A solution for cache reset randomly in Windows 8/8.1

Similar Questions

• Will be a Windows 7 upgrade works for me, or is there a solution for Vista

  Due to a full HARD disk, I cloned it on a new larger HARD drive. Windows will now do no updates. Copy from one place to the other often hangs and needs to reset to do something else. I tried a re installation of Vista, but starting to think than to go to Windows7. An update will work which is obviously a Vista with something missing? I saw that I have Live and he began to make my address book, that he was advised that an update is available, but it also stops. Can I go to 7 or is there a solution for Vista

  Mike

  An upgrade installation can fail if there is already a problem with Vista.  It is better to solve the problems you are having with Vista first.  First see if you can solve the problems of update.  Visit the Windows Vista update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=no

• I don't know what error code I get when trying to install KB974417, KB963707 and KB939683. I found a solution for KB974417 which is to install the latest Windows Installer. What about the others? KB963707 and 939683.

  I installed Windows Installer 4.5, because the support microsoft inform me that I have the latest Windows Installer Package to install KB974417. But I can't find solutions for KB963707 and KB939683.

  To get the Windows error meets during updates, you can try to read the Windowsupdate.log file using the http://support.microsoft.com/?kbid=902093 article

  Also try the few measures available under article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602 if they relate to your error.

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• My solution for No Audio - drivers Conexant and Windows 7 x 64

  My son and I have the laptop L2000 comes with 32 bit XP and used the audio Conexant chipset. I had been using a SB Audigy PCMCIA card so I don't know when the Audio is really off. However, he noticed when I upgraded his PC. I went through different forums looking for 64-bit Windows 7 for Conexant audio drivers but nothing helped. Microsoft and Conexant both said that HP should provide the drivers. By the way HP, the Conexant site says that they provide no drivers, although they make the chipsets 'at the request of the OEM." Another post said that HP will not have to provide these drivers for Windows 7. The HP solution for my model and Windows 7 has been the "HP Software Advisor" who was 67 MB and totally unnecessary. It seems that it is a very common problem. In any case, here's what you do:

  First of all, you need 2 files that come quite ironically HP, they are SP35558.exe and SP35558.cva they contain drivers for Vista x 64 Conexant. (Later, I found the 32-bit drivers and the procedure should be very similar, except that the files are SP34789.exe and SP34789.cva). Type the following command in your browser address bar ftp://ftp.hp.com/pub/softpaq/ to half way down you will find the subdirectory with these files. Just right click on them and save it on your desktop.

  Double-click on SP35558.cva and tell Windows to use Notepad to open it. Scroll to halfway down to "[Operating Systems]" and after 'WV64UL = OEM' insert:
  W764HB = OEM
  W764HP = OEM
  W764PR = OEM
  W764UL = OEM

  (For systems 32-bit using W732HB = OEM, etc.).

  I then went up to about 10 lines "[system information]" and added

  SysId3 = 0 x 3091
  SysName3 = HP Pavilion ze2000 series
  SysId4 = 0 x 3096
  SysName4 = Compaq presario M2000 series
  SysId5 = 0 x 3097
  SysName5 = series Compaq Presario M2000
  SysId6 = 0 x 3097
  SysName6 = series HP Special Edition L2000
  SysId7 = 0 x 3093
  SysName7 = series Compaq Presario M2000
  SysId8 = 0 x 3093
  SysName8 = series HP Special Edition L2000

  I got this information from another cva file on my PC to C; / / swsetup, this is the directory where HP updates by default.

  After modding the cva file, I taped C; / swsetup/sp35558 /.

  Then, I run the SP35558.exe file. He failed the first time, I missed a line in my cva file. However, I then manually installed the Conexant drivers as follows and voila I had sound, beautiful crisp clear sound.

  "" In the Device Manager, right click "Multimedia Audio Device" under the heading 'Other' and choose 'update driver' then ' Browse your PC "and"choose from a list. Select "Audio, audio and game controllers", and then Conexant 'drive '. Navigate to C:/swsetup/sp35558/and open "cp6308Ba.inf" (don't forget 64-bit). Now click 'OK' and ignore all the warnings on the incompatibility, WHQL, etc.. Give her lots of time, you might think, you are in a loop, but you're not. Congratulations, you've completed.

  I thought that to recompile my answer and then mark this thread as resolved since it was not a post about a problem, but rather how I solved a very common problem that can be beneficial to others.

  My son and I have the laptop L2000 comes with 32 bit XP and used the audio Conexant chipset. I had been using a SB Audigy PCMCIA card so I don't know when the Audio is really off. However, he noticed when I upgraded his PC. I went through different forums looking for 64-bit Windows 7 for Conexant audio drivers but nothing helped. Microsoft and Conexant both said that HP should provide the drivers. By the way HP, the Conexant site says that they provide no drivers, although they make the chipsets 'at the request of the OEM." Another post said that HP will not have to provide these drivers for Windows 7. The HP solution for my model and Windows 7 has been the "HP Software Advisor" who was 67 MB and totally unnecessary. It seems that it is a very common problem. In any case, here's what you do:

  First of all, you need 2 files that come quite ironically HP, they are SP35558.exe and SP35558.cva they contain drivers for Vista x 64 Conexant. (Later, I found the 32-bit drivers and the procedure should be very similar, except that the files are SP34789.exe and SP34789.cva). Type the following command in your browser address bar ftp://ftp.hp.com/pub/softpaq/sp35501-36000 to half way down you will find these files. Just right click on them and save it on your desktop. (The 32-bit files are in a different subdirectory to ftp://ftp.hp.com/pub/softpaq/sp???-?)

  Double-click on SP35558.cva and tell Windows to use Notepad to open it. Scroll to halfway down to "[Operating Systems]" and after 'WV64UL = OEM' insert:
  W764HB = OEM
  W764HP = OEM
  W764PR = OEM
  W764UL = OEM

  (For systems 32-bit using W732HB = OEM, etc.).

  I then went up to about 10 lines "[system information]" and added

  SysId3 = 0 x 3091
  SysName3 = HP Pavilion ze2000 series
  SysId4 = 0 x 3096
  SysName4 = Compaq presario M2000 series
  SysId5 = 0 x 3097
  SysName5 = series Compaq Presario M2000
  SysId6 = 0 x 3097
  SysName6 = series HP Special Edition L2000
  SysId7 = 0 x 3093
  SysName7 = series Compaq Presario M2000
  SysId8 = 0 x 3093
  SysName8 = series HP Special Edition L2000

  I got this information from another cva file on my PC C:/swsetup / (this is the default for HP updates directory).

  After modding the cva file, I taped C; / swsetup/sp35558 /.

  Then I ran the SP35558.exe file and voila I had sound, beautiful crisp clear sound.

  The use of the CAL file is to streamline the installation of the driver and that's kind of cool if it works. If you can't find it, you don't succeed the first time, or you don't want to not bother with modding anything, don't worry, the installation manual will work for sure.

  Run sp35558.exe to extract all and let write off. Then go to Device Manager and update driver manually as follows:

  In Device Manager, right click "Multimedia Audio Device" under the heading "Other" and choose "update driver" and then "Browse PC" and "choose from a list. Select ' Audio, audio and game controllers', then 'Conexant', then 'drive '. Navigate to C:/swsetup/sp35558/and open "cp6308Ba.inf" (don't forget 64-bit). Now click 'OK' and ignore all the warnings on the incompatibility, WHQL, etc.. Give her lots of time, you might think, you are in a loop, but you're not. Congratulations, you've completed.

  I hope this helps.

• My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  Hi gregs5153218,

  You can't the PDF files to be changed with Acrobat Reader DC.

  You must have the Acrobat application to edit PDF files using Acrobat. Edit PDF files.

  Kind regards
  Nicos

• After the upgrade to windows 10, my dreamweaver has stopped working. Could someone give me a solution for this? I really need DW!

  After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.

  Could someone give me a solution for this? I really need DW!

  Problems during the installation or opening Dreamweaver on Windows 10

• All possible means for the conversion of P2V Windows 2008 R2 (even with workaround solutions?)

  We have several production servers, that we have recently upgraded to Windows 2008 R2, only to discover after the fact that VMWare Converter currently does not support convert a physical machine to a VMWare image. The servers are actually images of Hyper-V, but since there is no way to convert the computer virtual Hyper-V to VMWare, we have always used the P2V conversion with our Windows 2008 Server (not R2) without problem.

  Its imperative that we find a way to do this and I was hoping to see if anyone has found any workaround for this problem.

  We would prefer not to have to buy another product for that (i.e. using Acronis or Symantec Backup), as one would expect VMWare to support it eventually (even if it is the only option, we will have to examine it). We simply need a workaround solution for us until they do.

  Thanks a bunch!

  Hello.

  Have you tried the StarWind V2V Converterfree?

  Good luck!

• Program for caching disk ssd Y580

  Currently I have my OS installed on my 32 GB SSD - drive on the lenovo y580. Recently, I discovered that I shouldn't have installed here, but the HARD drive disk and use the SSD to cache. What program should I use for caching because Y580 is not supported RAID. And when my OS on the SSD, should I just re - install on the HARD disk drive. But I have some personal data like pictures, movies, music, and documents on the HARD drive. If I install windows then I lose them. They are important to me!

  Hello

  Here's the solution provided on article

  You will need to erase the SSD partitions, so you will need to have your operating system installed on the HARD drive first.

  To resolve this issue, first delete the primary partition on the mSATA SSD and then install the ExpressCache software. The ExpressCache Setup will automatically create the necessary partition cached on the mSATA SSD.

  1. Open the Start Menu, type DiskMgmt.msc and press ENTER to start the Disk Manager.
  
  
  2. At the bottom of the disk management window, identify the mSATA SSD device. The mSATA SSD 16 GB is 14,91 GB. The mSATA SSD 32 GB is 29,82 GB.
  
  
  3. The mSATA SSD can contain a 'Data2' score with a D: or E: drive letter. If so, check for any saved files on the device. If the files exist, you can move them to the C:\ drive.
  
  
  4. Delete the primary Partition on the mSATA SSD by right-click on it and choose 'remove the Volume '.... "in the menu that appears. Click 'Yes' to confirm the action.
  
  
  5. There are at least 29GB of unallocated on the mSATA SSD space.
  
  
  6. Download ExpressCache from the following link that corresponds to the installation of Windows 7 (32-bit or 64-bit):
  
  
  • 32-bit Windows 7
  
  
  • 64-bit Windows 7
  
  
  1. Install ExpressCache by double-clicking the installation file downloaded in step 6 and follow the on-screen instructions. Reboot as prompted.

  Best regards

  Solid Cruver

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

• Recommended the Directory Structure of shared storage for deployment of enterprise on Windows environment

  Hello

  I need to install FMW on windows with high availability environment using the storage that is shared in the following way:

  3 windows 2008 R2 servers servers:

  Host1 (Server Admin): gale servers (Server Admin) and EM

  host2 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

  host3 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

  
  

  Host3 will be Host2 high availability on each managed as cluster based server
  

  
  

  the question is how to design the structure of directory on windows environment, I need best practices
  

  I found in the Linux directory structure "Enterprise Deployment Guide for Oracle WebCenter Content" as follows:

  So how do apply on windows

  

  Hello

  Thank you! All the best. Be careful in choosing to shared storage.

  # If your shared file system accessible via CIFS, SMB or Samba, you may search and/or performance indexing and corruption problems when you use the Verity search engine (not supported in 11g).

  # If your file system shared accessible via CIFS, SMB or Samba, you should disable opportunistic locking (oplocks - data client-side caching) of the file system as it might interfere with the normal operations of Content Server. With solutions for storage network (SIN), the performance of the file system may be closely related to oplocking (data caching client-side), which disables the opportunistic locking can cause performance problems. Please plan your architecture accordingly.

  Please feel free to correct if you get your answer to other purposes.

  Thank you

  Amey

• I find that whenever I'm trying to rename an invisible layer (in Photoshop CC 2015), Photoshop stops working. Apart from ensuring that a layer is visible before you rename it, Adobe (or anyone) has a solution for this?  Thank you.

  I find that whenever I'm trying to rename an invisible layer (in Photoshop CC 2015), Photoshop stops working. Apart from ensuring that a layer is visible before you rename it, Adobe (or anyone) has a solution for this?  Thank you.

  Hi df.studio,

  Please reset the Photoshop preferences and try again.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Related link: functions of files preference, names and places. Photoshop CS5

  If not, let us know error code related to the crash.

  Go to the control panel< event="">

  Once that event viewer is open< click="" on="" windows=""><>

  Search the last error and let us know the details and general information.

  

  Let us know if it helps.

  Kind regards

  ~ Mohit

• I am told my Firefox version is outdated but on Firefox said I'm updating version 39.0 + solutions for older versions do not work

  I run Firefox version 39.0 but told me that my version of Firefox is outdated even by the Mozilla site.
  About Firefox said I'm updating version 39.0 + solutions for older versions do not seem to work.
  I tried to download the full installer and run it, https://www.mozilla.org/firefox/all/
  (he was supposed to detect my existing installation and update).
  Then reopen Firefox and go to this site.
  Yet this site advises again once update me my version of Firefox...
  I would appreciate your help.
  Keep up the good work,
  Thanks in advance,

                                 Gunter Von Breslau
  

  If you couldn't fix it by resetting the custom entries general.useragent subject: config as described in the article above, then you might also Update firefox that should address this issue as well...

• I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  You have a corrupted user agent which identifies you like Firefox/3.0.11

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Satellite L500D Pro - Solution for drivers HD4100

  Problem:
  After a clean install of Windows 7 64-bit on the of Satellite L500D Pro vor of the Radeon 4100 drivers cannot be installed.

  Solution:
  Just take the 32-bit Windows 7 Toshiba Support drivers and everything works fine.

  I spend my afternoon to find a solution to this and although I found many people with the same problem, there is no answer except 'no install windows from the CD of restoration' - which is absolutely no solution!
  Then I tried everything that I could imagine and take the 32-bit package has been the salvation.

  It should also work on other laptops with the same graphic card.

  Hi Eroghor,

  Thanks for sharing this information with us. It s very useful! :)

  But why is no recovery disk? It of best that you can do. Pick you up at the factory with all the drivers and tools. So you don t have any problems with the installation of the driver, and you can have fun with Notepad. :)