A SSD from OCZ Agility 3 disc works with a dv9700T? Mine is not recognized by the BIOS.

I bought a 120 GB OCZ SSD Agility 3 disc to install in my laptop the dv9700T CTO.  The drive is not recognized by the BIOS when it is installed in the Bay of 1 or 2, but is recognized when connected via USB as a secondary drive.  The drive works fine in a different computer, so I know the drive works.  There seems to be a problem with the SATA (ICH8) controller.

Someone at - it any information on that?  Would love to get the drive works in my laptop.

Thank you.

Lloyd

If you have a HARD drive installed in the secondary Bay and the OCZ SSD in the first Bay, the dv9700t starts and works very well.

Lloyd

Tags: Notebooks

Similar Questions

  • Satellite L50 - B - 2 8 - new SSD is not recognized in the BIOS settings

    Hello

    I just bought a new laptop Toshiba Satellite L50 - B - 2-8 and I also bought Samsung SSD 850 evo 250 GB.
    When I try to install the SSD drive rather my drive HARD, the BIOS show 'none' in the category of SSD/HDD (BIOS not recognize the SSD).

    Please help me.
    My bios version is: 2.00
    someone told me that I have to downgrade my version of BIOS to 1.2V and then the BIOS recognize the SSD drive, so perhaps someone here can send me a download link for version 1.2 of my model L50 - B - 2-8.
    Thank you

    someone told me that I have to downgrade my version of BIOS to 1.2V

    And who? I mean you are sure that this person was right?
    From my point of view of the few there is no reason why beginning version BIOS should recognize the SSD and the latest version of the BIOS is not...

    But BIOS v1.2 for series Satellite L50 - B - 2 8 PSKTQE there is no v2.0 (at this time) is the latest version and previous versions of BIOS are not available for this series.

    Also, I guess you must slimply check different SSD drive... it might be possible that the other SSD drive would be recognized correctly.

    By the way: I am owner of Evo 850 SSD drive and as I remember, I had to update the firmware of the SSD drive to use it correctly in my other laptop (not the Toshiba device)

  • HP Pavilion dv7-6004ea: new SSD not recognized in the BIOS

    Hi I have a want dv7 and is currently using a 700 GB drive HARD However im upgrading to an SSD

    I bought a Sandisc SSD PLUS 120 GB, I cloned the HDD to the SSD, I see partitions

    in windows Explorer when im running HDD, but when I try to boot from SSD I get an error

    error code (3F2) I ran diagnosis but no result without error of ideas? Thank you

    If you use the Apricorn software and a usb cable to SATA it should work.

    I did it several times without problem, except when I got an SSD that was a problem.

    Replace the original hard drive in the notebook.

    Download the latest version of the firmware from the manufacturer to the SSD and install it.

    Once you have done this, try cloning of the OS for the SSD, reinstall it in Notepad and start on the SSD.

  • Qosmio F60 - new SSD now will not appear in the BIOS or at the Win7 Installation

    I recently bought a new OCZ Vertex 4 128 GB Solid State Drive to upgrade my PC laptop Toshiba Qosmio F60 with.

    After that I installed it first of all, it has been detected immediately in both the bios and during the installation of Windows 7. However, for some reason any approximately 40% of the way through installation, the computer restarts and the drive has disappeared since the BIOS all together and now, after several reboots it does not always detect!

    Note that I already have the latest version of the BIOS installed on my laptop V2.70

    I'm not sure what I would do here and any help would be appreciated?

    Can you please set BIOS to default settings and check if the SSD is recognized in the BIOS again?
    > Please note that I already have the latest version of the BIOS installed on my laptop V2.70
    In my opinion it is not relevant at all.

  • Adobe Flash Player 11.0.1.152 could not install. Successful installation of Flash Player 11.1.102.62 manual. Flash Player said "Install Complete" However, Flash Player works with Internet Explorer! What seems to be the problem? j.Durk@Verizon.net

    Adobe Flash Player 11.0.1.152 could not install. Flash Player 11.1.102.62 installation manual (32 & 64-bit version) managed after that Ctrl, Alt, delete on the processes tab find firefox.exe * 32 has been active and I finished it. Flash Player installer said "Install Complete" I uninstalled Firefox and Flash Player several times without success. However, Flash Player works with Internet Explorer! What seems to be the problem? [email protected]

    You have probably installed a 64 bit version of Flash for Firefox plugin.

    Firefox is a 332-bit application, so you need 32-bit versions of a plugin to make it work.

    You can find the 32-bit version of the Flash Player installer for a 32-bit version of Firefox here (scroll down to Flash Player (32-bit)):

  • Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?

    Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?

    ^ Why post if you don't have the answer to the question?

    You can get Firefox here 3.6.16.

    http://www.Mozilla.com/en-us/Firefox/all-older.html

  • How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

    Switch issues. Help, please.

    How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

    Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

    -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
    -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
    -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

    Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

    It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

    To save the manual copy and the new hits of the ipconfig/all command output-

    First connect through switch.
    Open a command prompt window (start > run > cmd > OK)
    Type the following lines in the black command prompt window and press ENTER after each line

    echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
    ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

    Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

    echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
    ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
    Notepad '% UserProfile%\Desktop\ipinfo.txt '.
    output

    Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

    You can delete ipinfo.txt on the desktop when you are finished.

  • C7250 connected wireless works with wired ethernet PC but not wireless PC

    C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.

    Can ping the IP of the PC cable but not wireless computers.

    Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.

    When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.

    Firewall is not the issue because I tested with the firewall disabled.

    Any suggestions?

    Thank you for your help.

    I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.

    I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.

    Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.

    I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.

    THE PROBLEM WAS IN THE ROUTER.

    These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.

    I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.

    RESOLUTION:
    The router I was using was a Linksys WRT54GS Ver 1.

    I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.

    I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.

    I checked the firmware on the router worm 7 was the later and pulled up.

    The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!

    I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!

    I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!

    I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!

    Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.

    All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.

    I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;

    THANK YOU FOR ALL YOUR HELP PRINTDOC!

    PRINTDOC BRAVO!

  • Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

    Hello

    I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
    It seems that the built-in webcam is not connected.
    Thank you

    See Sony support site or their forum, this is a Sony webcam

    And no this isn't a feature of device, or something that should appear in the devices & Printers

  • Hi all that I've been a user of cc muse and created 3 versions of storage for office, ipad, phone. Recently I started working with sensitive muse and do not see a possibility to create 3 versions (in one is not good for me). I tried to enter with Fix lent

    Hi all

    I have been a user of cc muse and created 3 versions of storage for office, ipad, phone.

    Recently I started working with sensitive muse and do not see a possibility to create 3 versions (in one is not good for me).

    I tried to enter with Fix lenth (not liquid) but cannot create a version for phone.

    Thanks for help

    Adaptive and Responsive Design are both supported. Please see the discussion here reagent phone or tablet buttons update-no more?

  • I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

    I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

    Hi Bobsirkus,

    The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

    Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

    You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

    Kind regards

    Tanuj

  • I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

    I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

    I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.

  • Trying to work with C4D Lite and get an error on the size of the layer

    Although I worked with AE for a few years, this is the first time I tried to work with Lite C4D and obj. When I try to work with a C4D file I get this error: size of layer must match Composition and use default values for transformation.

    Here are the steps I take:

    1. Create a new comp (1920 x 1080, square pixels)
    2. In AE, file > new > file of Maxon Cinema 4 d
    3. Name the file and it will open in C4D
    4. In C4D: File > merge
    5. Navigate to and select the file OBJ, which appears in the interface of C4D
    6. File > save
    7. In AE (window project): drag the file C4D for the button create new Comp
    8. When I try to do anything with the comp I get the above error.

    Any help would be appreciated.

    You can set the resolution in the C4D render settings. By default, it is set to 800 x 600. Read the help.

    Mylenium

  • Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?

    Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?

    Double click on the sequence imported into the location of the project.

  • HP Pavilion DV6 DVD disc not recognized and the media player does not work

    My HP DV6 is having... issues.  Windows 7.  A little history:

    Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

    Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

    Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

    More?  (Windows Explorer, not Internet) will be often expire or crash...

    I have Norton Internet Security with live update and have yet to have virus problems.

    Any help or questions greatly appreciated!

    To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

    1. Click Start, type regedit in the Search box, and then click regedit in the programs list.

      If you are prompted for an administrator password or a confirmation, type your password, or click continue.
    2. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

Maybe you are looking for

  • update of the iOS 10.0.2 - 0 Bars No. Service

    I have an iPhone running iOS 10.0.2 5. Since I've upgraded to iOS 10.0.2 I got 0 carrier bar in the upper left to left of my carrier (Verizon), which means that I can't send or receive phone calls. I tried restarting the phone, reset my network setti

  • at & t 4g microcell by iMac

    I want to spend my AP extreme and the modem out of my room, but I have an at & t / cisco 4 G microcell, which must be on an ethernet connection to work.  not knowing some of the iMac internet sharing function, is possible to connect the microcell cis

  • Storage is almost full - other space

    I am a user of iPhone 5 s (ios 9.1). It has been over a year that I'm dealing with a serious problem of storage. Although space is available on my 16 GB phone, my phone always says I have 0 bytes left and 11.7 GB used. When I hook it up to iTunes, 'O

  • I got a stop error message on my xp is 0x0000007b and I tried to reboot in safe mode but continues to go round in circles

    my xp fell victim to bsod do not know how is the code stop 0x0000007b ive tried to start in safe mode and last good configuration, but it always goes back to the blue screen and I don't have a boot disk

  • I hate HP from the bottom of my heart.

    I want you to know that I hate HP from the bottom of my heart and upward. I have known so much crap with you and had so many questions with you that it is almost unbelievable. I'm not allowed to rant or speak in a bad way to HP so I'll just say: You