a sound signal and the screen goes black after start
Hi, I have a problem with my HP G62 a38se laptop pc.when I start my pc after startup pc saying not to answer with 3 beep sound(beep...beep...beep).after it displays a black screen and goes restart... plsss help me for this
You are able to access UEFI to perform material tests?
Perform the start-up and testing of the long system. Please post your results here.
Purchased 2008 HP TX2000 Windows Vista 32 bit 2 GB memory
Laptop trying to load Windows but fails when the lines are moving on the screen - the screen is black or with lines across and the computer is frozen
We put an adapter on the hard drive, it is difficult to see just looks like it's all a part, you should be able to just pull the part plastic on the pins and that will let you plug your new case, I've experienced the same thing about 3 years ago, it really seems that it's just one piece... It should first come fairly easily, simply pull... Please let me know if it works for you
Here's a photo I hope this can help, if it please click on accepted solution or glory, but only if I helped.
OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.
I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.
However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do
Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?
You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
What operating system you use on your L405D satellite?
To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.
In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.
If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
Explain your very detailed problem. I think that everything can be clarified then. :)
I have a laptop of s3000 - x 4 satellite.
swiched top upward start then the screen goes black, I can just do the display to see loading, windows
This happens even if I can get it to boot in safe mode, or when I enter setup.
If I'm lucky, I have a minute of commissioning until the display changes. and as soon as I restart, I'm square.
can anyone help? If it is a component, it is easy to find and replace?
see you soon
Have you tried to connect the external display?
If this is not the case, try it. Also check out the switching between display devices with the FN + F5 key combination
If this does not help, I would pick up the laptop with the Toshiba Recovery CD supplied. Also try to improve the shape of the Tosh site graphics driver.
But if it won't work and you can't see anything on the screen so I guess there must be something wrong with the hardware. In this case only the ASP in your country is able to help you.
I can start my computer very well, he goes through the bios and connect simply awesome. But when I connect to my computer (click on my icon, enter the password), the office and the screen goes completely black apart from my mouse is showing and answer. My keyboard works, but just does not meet all the shortcuts and there is a way I have to go on the Control Panel, but I can't open applications or files of it.
I can alsostart in security mode and works perfectly; Apart from theres no internet.
I checked inside my computer and nothing burned or destroyed.
If you are normally able to logon in safe mode, this means there is a demand of load in normal mode, interfering with the Explorer shell. Safe mode, click Start and run regedit. Expand the branches to reach this key:
Cliquer click the button, then find the userinit string in the right pane. Double click it, replace the contents with:
be sure to include the comma at the end click ok, close the registry editor and restart the system normally.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.
By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.
We are working to solve this with the creation of our Tablet UI.
My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.
I have disabled all parameters almostly, screenshots here:
I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.
Try disabling the startup of Windows 10 hybrid - you can do the following.
Open settings and select System. Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.
In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '. Click on the button Save the settings, close all open windows, and then restart the laptop.
DP - K
Currently, I tried to install SP2 for my laptop (Windows XP pro) R100. The end of the installation procedure I restarted the system, as requested. The windows logo appeared, then the screen went black and the only thing I could see was the mouse cursor.
After several reboots, the situation did not do better. I tried to go on safe mode, but I had the same (only this time the black backround was typical registration of safe mode on the sides). I will perform a system restore without having to install SP2, but the fact that I am on a DSL connection most of the time very important SP2 installation.
I would appreciate any solution to this problem.
Thanks for your time.
As far as I know sometimes a few utilities and drivers must be updated after installation of the service pack 2 Microsoft.
On the Toshiba driver page I found a backgrounder update of Microsoft Windows XP SP2 that contains a few s information about the utilities that must be updated.
However, additional I found a lot of new drivers for R100.
I think you should also try to update the old drivers as driver utility and the graphics card chipset.
Eventually, it helps.
2 #1 monitor displays a normal "office" and then turns black 5 to 20 seconds after turning upward. Sometimes displays 'no signal' on the way to black. Power Off then on restores it for another 5 to 20 seconds. Discount to zero has the same effect
This config double montor was working before?
In the resolution of the screen, the monitors can be detected?
Swap monitor connections on the PC, the same monitor fails then?
Check that all are watching them (removing and reinstalling) cable connections
And or check the monitor on another PC
When you use my laptop I'll hear a little wink (could be in the 5 min or 2 h) as his and my screen will go completely dark or display horizontal lines. This crashes the system. I am unable to do anything. The only way to restart is a strong power down. No idea what is the cause?
The first thing you think when you have lines, etc. on your screen graphics/video drivers are corrupt and we normally recommend that you download the latest drivers for your computer from the website of the manufacturer of your laptop.
But you say that you receive a beep at the moment that the problem occurs, which suggests a hardware problem (loose connection, inverter, backlight connection while your screen is black?).
If it is not corrupted drivers:
If under warranty, contact the manufacturer.
If it is not under warranty, contact a good computer repair workshop, local.
See you soon.
Have loaded slides and music for Windows Live Movie Maker and I'm reviewing before creating the movie. At one point, the music stops playing, but still slides. If I stop and move the cursor over a photo and continue to play... no music will play and darkens the display great movie on the left. Pictures always appear on the right. Any thoughts?
Maybe it's a compatibility issue with the format of the music file.
The project plays correctly if you delete the file from music/s?
After the re-construction of my computer with
a new card mother MSI (AMD Athlon II X 2 with 2 GB RAM DDR3 1066) and a new 500 GB hard drive and using only the edge graphics I can not finish installing Windows XP.
Error code 80096001 you can see
some screenshots I took during the installation procedure. I have an original OEM licensed Windows XP CD with SP2 which I can install it easily on my old system.
A quick google on the message final error "Setup could not install the product catalog" this product like the first:
If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog
Update CC 2014 on the Mavericks. Now, I get the message "your computer restarted due to an error". When I try to reboot, my macbook freaks out and the screen goes black or I get pink and blue pixels. Help!
I have no idea what to do now. I have a MacBook Pro running OsX 10.9.5
uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then restart your computer.
If that solves the problem, install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe
Test your computer again.
If no problem, install a program of cc using the desktop application.
Restart your computer.
If no problems, proceed with the installation of programs cc.
IMac was on but in the sleep when had power cut. After feeding back immediately tried to start over, but I just black screen that could hear the startup chime, and hear the work of the machine. In collaboration with el captain. I have mouse and wireless keyboard. Any ideas?
Original title: black screen.
dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!
Glad to know that you were able to resolve the issue and thank you for sharing information.
Maybe you are looking for
I have an older Dell laptop, Latitude D800. The hard drive is 60 gig. Can I put Vista on it? How much space does Vista take?
Hello I was download songs on a CD, but when I put it to play on any stereo system, it does not at all, he plays only in the computer. I thought that the problem could be with my stereo systems, but it's not because I've played other types of compute
Hi guys Please help me the EditField setting font color. I'm doing a screen context menu custom for the credentials of the user with a white background. The problem is that when I put background color to white effects all items included in cluding ed
I am trying to open a raw for the first time. The extension is CR2 format. The error I get is: ""could not complete your request because it is not the right kind of document.""How will I know that I have Camera Raw plug installed?
Hi allI had incompatibility number n/b dba_indexes and dba_segments index. Please find the details below.SQL > select SEGMENT_TYPE, count (*) from dba_segments where owner = group 'VIM_SCH01' of SEGMENT_TYPE.LOBINDEX 11LOBSEGMENT 11TABLE 68INDEX 52->