A serious error occurred when exporting the message?

Im just trying to export my project. First works perfectly when editing long hours.

When you export, I get a serious error. So serious... SERIOUSLY!

Weird solution, but the problem is solved!

«Click to navigate to the folder in the Finder menu go & Type ~/Library > preferences > Adobe and rename it to Adobe.old or add your name in the list with the permission of reading writing.»

http://forums.Adobe.com/message/6091079#6091079

Tags: Premiere

Similar Questions

  • Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

    To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

    So I need help what is not going to get this new job of fixing.  What should I do?

    Thank you!

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

    You can follow the link below to ask your question:

    http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

    I hope that helps!

  • I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

    I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

    Running windows 7

    original title: cannot burn DVDs

    Hello

    You can disable video filters in Windows DVD Maker, and then check.

    Video filters in Windows DVD Maker: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  • Error occurred when parsing the plug-in software

    I'm upgrading to 11g 11.1.0.1.0 Cloud control grid control 12.1.0.3.0 using 1-system approach. And I patched to the pre-upgrade console.

    After that I downloaded all the agents and plugins form upgrade to Oracle Enterprise Manager Cloud control 12.1 & lt; / title & gt; & lt; meta name = & quot; Title & quot; content = & quot; Upgra...

    When I try to validate the software, you can validate only agents, for the plugins, it displays:

    I use the root user, and zip files are all 777, unzip it works, I can see the plugin_bin file in my directory, but it is empty

    Thanks for any help!

    Error occurred when parsing the plug-in software.

    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.em.smss_2000_0.zip
    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.db_2000_0.zip
    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.emrep_2000_0.zip
    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.csa_2000_0.zip
    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.beacon_2000_0.zip
    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.emas_2000_0.zip
    • Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.oh_2000_0.zip
    https://vanpgoragc01:7799/em/cabo/images/t.gif

    https://vanpgoragc01:7799/em/cabo/images/t.gif

    Hello

    Please note the plugin software used in the upgrade page 12 c Console is different from the one used during the upgrade of the WHO, so please make sure that the correct software is used

    1. navigate to the following location, where the binaries of software are installed and verify the plugin .opar file listed in the error message:

    $ cd <12c_OMS_HOME>/sysman/install/undeployed_plugins

    If available, copy them to a location that is accessible.

    2. If the plugin Internet files do not exist in the 12 c SGD Oracle Home, then download and stage the agent and software plugins correctly in the intermediate directory from the following URL.

    http://www.Oracle.com/technetwork/OEM/grid-control/downloads/OEM-upgrade-console-502238.html

    After you download the software and verify that the intermediate directory is properly referenced, run again the validation of the software.

    Check also the steps are as

    EM 12: the upgrade of the 11.1.0.1 Enterprise Manager on Linux x86_64 to 12.1.0.1 with method 1-System (Doc ID 1364931.1)

    Kind regards

    Rahul

  • ODI-40837 ERROR: an error occurred when creating the schema

    Hi I'm testing a file xml server and receive the following error message.

    ODI-40837 ERROR: an error occurred when creating the schema: ODI-40738: SAXException has been surprised by reading the model saying: expected 'DOCTYPE '.


    JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml & ro = true & DOD = YES

    could someone help because I can not find any blog or documentation on this error?

    Thank you

    Published by: user626688 on May 31, 2013 13:26

    There seems to be a problem with your xml file. Please work with channel support to investigate this issue.
    You can also view the details of settings xml driver to http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH

  • creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

    I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

    "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

    Change Windows DVD Maker DVD-Video settings
    http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

    See if there is another program interfering.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/default.aspx/KB/929135

  • An error occurred when accessing the Windows CardSpace...

    So, I get this error message whenever I clicked on Windows CardSpace in Control Panel. "An error has occurred all by accessing the Windows CardSpace. Please see the the event log for more details. "I checked the event log and I read a bunch of posts which basically means the same thing. "An error occurred when communicating with the Windows CardSpace service." "" An unknown exception caused the request to fail. For more information, please see the event log. Inner exception: attempted to perform an unauthorized operation. ""An error occurrred while accessing the card collection.  The store directory or file ACL Bank had is shown to be altered. The ACL have now been restored to their default settings. ""An error occurrred while accessing the card collection.  Unable to open the store. »

    WHAT DOES THIS MEAN?

    I logged the administrator account and noticed that Windows CardSpace actually worked. Well, it's good to know he works at least on one account...
    I would try to make a new user account, but I haven't the time to copy everything back. I'm not seriously. Last week, I spent three hours to copy my files after reinstalling Windows. I really want to do it again.
    I read that this may be evidence of a corrupted user profile, but I don't get any messages on my user profile be corrupt.
    Is there an another fix for this error?
    Please help me with this, I know other people had this problem.
    Thanks in advance,
    ~ yosecchi1098

    Hello

    You can post your question here for assistance:

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  • Error occurs when applying the patch 9239089 pre-installation tasks

    Error occurs when the application of pre-installation tasks of patch 9239089

    ----------------------------------Pre-install Tasks--------------------------------------
    4. use SQL * more to run the script:

    UNIX:
    $ sqlplus/nolog
    SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql < name of the APPS schema >

    ----------------------------------error message---------------------------------------

    End of creation of Package PL/SQL AD_DBMS_METADATA.

    DECLARE
    *
    ERROR on line 1:
    ORA-20000: ORA-00933: SQL command not properly endedError in
    ad_grants. Give_grants
    ORA-06512: at line 685



    Validation complete.

    Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
    With partitioning, OLAP, Data Mining and Real Application Testing options


    Thank you
    Jackie

    Jackie,

    $ sqlplus/nolog
    SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql

    You must run the script as follows (replace with apps):

    SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql apps
    

    Thank you
    Hussein

  • ' Error occurred when converting the file 'name of the song. The required disc could not be found. "

    OK, so I got a new iMac 5 k and restored my iTunes library by dragging the system files to the new machine via the time machine (I didn't want to just restore from my old mac).

    While trying to copy a cd to my iMac (via an external cd drive) I get the message below. I searched the darkest depths of the internet for a solution without success. Many people seems to receive this message when they have their iTunes on an external hard drive and the only reason why, I guess it's a problem for me is due to the fact that I imported time machine. I followed the steps suggested for these people (which includes iTunes will > Preferences > advanced and then to change the location, but that seems not work.)

    Any ideas?

    Thanks in advance

    Well I hope that you have solved this problem now, but if you don't have the answer for me was to use one of those USB "Aristide" leads on my CD/DVD drive Samsung external. They are the kind of son who have a mini-USB input in the drive, but two USB inputs in the computer. Which delivers more power to the drive.

    I got the idea from a post here a few years ago. Re: Error importing to iTunes on CD. The required disk cannot be found.

  • Windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057

    So I just finished my first build. All this POST-ed fine, but I can't get 8.1 Microsoft 64-bit OEM installed on my SSD.

    At first I could start a custom installation and it went through fine until the first reboot. This is where it says "disc error". I tried again hoping it would go but noticed a 350 MB "System reserved" Partition with the rest of my space unallocated in my 1st attempt to install.
    I googled this problem and was told to remove the reserve system, so Windows could create its own partition, or something of that kind.
    Installation works well until you restart again, where this time it says press any key to boot from the cd drive or something of the sort so I don't hope that Windows 8 would be to continue the installation. However, he wanted to just restart the entire system again!
    I try once more in the hope that it would work, I remove the additional partitions created and repeat and this time I can't even begin installation due to the message in the title of this post.
    Since I was:
    -Make sure SSD has been selected for AHCI (it was already on it)
    -Reconnected given SSD + cables power as well as the CD player on shutdown and reboot
    -Run Diskpart to repair the boot with these commands:
    -diskpart
    -disk list
    -select disk 0
    -clean
    -output
    Same error code came again after attempting to reinstall. So I tried a few other commands:
    -diskpart
    -disk list
    -select disk 0
    -clean all the
    at this point, he said: DiskPart has encountered an error: the request could not be performed because of an i/o device error.
    Someone please help!

    Try to create the new partition and do. for example, to verify the steps for Windows 7-

    http://support.Microsoft.com/kb/2476568/en-us

    Likewise, create a partition first.

  • Error occurred when downloading the iOS on iPhone 6s 9.3.2

    I tried many times to download this update and it still shows 'an error has occurred while downloading', what can I do?

    Restart your iPhone, and then try again.

    Restart your iPhone, iPad or iPod touch - Apple Support

    Is best to connect the iPhone to the charger to update to iOS, not only on the battery.

  • Error occurred when using the compiler CAP

    I developed a J2ME MIDlet program that can run on the mobile phone. Now, I want to run it on the BlackBerry. I tried to use the compiler CAP to change the .jad and .jar format .cod files. However, he returned the following error message.

    Error! : offset of field too big for: cmdJobDetailGoToTop

    It should not be a java error.

    Someone has seen this before and how to solve?

    Thank you very much

    This error indicates that the class containing the data member cmdJobDetailGoToTop has too many data elements of members where the upper limit is 512 words.  It is worth noting that the number of double and long for two words in this upper limit.

    Finally, the members of the classes of database would contribute to this indictment as well.  To resolve this problem, you must reduce the number of data items in this member.

  • An error occurred when creating an application

    With the help of EMP 11.1.2.3.

    I want to create a classic application.

    I created the user database with all of the grants.

    I created a data source in EPM.

    When I try to create the application, it returns "an error occurred when creating the application."

    I searched through all the directories of newspapers and can not find a single log file that captures the reason for the failure.

    Last time that this happened, someone said I should check and make sure that all services were running.  I'm not quite sure where to look for this on a Linux machine.

    I don't know where to another to watch, or what else to do.

    Any suggestions would be helpful, because I am relatively new to EMP.

    Thank you.

    Bingo, now, you must run the configurator and check the details of planning for the datasource planning repository. It should point to your R & A schema. If its correct.

    Then, change the details to have your outline plansys and redeploy the application planning both by the configurator. In the end, you will need to reconfigure the web application of the Foundation. so that all the information updated in the registry.

    You can check the location and measures of reference in my post above.

    Hope that solves your problem.

    See you soon!

    SH! going

    PS: If your outline plansys have tables of HSPSYS_, then you will need to select drop and re-create option of the configurator. as the safest stages, you can take backup of plansys.

  • When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details"

    When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details". Unfortunately, there are no errors listed below and the green bar is frozen on the screen. The message remains in my Outbox and repeated again and again sending. There is absolutely no record and file sent in my sent box. TIA - Ernie

    You have apparent dbx file corruption. A common problem.
     
    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
     
    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
     
    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
     
    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
     
    After you're done, followed by compacting your folders manually while working * off * and do it often.
     
    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
     
    General precautions for Outlook Express:
     
    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
     
    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095
     
    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3 
     
    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
     
    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
     
    Compact often as specified above.
     
    And backup often.
     
    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx 
  • I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

    I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

    But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

    To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

    Thanks for any help.

    You have a corruption of dbx file easily corrected.

    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

    Compact often as specified above.

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

Maybe you are looking for

  • Spam SMS re Apple ID or iCloud

    Just a warning to SMS messages claiming to be from Apple on the deactivation of the iCloud or ID Apple ID accounts are spam. 2 received this morning. The source is a shortcode 27753 + 44.

  • niDMM property node

    niDMM property node I use LabView 2011 on Win7. I'm working my way through the part of the "verification Procedure" of the "NI PXI-4071 calibration procedure. Step 5 of the procedure of verification of applications invoking an "accessible property ni

  • After restoring my system to Windows Vista, my screen resolution is incorrect.

    Screwed up resolution :( I had to restore my computer to Windows vista after putting 7 window on it... now my screen resolution is turned off, it is the top of the screen to the bottom, but has 2 black bars on the sides... Ive already tried to settle

  • WIndows Vista not finding free Wifi connections

    I am running Windows Vista on an Inspiron 1420.  I used to connect to open wifi connections and now windows won't recognize that my connection at home I put in place manually.  I can see the other connections wifi with my computer, but windows will n

  • Help blackBerry Smartphones! BlackBerry died trying to update software!

    Hi all! I was on the BB support site this morning and tried to download the latest version of the software for my Pearl. My original problem was that I was unable to download anything on the device and I continued to receive a message saying there is