A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

Hello gentlemen,

I can not only save this virtual machine with Backup Exec 2014 for a long time.

They are there was no snapshot in snapshot Manager.

Could you help me?

A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

Hello

I found the solution.

I disabled the JOB BE general relativity.

and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

I did and now there works.

I think that the problem can come from this.

Tags: VMware

Similar Questions

  • Storage test 55 certification vmotion, storage vmotion fails with "Could not lock file" on the virtual machine during storage vmotion

    In my view, that it is a known problem in ESXi 5.5 Update 2 release notes, someone knows a solution yet? This is an excerpt from the release notes:

    • Attempts to perform live storage vMotion of virtual machines with RDM disks can fail
      Storage vMotion of virtual machines with RDM disks can fail and virtual machines can be considered in turned off of the State. Attempts to turn on the virtual machine fails with the following error:

      Cannot lock the file

      Workaround: No.

    VMware support for the record said that the patch will update 3, it is known as an intermittent problem. Finally, it happened to me on the 9th attempt.

  • A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

    I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

    No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

    Hello

    This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

    I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

    Reference:

    snapshot could not be created Details: the specified object was not found.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

    Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

    See also:

    Back up and restore frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

    Back up your files

    http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

    Hope this information helps. Response with status so that we can help you.

  • A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

    Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

    I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

    Thanks for the help!

    Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

    Note: Backup of your hard drive as described in the article.

    How to fix error code: 0 x 81000033
    http://www.PAGESTART.com/win7br0x8100003301.html

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Cannot create a backup, error: "a snapshot could not be created."

    Original title: computer backup

    When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?

    Hello

    The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.

    You don't tell us the size of your D: partition.

    There are between 5-15GBs, is the recovery partition and read more:

    Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

    1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

    F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

    You will need to ask your manufacturer for proper sequence.

    2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

    Also ask them how to make records.

    Your D: Recovery Drive is should not be used for backups, defragmented, etc..

    There are backups on an external hard drive.

    To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    How to save properly:

    If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.

    Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

    All editions of Vista can do backups of files.

    Here's how to back up and restore your files:

    "How to back up your data.

    http://www.wintuts.com/how-to-backup-your-data

    http://www.home-PC-help.com/windowsvistabackup.html

    "How to restore your files.

    http://www.wintuts.com/how-to-restore-files

    This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

    «How to make a backup of the computer in Vista»

    http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

    "How to restore a full backup of the computer.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

    FAQ from Microsoft about backup and restore:

    "Back up and restore: frequently asked questions.

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

    This program must be purchased:

    "Acronis True Image".

    http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

    These are free programs for the protection of the computer:

    "EaseUS Todo Backup free"

    http://www.TODO-backup.com/products/home/free-backup-software.htm

    "Download Backup & Recovery 2012 free FREE!

    http://www.Paragon-Software.com/home/BR-free/download.html

    «Macrium Reflect FREE Edition»

    http://www.Macrium.com/reflectfree.aspx

    See you soon

  • Windows backup error: a snapshot could not be created. Error code: 0 x 81000019.

    Original title: Windows - no system reserved partition backup error

    Whenever I try to back up files by using the backup utility Windows 7, I get the following error message:

    "A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information.
    "Details: the specified object could not be found" error code: 0 x 81000019

    The backup utility starts and says is 'create shadow' fails.

    In the research forums, I find a common solution to the increase in the size / cleaning of the system reserved partition.  My problem is that the system reserved partition does not exist on the computer.  The computer originally had Windows Vista and upgraded to Windows 7 x 86 Ultimate SP1.

    Is it possible to get Windows 7 backup to work without a system reserved partition?  If not, is anyway to create a system partition reserved without wiping the hard drive and reinstalling everything?

    Hello

    Thanks for the update.

    I ask you to answer these questions:

    1. the computer is connected to a domain or a group of House?

    2 NAS hard drive is located on a different computer?

    If the computer is connected to a domain, then I ask that you post this question on the forum of TechNet at following link:

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

    Please get back to us with answers.

  • Windows backup error; A snapshot could not be created.

    Original title: Windows 7 - windows backup - snapshot could not be created

    When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

    I use:

    Windows 7 Home Premium SP1

    processor Intel I5 2310

    8 GB RAM

    1.5 TB of hard drive

    The full message is:

    "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

    Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

    Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

    I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

    System Writer - State [5] waiting for completion

    MSSearch writer - State [5] waiting for completion

    WMI Writer - State [9] failed

    What can I do to get the backup to work?

    Hi Tom,

    I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

    a. on the desktop, press Windows key + R to open the Run dialog box.

    b. type services.msc in the Run dialog boxand press Enter to open Services.

    c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

    d. if the box Startup type is set to Disabled, change it to Automatic.

    e. click OK to close the Properties window.

    f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

    If you receive any errors, please let us know.

    See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

    a. click on the Start button.

    b. Type in the Event Viewer, in the search field.

    c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

    d. in the left pane, expand Windowslogs.

    e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

     

    Please get back to us with the results.

  • Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

    A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

    Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

    The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

    Event logs see the backup error event ID 521

    GENRAL:
    Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

    Details:
    + System
    -event data
    backup time 2010-03 - 11 t 13: 41:53.466000000Z
    Error code 2155348249
    Error Mssg % 2155348249

    Hi Gilles Pelletier,.

    1. check the shadow copy Volume service in the services window. Use the following steps to check:

    i. click on start and type services.msc in the search box

    II. the search for the shadow copy Volume service

    Please let us know the status and startup type. Make sure that the startup type is automatic

    Steps to set the auto services

    i. search for the service

    II. right-click on the service

    III. If the service is stopped and then starts the service

    IV. Select Properties

    v. and in startup type, select automatic

    2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

    3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

    Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get error 0 x 81000019 as a snapshot could not be created.

    Original title: error 0 x 81000019

    as snapshot could not be created. Check the event logs "VSS" AND "SPP" application for more information.

    Details: The specified object was not found.

    Error code: 0 x 81000019

    I wish that I kew how to solve this problem? I need back up my computer!

    Download new backup software help? I have an asus netbook with windows7 starter

    Help, please!

    Installed new hard drive and I have performed successful backup.

  • Can not backup on external hard drive - "snapshot could not be created...» »

    Cannot back up the external hard drive "snapshot could not be created, please check the VSS application log and the PSP" "details - the shadow copy provider had an error" error code «ox81000019» I want to buy a new laptop, but how can I transfer all of the existing computer if I can't do a backup?

    As you go only to transfer data from one to the other files, here's a good option...

    Remove the old hard drive and connect it on the new computer using a USB to SATA connector like this...

    http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=3276554&CATID=11527

    It is a very useful device to have some kicking around when you need to get data on a drive that does more boot.

    You must get permission to access folders on the old disk to the new computer and this is how you do it.

    Download the zip on the site below...

    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

    .. and it is there that find the link to the zip on the site...

    When you run the zip file, it places a new item in the right click menu called 'Take Ownership'

    To use it, you highlight the file or the folder on which you want the property, right click and select take ownership.

    Then a window will appear and many data authorizations through pretty quickly. When permissions have been granted, the window will close and you will be able to easily access data in the file or the first selected folder...

  • SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

    Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

    One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

    More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).


    Does anyone have any ideas as to the cause?

    Thanks in advance for any help.

    Andy

    Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

    The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

    To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

  • Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

    Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

    Scenario is,

    1. smart card reader is connected to the VM with card inserted in

    2 initiate a prompt suspension of the VM toolbar

    3. now to resume the virtual machine by using vmrun command into the host machine

    WS t vmrun start xxx.vmx

    Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

    My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

    Kindly help with this problem.

    Host operating system: Victoire 2012 R2

    The VM OS: win 10 x 64

    Thank you!!

    Dear all,

    I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

    VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

    For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

    ~ Surendra

  • VMware vCenter Server Appliance 5.5 Active Directory domain are not under permissions

    Hey,.

    I use VMware vCenter Server Appliance 5.5.

    All Services are running correctly:

    web.PNG

    I configured tge under authentication to Active Directory Service:

    1.PNG

    But when I try to give permissions for groups and users to the AD.

    But it is not listed in the vsphere Client and WebGUI

    web-domain.png

    esx-domain.png

    Can someone help me solve this problem?

    Are there any newspaper I can verify or any idea to check this?

    You will need to go to your SSO Configuration and set your ad as default domain.

    Once you do this, it will be displayed in the list.

  • Performance metric power group do not show anything on the virtual machine

    Hello

    I have a small question about the metrics of power Group found on the side of the virtual machine in the charts of perf ahead. It shows only 0 for usage.

    If I'm in the same group of metric on the host, it shows the values.

    do you know why it does not show anything on the virtual machine. is a group of metric that is not usable for virtual machines?

    Thank you very much

    Eric

    You have a support contract in place? Otherwise, I can connect this with them for an official answer... If that helps?

  • How to check the file for the virtual machine size Esxi shell

    Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.

    Have you checked "ls-lh', it will provide information as the attached screenshot." "

Maybe you are looking for