A SCREEN BLUE, COULD NOT START WITHOUT HDD FOUND, AFTER WINDOWS XP UPDATE IN FEBRUARY

Similar Questions

• most programs now get error message "could not start from this location after a mail there is session 2 nite".

  After a session 2 nites E-mail there, many programs said message error "could not start program from this location. In addition, long delays after you clicked on a link, a large display hourglass for up to several minutes. Have tried to rebuild, but I think that the problem is still there. Any suggestions?

  What is a "mail session?

  What is, "have tried to rebuild?"

  Edition with Service Pack of Windows XP _ _?

  What anti-virus application that you use, and if she slept in day?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I have a windows computer 7 and when I boot it says windows could not start then he normally open windows or repair.

  * Original title: windows startup

  Hi I have a windows computer 7 and when I start it up it says windows could not start then it says windows normally or repair I choose windows star normally and his coming as a code error 0x0000005c and I did they opsen others, but still the same error code I just wanted if I can back up my photos because they are good, or I can try to solve this

  Thank you

  The BIOS back to their default level settings.

  • Make sure that all internal cables, cards, and other components are installed and correctly.
  • Start your PC with essential hardware only.

  If no change:

  Perform Diagnostics on the memory and hard drive tests.

• Can help to solve the issue of "the application could not start properly? < < Error after update CC

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  I had several programs that I've updated (Adobe PhotoShop, Adobe Audition, etc.), at the same time. None of the other programs seems to have problems starting.

  
  

  I uninstalled Adobe after effects Adobe Premiere Pro CC and CC and have the same results, aka, error notice, after reinstalling.
  

  
  

  I did some research and do not seem to have found a definitive solution to the problem.

  
  

  • Can you please help me solve this problem. If you have encountered this problem and it is successfully resolved your entry is particularly useful.
  • Can you suggest ways to avoid this, or similar questions in the future. It makes me feel very reluctant to update my software CC if I'm going to experience the hours/days/weeks of delay due to having to solve problems.

  
  

  Thanks in advance for your help.

  Hi Leslie,.

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Could not start the virtual machine after you use vmkfstools to resize - HELP!

  I thought I knew what I was doing, but apparently not...

  I tried to increase the size of a VM over 36 GB drive and now I can not start the server. Here's the change front of directory list:

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 9 February 14:55 PJAEast-DL01-000002 - delta.vmdk

  -rw - 1 root root 277 9 February 14:55 PJAEast-DL01 - 000002.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 25 August at 21:03 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1042 28 August to 01:52 PJAEast - DL01.vmsd

  -rwxr-xr-x 1 root root 2779 Feb 9 15:10 PJAEast - DL01.vmx

  -rw - r - r - 1 root root 267 Feb 9 15:10 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 9 February 14:55 PJAEast-DL01_1-000002 - delta.vmdk

  -rw - 1 root root 283 9 February 14:55 PJAEast-DL01_1 - 000002.vmdk

  -rw - 1 root root 36322836480 28 August at 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 597 25 August at 15:18 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 78710 25 August at 16:06 vmware - 1.log

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 vmware.log

  Then, I run the command:

  vmkfstools x 256g PJAEast - DL01_1.vmdk

  And now the virtual machine does not start, return an error: "the virtual disk parent has been changed since the child was created."

  The directory listing is now ("BOLD" indicates the change of information post-vmkfstools):

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 Feb 9 16:12 PJAEast-DL01-000003 - delta.vmdk

  -rw - 1 root root 277 Feb 9 16:12 PJAEast-DL01 - 000003.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 Feb 9 16:12 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1015 28 August 01:52 PJAEast - DL01.vmsd

  -rwx - 1 root root 2779 Feb 9 16:12 PJAEast - DL01.vmx

  -rw - 1 root root 267 Feb 9 16:12 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 Feb 9 16:12 PJAEast-DL01_1-000003 - delta.vmdk

  -rw - 1 root root 283 Feb 9 16:12 PJAEast-DL01_1 - 000003.vmdk

  -rw - 1 root root 274877906944 28 August 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 599 9 Feb 16:11 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 5.log - vmware

  -rw - r - r - 1 root root 39510 Feb 9 16:12 6.log - vmware

  -rw - r - r - 1 root root 39411 Feb 9 16:12 vmware - 7.log

  -rw - r - r - 1 root root 39410 Feb 9 16:14 vmware.log

  I can't do anything else until I get comments. Can anyone recommend a way to solve this problem?

  I thought I knew what I was doing, but apparently not...

  I agree

  Two a problem with the new drive.

  1. You get the error message comes from the basic disk with a different size than the disks of the snapshot.
  2. With a size of 256 GB, you will not be able to create snapshots of the disk (on ESXi prior to 5.0 with a block size of 1 MB)

  What you can try to do is to edit the file PJAEast - DL01_1.vmdk :

  • 536870912 VMFS 'PJAEast-DL01_1 - flat hard' RW--> RW 70943040 VMFS 'PJAEast-DL01_1 - flat hard. "
  • DDB. Geometry.Cylinders = "33418'-> ddb.geometry.cylinders = '4416.

  After that, I would recommend to clone the virtual disk to a new one, replace the virtual disk in the virtual machine settings and resize it to a maximum of 254GB (see "calculates the time system required by the snapshot files" at http://kb.vmware.com/kb/1012384)

  • vmkfstools-i PJAEast-DL01_1 - 000003.vmdk PJAEast - DL01_1a.vmdk

  André

• Do not start satellite A300-1AK after Win Vista update

  Hello all, hope someone can help me

  I have a toshiba laptop with a view, I got the brilliant idea to make a update for a long time that no was not updated at the end I restarted the update as necessary nb. and then nothing!

  The practice turn on the toshiba nb outside screen and then the screen remains black, the hard drive does not read, I tried to put the recovery disk and start the disk but nothing to put the dvd, but no operating system, does not read anything...

  That's happened? Possible that an update is this damage? The problem and as I have already said that I can't act somehow...!

  -I can't access the computer Safe Mode
  -always black screen and does not load the hard disk
  -J' updated because I just reset the laptop with the recovery DVD, so the drive worked, once the update is complete, restart Windows that I came out of this black screen, I noticed that does not read the hard drive. ..

  Thanks for all the support and suggestions.
  Please send me more ' procedure to run

  Francesco

  Hmm, do you mean you don't see anything? Neither the Red Toshiba start screen?
  What to say it doesn't sound good.

  But try this short workaround:
  Disconnect the power adapter, remove the battery. Leave the laptop for a while disconnected from both parties I would wait a few hours
  Then bring the two parties together and try power upward

  Good luck

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Could not open the virtual machine after Windows blue screen

  I updated my machine Windows 8, he projected blue, now I can't open my VM that I had open at the time of the blue screen.

  This is the message that I received from VMware Workstation 10 attached.

  Search for files of *.lck in virtual machine directory - delete them all.
  Also delete the directories named *.lck

  Then try again - if it still does not need more details

• Could not start the Apps level after movement Machine OS

  Hello
  
  I am Oracle EBS 12.0.4 on IBM AIX, there was activity on the side of the BONE to move the Machine. After the physical movement of the server has been started, but now the listener fails to start, the following errors were found in the journal of the listener
  
  System settings file is /u01/oracle/PROD/inst/apps/TEST_ebscl2/ora/10.1.2/network/admin/listener.ora
  Log messages written to /u01/oracle/PROD/inst/apps/TEST_ebscl2/logs/ora/10.1.2/network/apps_prod.log
  Trace information written to /u01/oracle/PROD/inst/apps/TEST_ebscl2/logs/ora/10.1.2/network/apps_prod.trc
  Trace level is currently 0
  
  Started with pid = 479272
  Error listening on: (ADDRESS = (PROTOCOL = TCP (Port = 1626))(Host=ebscl1))
  TNS-12542: TNS:address already in use
  AMT-12560: TNS:protocol adapter error
  AMT-00512: address already in use
  IBM/AIX RISC System / 6000 error: 67: address already in use
  
  Check the listener.ora, check etc/hosts, but another thing that should be checked?
  
  Any help will be appreciated.
  
  Thank you
  
  Published by: user8676543 on April 13, 2011 03:26

  Salvation;

  Please check below note that might be useful for your question:

  Listener fails to start on Linux, errors with TNS-12542, Linux error: 98: address already in use [301014.1 ID]
  Listener fails to start with TNS: Address Already in Use (TNS-12542 TNS-12560 TNS-00512) [ID 416566.1]

  Respect of
  HELIOS

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Windows could not start - black screen

  My laptop does not start - I have a black screen with the message

  Windows could not start.  A recent hardware or software change might be the cause.

  
  

  File CLFS. SYS

  Status: 0xc00000e9

  Info: Windows could not load because a required file is missing or damaged.

  I ran the Vista startup repair disk, but results from that start-up cannot repair this computer automatically.  root cause found: critcal C:\CLFS boot file. SYS is corrupt

  I can't start in safe mode - when I try it starts to list files, stops after about 5 and then sends me the black screen message.

  Hello

  To begin with, would not be clfs.sys C:\, it would be under C:\Windows\System32. This could indicate one of the following two issues:

  (1) your boot sector is damaged.

  (2) you have a virus masquerading as a legitimate system file.

  For one, the first thing you should try are the steps detailed here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.