow the suggestions and see if it helps.

  Method 1

  I suggest that do you the Startup Repair through the system recovery options with a Windows Vista installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2

  I suggest that you perform the system restore from the system recovery options with a Windows Vista installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3

  Perform the disk check via the system recovery options with a Windows Vista installation disc.

  a.Select command prompt.

  b.Type chkdsk /f and press ENTER.

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• How to back up data from the iphone water damage over 6 sec.

  I dropped my iphone more than 6 s in sea water, and it seems capable of lighting (which shows a black screen). I'm trying to back up data. When I connect the iphone with the computer, the following prompt box appears on itunes. Now I'm confused. Could someone answer my questions please?

  1. This means that my iphone is still able to turn it on?

  2. that means that only the screen is broken and the motherboard still work?

  3. How can I save the data without entering the password by using the touch screen?

  Thank you very much.

  

  This means you should STOP PUTTING ELECTRICITY through your phone untreated, ack!

  Your phone has a display problem, but yes - it lights up.
  Perhaps your problem is just a bad screen (which is unfortunately a part of $250 to a 6 sec more now).  Apple cannot help you with other water damage that offers to sell you an iPhone refurbished for $349.

  But most likely, your problem is also on the logic board - usually fixable.

  There is no way around the need for touch operation and the image on the phone to access the data.

  In order to access the data on the phone, you need your advice to hold the power and start, (it does) you need of your screen image lines, and you need to contact work.  Ideally, you would also have your backlight lines works as well.

  Most of the phones in this condition have a pretty good shot in data recovery in this situation - touch, and line of the image problems are usually solvable if your phone can be detected by iTunes.   It is certainly not DIY work, this is a troubleshooting open-ended the microsoldering and level of card issues.

  Your only option for recovering data would be to find a good microsolderer experienced in data recovery.

  I recommend to replace any phone which has seen water, corrosion on the Board always weakens solder everywhere, so the phone is likely to have a shorter duration of life more problematic.

  Note: It may be possible to cancel your option for the swap of OOW $349 at Apple if you continue recovering data at the level of Council - although I've never seen this happen.

• Vista boots up to a temporary profile, will not save all the data and will not let me access my saved info. on the hard drive.

  Windows boots Vista on the rise after an error message and leaves me only to use a temporary profile. I can't record anything I create in the session. I can't access files that I have already created on my hard drive. My laptop did not come with discs, and I have no backups. Y at - it a fix for the problem of temorary profile? I know from talking with a friend I need to get a backup in place system.

  Hello

  Using the hidden administrator account (or any Admin) will allow you to access all the files on the computer.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to recover my data from my hard drive?

  I think I already know the answer to this, but here goes: I have a 80 GB IBM sister hard drive who died (not even turn to the top). Nothing exists to get the data on the drive (which only cost me a million dollars?

  Contact data recovery company and you will get back all your lost data. I am sure, it will cost you million but price may be low, but the result will be awesome. With the help of software could save not all of your data you want. Benn through this before.

• How can I move files from the hard drive of your computer to external hard drive.

  Original title: can I add an external hard drive to transfer music from windows media to free up space on the top of the Tower

  with windows media player to manage two mp3 players, running out of space on the top of the Tower, can I transfer and store all the music files on an external hard drive of 1 TB and use windows media player with the external hard drive?

  Hi PaulDocherty,

  I suggest you follow the methods given and check if it helps.

  Method 1: Please run the synchronization in your Windows Media Player.

  Please visit the link below to make a synchronization in your Windows Media Player;

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  Method 2: You can also try to copy and paste option.

  Please visit the link below to copy files to your files on an external hard drive;

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  I hope this helps.

• How to remove unnecessary files from the hard drive using Lightroom.

  Hello

  I use Lr 5.7 on Win7 64-bit. I would remove completely some old files and their contents that were part of my previous, very messy organization. I still have parents and masters images files, so I have no need extra junk on my hard drive.

  I tried to do a right click on the file, but the only option is to delete the catalog. I saw posted solutions that say click on icon less. I don't see an icon less anywhere. As far as I know, Lightroom really doesn't want "delete me" anything.

  Thank you!

  Dave

  have you tried to delete images? You can't delete the folders...

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• My C50-A-1DV Satellite will not start

  Hello

  Yesterday my C50 Satellite would not start. When turned on, it shows the Toshiba logo and then the little circles just keep them.

  I booted into recovery mode and ran chkdsk, but there are no errors on the disc.

  When I restarted, then she says the following:

  Preparation auto repair
  Diagnose your PC
  Check disk for errors
  Auto repair attempt

  Then at the stge small circles just continue.

  I started in safe mode and activated the boot record.

  Attached is the NTBTLOG file

  Thank you very much

  BigD

  Turning off the laptop
  Then press the power button and immediately after that, press the F12 button
  Then you should see a screen similar to this one:

  

  Then I recommend you to choose the option to drive HARD recovery... The last option in this menu.
  This would start the HDD recovery procedure and would restore the laptop back to factory settings...

  More details here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• I have nothing on my screen except the window side bar same not start how he back?

  I have nothing on my screen except the window side bar same not start how he back?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• XP does not start from the hard drive

  I have an old pc under win xp. It does not drive start hard when it starts. I always have a cd/dvd in master dvd for it to start windows players. Can anyone help?

  herikhi

  Hi herikhi,
   
  Change the start of the base system (Input Output) BIOS setting to boot from the hard drive.
   
  Consult the manual of the manufacturer, to do the same thing.
   

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

• Could not initialize and I need to recover the data on the hard drive.

  Original title: computer MOM will not start and I need to recover the data on the hard drive.

  It's an old computer and I do not know what version of Windows it was running.  I guess I need a bootdisk of exploitation, but where can I download that?  Or would it be easier to pull and make a secondary drive in my computer that I just replaced?  It works under Windows XP.

  Hello

  If the old system does not start could be the hard drive. Put the hard drive in another computer as a 2nd drive and then access the files. If you use a computer XP, Vista or Windows 7, you should be able to access the files, unless the drive has failed.

  You can save your files by putting the drive in another computer as a 2nd drive (better) or a USB external drive case and then save up to removable media such as CD, DVD or other USB drives. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This will not work if the hard disk is defective or other issues preventing the system from booting from the CD/DVD drive.)

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite L350-170 - sounds of clanking from the HARD drive

  My laptop Satellite L350-170 performs a kind of rattling noise when the hard drive light flashes.
  Is this normal because this is a replacement one but that I had did not all sounds.

  Hello

  It is very difficult to say why this noise appears.
  I have two laptops. On a laptop, the HARD drive clicks and creates its strange but 4 years it worked correctly.
  The other HDD doesn t create sounds

  So, as you can see not really easy to tell what could cause this noise of rattle, but I recommend creating a file backup.
  In the worst cases could die your HARD drive and as a result, a backup is always recommended.

  You said that the HARD drive has been changed so maybe you should ask ASP for more details and maybe this HARD drive will be replaced again.