A single link Dock with S440
Hello
I have been using the combination of S440 and docking station a link from December (purchased together). And they worked together very well. Since 2 or 3 weeks now every time I have start the PC via the docking station a link it does not start. If I remove the dock and start over again everythimg is OK and when I reconnect after you start as well. It is a real nuisance. Oneone coincidentally had the same problem or know the answer?
Similar question - when adding small USB hub in a single link dock. What you have connected to it?
Tags: ThinkPad Notebooks
Similar Questions
-
P2414H single link or dual link DVI - D?
Hello! Is the port on the Dell P2414H single link DVI - D or double link? I won't use Displayport.Should I use a cable single link DVI - D or a cable dual link DVI - D? If both work very well what is the best/recommended type of DVI - D cable between the two? Thank you.
The port is DVI - D Single Link HDCP, with a maximum resolution of 1920 x 1080. Thus, it does not matter what DVI cable you use SL or DL.
-
Pavilion ELite HPE-250f: ATI Radeon HD 5770 have double or Single Link DVI
I have a HP Pavilion Elite HPE-250f come with a special version of the HP of the HD5770 AMD. Features HP say the Single-Link DVI. However, the Board of Directors contains 2 DVI - I connectors, which suggests that it is related to two. I want to buy a 2560 x 1440 screen, but it requires a DVI Dual-Linked. Can anyone confirm that the version of HP is double-linked or indead SIngle-Link? Thank you.
Hello
From the following link, it says DVI dual-link:
http://www.Walmart.com/IP/HP-HP-HPE-250F/14271926
I hope this helps.
-
Connect two displays high-resolution station dock with T400s
Hello
I would like to connect my two DELL 2709W monitors at my station dock with my T400s laptop but the dvi ports do not give me enough resolution. I need 1440 x 900 at the same time.
Curretly I can get this resolution on one of my monitors via the single HDMI port, I have in the dock station.
What can I do? Is there for example any graphics card external that I can buy to fix this problem? Or perhaps there is a direct solution?
Thanks in advance.
I don't think that the t400s is powerful enough to run two screens wuxga. (but you can check)
http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?... This would certainly work
-
My company recently purchased HP EliteBook 840 G1 laptops with discrete graphics. Alongside this, we use the Dock UltraSlim 2013 with dual monitors HP LV2311 connected using HP DisplayPort / DVI adapters.
8.1 Windows displays only a single monitor, that the second monitor is not available. I can try to cover both monitors for a resolution fo 3840 x 1080, but when I try to do just the display reverts to the poster in mirror.
I can use the DisplayPort on the side of my laptop and just a single DisplayPort on the platform and the OS will see both monitors.
Please advise, it is unnecessary to have a dock with double DisplayPorts which cannot display two monitors with them.
Yes the problem really existed with the original HP driver and that Microsoft installs by default. HP released a newer driver for 8.1.
-
When I open a link irc with a string name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "7%" instead of "~" at the end
http://img835.imageshack.us/img835/2856/clipboard05nq.jpgI can't open the image, but I can say something in general about the tilde.
The tilde "~" is an unreserved character and that's why it can be replaced by its form encoded percentage '% 7' inside a URI without changing the meaning. See
http://en.Wikipedia.org/wiki/percent-encoding
According to article 2.3 of RFC3986 we should prefer the encrypted form so this behavior seems to be somewhat outdated. -
Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?
I have the same problem, but the difference is in the opening of the MS WORD hyperlinks to download documents (for example http://ntv.spbstu.ru/2011/hss_2011_3.pdf#page=145 ). This link wants to call MS IE.
At the same time, all the HTML links are opened in FireFox. -
I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone. The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?
Probably there is debris and dust in the decision-making of the lightning. Serve with compressed gas canned (NEVER orally). If this doesn't help, try electronic contact cleaner has a q - Tip. Finally, take it to Apple.
-
How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.
I have no experience with Windows Calendar, but see this article for a bit of luck:
Customize Windows Calendar
http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar -
Hi guys,.
I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.
I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.
I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.
Thank you for your help,
Adrian
Hi Adrien, Valentine's day. Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them. There are always SIP service is enabled on the Codec with link and link itself. Codec uses IPV6 local links for the link itself. Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link. Link runs a FWD SIP process that handles the request. Sorta like a mini SIP registrar if you want. Codec will send the message to REGISTER using link-local IPV6 address. Example of message is less than 200 Ok.
77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!
77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0
77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport
77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6
77582.64 SipPacket CSeq: 47083 REGISTRY
77582.64 SipPacket Contact:
«': 5061; transport = tls >; + sip.instance =»
77582.64 SipPacket of:; tag = 116a994ac2281c72
77582.64 SipPacket to:
77582.64 SipPacket Max-Forwards: 70
Road to SipPacket 77582.64:
77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)
77582.64 SipPacket expires: 3600
77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"
", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"
77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out
77582.64 SipPacket Content-Length: 0
77582.64 SipPacket
77582.64 SipPacket >!
-----------------------------------------------------------------------------------------------
77582.65 SipPacket SIP/2.0 200 OK
77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a
77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6
77582.65 SipPacket CSeq: 47083 REGISTRY
77582.65 SipPacket of:; tag = 116a994ac2281c72
77582.65 SipPacket to:; tag = e84d13204776ebc2
77582.65 SipPacket server: fwd
77582.65 SipPacket Contact:; (+ sip.instance =""
77582.65 SipPacket Content-Length: 0
77582.65 SipPacket
77582.65 SipPacket >!
-------------------------------------------------
I removed my own addresses, so you get the picture here.
It is the same for the link. Link will send REGISTRY as well to himself.
Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.
You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices. This is why the Service SIP on the codec cannot be disabled.
The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.
CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)
CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)
These are new, so the visibility may not be there yet.
If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link. If so, turn it off and start.
Do the same on the codec as well. Disable outgoing SIP and restart the computer. There may be some cases, you do not see this, as the investigation continues with the bug above two ID's
I hope this helps.
VR
Patrick
-
Hello world
I have configured single sign-on with OAM to guarantee a non fusion web application. But she cannot lead to the OAM sso login page. Could you please say nowhere I need to check?
The web application deployed in a weblogic domain, the console already be configured for authentication sso OAM successfully. But the deployed web application does not can be redirected to sso login page when go to a secure page.
The web.xml file is
<>login-config < Auth-method >CLIENT-CERT< / auth-method > < domain name > myRealm < / realm-name > < / login-config > Thank you.
Hello
Assuming that you go directly to the port of the Weblogic Server and not through a web server, acting as a proxy, try to add the url of your application as a resource in the Application domain 'IAM Suite' in the /oamconsole, which gives it an authentication strategy of 'Protected level policy' to see if this changes the behavior. This is a test - if it works, it's best to create your own application domain for your resources so that they can be managed without interfering with internal policies used by OAM.
Kind regards
Colin
-
Game/load several flv files on a single Web page with links?
Hello
I am looking for a way to place thumbnails of video clips (FLV) on a Web page and each load a separate video clip in a 'container box' of all kinds via xml or another script that loads the 'necessary' as opposed to all at once. I've seen a few scripts in flash - I was wondering if there was anything available that would be easy to add/remove without flash?
Any input would be greatly appreciated (espaecially looking for examples, I can see how works before construction - the flash version, I saw in Adobe offer, scripts and tools to create, but I couldn't find a way to get an overview before going through the motions...)
Thank you
Jesse
Take a look at RAVE Wimpy Streaming Media Player
Or this MC free Flash Media Player
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/ -
Where can I change the setting for single/double clicking with the mouse
From: brelade
How can I change the option to double click with a single click to open programs with the mouse.
--
Brelade
From: brink
Hi brelade.
You have to go into Options of folders in the control panel (Classic view) or the Tools menu in the Explorer of. Here is a link to a screenshot.
http://www.Vistax64.com/tutorials/40246-single-click-option.html?LTR=S
Shawn
Another response of the community of Windows Vista discussion groups
-
can bind us a single external table with multiple files in OWB 11 g?
Hello
I wanted to ask if it is possible to link an external table with several source files in same or different places? Or an external table must be bound to a single source file and one place.
Thanks in advance,
Ann.
Published by: Ann on October 8, 2010 09:38Hello Ann,.
Can you please help me by telling me the steps to achieve this.
Right-click on the external table in the project tree, from the menu choose Configure.
then open right clock the node data files dialog Configuration properties and choose from the menu - Create
you will get a new record for the file - name of file data propertyAlso the link of the OWB user guide
http://download.Oracle.com/docs/CD/B28359_01/OWB.111/b31278/ref_def_flatfiles.htm#i1126304Kind regards
Oleg -
Since I downloaded the new update, my homepage loads twice and I can't seem to be able to solve this problem. I then replace the second with a bookmark link to go somewhere else. Wasting time.
Bookmark it;
Mozilla search reset {web link}
This module is very simple: when installing, it backs up
and then resets your search and home page preferences
at their default values and then to uninstall. This
affects the search bar, search bar URL, and home
page.
Maybe you are looking for
-
Drive external hard drive does not appear under "devices."
Hello I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update. I use a MacBook Pro (end of 2013), currently running MacOS Sier
-
Firefox crashes several times - fees install on Windows 10
I received a new computer with Windows 10 and installed Firefox 40.0.2. Even with this new facility, I have known many frustrating crashes. I can always trigger an accident trying to inspect an element or when trying to install Firebug. To solve the
-
I have the Alcatel Onetouch fire, and as we know, there is a button (equipment) home. But it seems that there is a soft button at home, I don't need. How can hide this additional button at home.
-
Why Firefox randomly makes a page back without user intervention?
If you use Firefox, the current tab randomly is back to the previous page. Often, this happens when the user is not to take any action, even if it will occur during data entry or clicking on a button.
-
Screen goes very dark on Satellite 3000 - X 11
This problem occurs while working and when starting computer, not always but now more often. Initial intact Toshiba screen, but then the screen goes very dark. See just the Windows icon but it's too dark to work on. Anyone know if it's fixable?