A single element in order to Purchse Standard is "Definitely closed" status

Similar Questions

• Adding a single element of the array sequentially 1 d to new unique table

  Hello

  I'm getting a table 1 d of double inside the while loop. Table 1 d consists of only a single element, and it replaces itself every time through the loop. I need to store them in a table of given length separte before you overwrite it.

  For example: I get table 1 d from 1 to 10, but in the order either 1 and then loop 2, then 3 and so on. 2 replaces 1, 3 replaces 2 and so on. What I have to do is to save the incoming values before the replacement of 1 to 10 in one separate table.

  I tried to use the table to Index and build functions of table but I could not get the desired result. I also tried to use registry to shift, but I think I'm wrong somewhere. You please help me.

  Thank you for your help.

  Did you want something like that? The table is built and stored in a shift register (if you were on the right track). Where you might have gone wrong is with the function Array build - you must right click and choose "Concatenate entries" in order to add each new table 1 at the end of the existing d - If you don't then it adds the new table as another dimension to the existing one!

  

• How can we do a single element with the content of two clips

  How can we do a single element with the content of two clips

  You try to get a picture of image? In other words, that contained two visible clips at the same time? If you are, change the substantive item to you main plot and another tie on top using an edit connect to the battery. Select the top item. Activate the transform tool and resize and reposition the clamp if necessary.

  Russ

• How a shared single process variable be FIFO and single element?

  How a variable shared unique process can we both FIFO and the only element at the same time?

  I read the NOR recommended for communication between a loop deterministic and non-deterministic loop.  He is said to use SVariable ingle-process Shared FIFO and single element.  OK I can't have something... because in my mind these two things must be mutually exclusive.  How do you have a single item 1?

  

  What 'RT FIFO activé' means, that when you use the variables shared in a timed loop it actually is written to a RT FIFO created automatically.

  The key here is that generally shared variables are shared resources and can add jitter to deterministic tasks if another loop uses the variable at the same time as your loop of deterministic.

  So here's the takeaway, when shared with RT FIFO active Variables using:

  • Normal loops read and write the shared variable in the same way as they always do.
  
  
  • Call loops read and write a FIFO RT rather
  
  
  • The data is automatically passed between the RT FIFOs and shared in a nondeterministic loop variable

  RT FIFOs exist because their architecture referred to as non-blocking so that when the timed loop trying to access it is guaranteed immediate access to a memory space.

  Does that answer your question?

• I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  You are 100% sure that you are clicking to download the Mac version and not the version of Windows?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Is it possible to display a single element on a treemap?

  Hello world

  I have a small question... (I use jdeveloper 12.1.2.0.0 and the database to oracle - HR)

  I have a treemap showing salary by departments, like this:

  -Administration, €50000

  -€40000

  -etc.

  When I select one or more departments, the treemap is updated to display only the selected departments but whenever I select one, it gives me: "no data displayed".

  I can't show a treemap with just a single value on it? It must have at least 2 elements?

  If I can do it, how can I to do?

  Thank you all and my best regards,

  Frederico.

  Hi Frederico,

  I can't see what you want to achieve. I don't think that this element has been designed for 1 element that has no children. I think the only way to display a single element adds a new level to the treeMap when you create (in this case, employees). Otherwise the treeMap would become redundant and without showing significant since information there is no data to compare and map.

  Concerning

• Return orders with three elements unique order number

  Dear all
  
  I want to return orders containing elements of each of the three elements (for example, 345, 7654, 876) in each order, if not.
  
  Order of the tables:
  
  order_no number (6).
  item_no number (7).
  ORDER_DATE date
  
  Select * command
  the point where (en) have at least three as shown above in a single order
  
  
  
  Please guide me how
  
  
  Kind regards... Soilihi

  It is always useful to post examples of data as well as the results expected if we do not have to guess. I created my own sample data, so this may or may not work for you:

  SELECT  ORDER_NO
  ,       ORDER_DATE
  FROM    ORDERS
  WHERE   ITEM_NO IN (345,7654,876)
  GROUP BY ORDER_NO
  ,       ORDER_DATE
  HAVING COUNT(DISTINCT ITEM_NO) = 3;
  

  Test

  SQL> CREATE TABLE ORDERS
    2  (
    3          ORDER_NO        NUMBER
    4  ,       ITEM_NO         NUMBER
    5  ,       ORDER_DATE      DATE
    6  );
  
  Table created.
  
  SQL> INSERT INTO ORDERS VALUES(1,345,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(1,7654,TRUNC(SYSDATE))
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(1,876,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(2,1,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(2,2,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(2,3,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(3,345,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(3,2,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> INSERT INTO ORDERS VALUES(3,876,TRUNC(SYSDATE));
  
  1 row created.
  
  SQL> SELECT  ORDER_NO
    2  ,       ORDER_DATE
    3  FROM    ORDERS
    4  WHERE   ITEM_NO IN (345,7654,876)
    5  GROUP BY ORDER_NO
    6  ,       ORDER_DATE
    7  HAVING COUNT(DISTINCT ITEM_NO) = 3;
  
              ORDER_NO ORDER_DATE
  -------------------- -------------------
                     1 02/23/2010 00:00:00
  

• variable single process shared with the single element fifo reading arbitrary values

  Hello

  my request in real-time has a motion control loop and a loop of data acquisition. Before the move, the starting position is read once in the motion control loop and recorded as a shared single process with fifo variable single active element (I want to save only the last value). The starting position is then read several times in the loop of the acquisition of data and compared to the actual position. The movement is stopped in the DAQ loop when the difference between the starting position and the actual position reaches a certain displacement of the target.

  Now to my problem: the starting position is read in the loop of data acquisition of the variable correctly shared in the first round after having been written. Then it keeps read an arbitrary value that I have no idea where it came from. How can this happen?

  I summarize: I write the starting position once and then read it several times to calculate the actual shift...

  Thanks in advance for any help! Kind regards

  Grun80

  Hey,.

  It is a strange behavior, usually the variable should return the last value written. You write the variable in another place of the code too? You debug the application?

  What is the RT platform you are working? Version of LabVIEW?

  I suggest using a "functional Global Variable" and see if you still get this random values.

  Christian

• Cluster unbundle element hustling order

  I use different cluster two 1 and 2, inside the cluster name, the name of the element are identical. I am that by placing two clusters in a more cluster name 3. all three groups are of type def. I'm unbundiling the 3 cluster in my program.this it works very well. I put one more element in Group 1 or 2. then my order of unbuldiling cluster evolves.

  Hi Labview,

  You can attach a screenshot of your blockdiagram? Cannot visualize more clearly your statements. IAM asking for screenshot because Iam using LV2009.

• Mix the beginning and end of a single element?

  Hi - I'm fairly new to CC of the hearing. I have some samples of jet exhaust noise, in the form of .wav files saved. These files are from 0:04 to about 0:12 seconds in length and different depending on the State of the motor (idle, max, etc.).

  The problem is: I need to use these samples to create the ambient noise constantly running at the same volume all along. If I just loop the unique wave, the end of the wave file does not match how it started.

  I understand that I can fade the ends to create a smoother transition, but which lowers the volume - where in this scenario, I'm looking for the volume to be constant loop after loop after loop.

  Is there a way to blend at the end of an element so that it engages smoothly before the start of the next clip?

  Yes, it is a way to do it, but it's complicated bloody!

  You have to find the longest continuous section you can (IE no change at all) and loop that. Although the chances are that you will always hear the join. So what you do is take your section in loop and turn it into a single file. You take this file and place a copy of it under the original track, only offset by about 1/3 to 1/2 the length of the loop - 1/3 is quite good, because you can do it again, so then you have loads of overlapping samples. Chances are when you play together, they will blend more smoothly. You may need to experiment a little, but I'm sure you get the basic idea.

  If the samples are really short, then you make a loop of loops - a much easier way to extend that just stick several sections over and over.

  Otherwise, look for some samples longer - I'm sure there are some.

• Play random single element of the array?

  Super rookie here in Flash.

  Is there a basic AS3 code to have, when the SWF load, a simple reading of the video from a collection of videos in a table? And can the code also apply to the sounds without video?

  I just discovered that the tutorial I used randomly does not work with audio - as he plays just all at once - you could 'see' a video - but you hear all.

  So from what I read, I need us a table (which seems fairly simple), but I don't want to play all clips - I want it at random, select and read a. Don't know exactly how I put to the top of the video playback area (the video plays where I want, in the size I want).

  Also, I have other pages that are simply audio - audio has some sort of player or something to it?

  Ty

  The part of the length of this code is the property of length, which is like any other property to any object in the sense that you use the Word as shown 'length' (not its value like you tried) and it will hold the value of this property.

  In order to reduce the size of your file, do not import the files into your fla, simply load the selected where they are dynamically when the file is running.  Listen to the video of his external location and your swf file will be happier for it. For the FLVPlayback to play the video, you must assign the source property.

  var my_videos:Array = new Array ("cat1.flv", "cat2.flv"); actual file names

  var randomIndex = Math.floor (Math.random () * my_videos.length);

  yourFLVPlaybackName.source = my_videos [randomIndex];

  You should look for the FLVPlayback component in the help documents and familiarize yourself with all that's properties, methods, and events.  In fact, you should learn to do this for any object that you want to use in your designs.  Each object class that you will use in a design those has three elements, properties, methods, and events, which not only define the object but also your key to make use of them.  So whenever you're wondering how an object works, the first thing you should do is look in the help documents to see what properties, methods and events support it.  I hope that repeat the words properties, methods, and events in this section will help to drive home to the point that the help documents are an excellent resource to find the information needed to make things work (properties, methods, events, and sometimes CONSTANTS)

• control array element changing order

  I have observed several times where some of my paintings of controls have their items change order between debugging sessions.

  It's unpredictable when it happens.  But the symptoms amounted to my controls bad secondary control (for example, LED #2 gets turned on when the #0 SWITCH is pushed).

  When I inspect control arrays, I can find that one or more items are now out of use.  When I their difficulty in IUR again, then all is well again.

  Any thoughts on how to lock them to the UIR?

  ElectroLund,

  One thing I noticed on your code, you call the GetCtrlArrayFromResourceID function at the top of each callback. Because the control panel should not change while the program is running, I might suggest you make all these function calls in the main function as soon as the program starts and just store it for use in the recalls. Which probably isn't helping the problem here, but it would make things a little more efficient.

  Nothing is coming out for me right now as being a possible cause of the problem. I know you said you've been changing the code in an external IDE; to be clear, have edited the UIR file in any external editor?

  One thing that was suggested by one of my colleagues was to create control arrays in source code, instead of using the GetCtrlArrayFromResourceID function. This would ensure that the controls are in the order that you want them to be, even if it would take a little more code to implement.

• Need to concat multiple elements into a single element

  Hello, here's my challenge:

  Query:

  (SELECT XMLROOT

  XMLELEMENT ("Inv",

  XMLAGG)

  XMLELEMENT ("Invline",

  XMLELEMENT ('Category', i.category)

  XMLELEMENT ("Amount", i.amount)

  '')

  )

  ), VERSION "1.0"(, OUI AUTONOME).» EXTRACT ("/ *")

  DE)

  SELECT 1 AS corresponding inv_no, 'Work' AS category, 5 RISE FROM DUAL

  UNION ALL

  SELECT 1, 'their pocket', 10 OF the DOUBLE

  UNION ALL

  SELECT 1, 'Journey', 20 OF the DOUBLE

  UNION ALL

  1. SELECT 'Journey', DOUBLE 2.5) i;

  Returns:

  <? XML version = "1.0" standalone = "yes"? >

  < Inv >

  < Invline >

  Labor < category > < / category >

  < amount > 5 < / amount >

  < / Invline >

  < Invline >

  < category > refundable < / category >

  < amount > 10 < / amount >

  < / Invline >

  < Invline >

  Trip to < category > < / category >

  < quantity > 20 < / amount >

  < / Invline >

  < Invline >

  Trip to < category > < / category >

  < amount > 2.5 < / amount >

  < / Invline >

  < / Inv >

  Mandatory:

  <? XML version = "1.0" standalone = "yes"? >

  < Inv >

  < inv_no corresponding > 1

  Labor < details > 5

  Pocket 10

  Travel 22.5

  < / details >

  < / corresponding inv_no >

  < / Inv >

  So I would support combining the details in a field for transmission to the Mexican tax authorities (their calls spec for all the lines of the invoice be concated together).

  Note that there are two travel details that need to be summarized thus.

  I wish I can not change the query if possible, just using the XML features.

  Thank you!

  And your version of db?

  11.2 and beyond, you can use the aggregate LISTAGG function to concatenate the data type character in the whole of lines:

  SELECT XMLElement ("Inv"

  XMLAgg)

  XMLElement "(corresponding inv_no

  v.inv_no

  XMLElement ("details"

  listagg(v.category ||) ' ' || TO_CHAR (v.amount), 10

  the Group (order by v.category)

  )

  )

  )

  )

  DE)

  SELECT t.inv_no

  t.category

  sum (t.amount) as the amount

  DE)

  SELECT 1 AS corresponding inv_no, 'Work' AS category, 5 RISE FROM DUAL UNION ALL

  SELECT 1, 'pocket', 10 OF DOUBLE UNION ALL

  SELECT 1, 'Journey', 20 DOUBLE UNION ALL

  SELECT 1, 'Journey', DOUBLE 2.5

  ) t

  T.inv_no GROUP, t.category

  ) v

  GROUP BY v.inv_no;

• Formatting of a single element of text in a text box (I know... I'm sorry)

  Hello

  I have a real problem to identify ways to format a single word in a text border box.

  I looked at all the issues here around that and they all seem relatively simple, but nothing that I do doesn't work.

  I created a symbol with a text box called initialText. I then placed the following code in compositionReady on the stage:

  SYM. $('initialText') .html ("< p > for business decisions, it is useful to ask yourself five questions < strong > < facilities > on the left.") If your answer to any of these questions is 'no', you have to stop what you're doing immediately and seek advice from your manager, your human resources department or your legal team and compliance. (< /p > ');

  However, it is simply not displaying all the text at all. I am pulling my hair - how can be so hard to format a single word?

  Could someone please talk me through it step by step, assuming that I'm a fool?

  Thank you

  -mat

  Post edited by: Matt Hindle - changed apostrophes on 'no' to double

  Yes. I guess that your text is placed somewhere in the main timeline or in a symbol. If you are not sure of the way, when you are in compositionReady of the timeline on the side, you can use the code window to add your code.

  Chose / editing text and the forest down to the text name and double-click it. Will add the code text where you are (compostionReady of the chronology of the coast or where you are.) See the example below:

  

• First of 12 elements there order film?

  Try setting the pace on the clips that were shot a different cameras. Some of them are from the beginning of the 1990s and have 11 fps. Is there a command to interpret the film in this version?

  12-31

  What operating system is running your 12 items first? And have you updated from 12 12.1 yet? Any background in case we

  There are discussions evolve.

  Now to access your question... go to the Expert workspace and right click on your active project file. In the drop-down list, select interpret footage.

  Only in the footnote on the case... There are several ways to create slow motion effects and fast in Premiere Elements, interpret the film is one of them.

  For an example of the dialog box to interpret the film, please see screenshot below

  

  Please review and consider. For any question or need more information, feel free to ask.

  Thank you.

  RTA