a tab display

Similar Questions

• Max 8 tabs display. FF 3.5 shows up to 20 tablets at the same time.

  In FF 3.5 according to the max 20 (in my case) config tabs displayed until I have to use the left/right arrows to scroll. I tried to put up in FF 9.0.1 as well and failed miserably.

  A that has been deleted or is it just not possible? I need 12-15 tabs open ath even time and don't have the time to always use (due to the workload) arrow keys to the right at the end tab or early 'find '.

  Please point me in the right direction to solve this problem.

  Kind regards

  Axel

  • Custom tab width: https://addons.mozilla.org/firefox/addon/custom-tab-width/

• This may be a very stupid question, but I don't have the "button new tab" displayed on my tab bar. Can you advise me how can I enable this feature? I've searched around, but I am unable to find any ifo. on that. Thank you, Terry

  I just want to know how to get the "button new tab" displayed on the tab bar.

  Try this:

  View > toolbars > customize

  and see if the 'New tab' button is there. If this is the case, make it slide and put it anywhere you want.

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

• the Task Manager shows not informatiom, without tabs displayed.

  now when the Task Manager opens it show only running programs.  without tabs displayed to watch the performance or graphics displayed.  I tried to come back when it worked, but it was not fixed.  How can I find the task to its normal mode Manager?

  Hello

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window.

  To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

• HP 7 voice tab-HSTNH-1407V: HP 7 voice tab display lost

  Mr President.

  I buy HP 7 voice android tab go online before 1 year.  Now he lost falldown of my son's hand and its display. I am alive palakkad, kerala and transfer computer center at your service through my friend in Trivandrum kerala.  They say it's an old device so difficult to repair, also say try of it.  Today they call my friend and can not say service.  What I do with it? Please give me the necessary advice.

  Hello! @unniperumpulav, thank you for visiting the Forums from the HP Support!

  I understand that the shelf fell and got screen broke and you need to be repaired.

  I'll send you a private message with the phone number please contact support to get the connected tablet.

  I hope this helps!

  See you soon!

• I tried to view my tabs on other computers and received this message: XML Parsing Error: undefined entity location: on: sync-tabs line number 7, column 1: the window id = "tabs-display" ^ How can I fix?

  "Error message has been: XML Parsing Error: undefined entity location: on: sync-tabs line number 7, column 1: window (weeks =" "3 =" "4 =" "5 =" "7 =" "< =" "^ =" "a =" "Add - on. =" "it y =" ' am = "" a = "" and = "" are = "" avg = "" believe = "" time = "" but = "" impossible = "" some = "" computers = "" firefox = "" for = "" I = "" I = "" id = 'tabs-view' in = "" installed.. = "" it = "" months) = "" = "" on. "" "" "" "" = "" or = "" other = "" p = "" paid = "" remember = "" running = "" sometimes = "" sync = "" tabs = "" version = "" look a = "" was = "" we = "" some = "" when = "" windows = "" worked = "" > < / window > "

  Hello!

  Can you give us some details? When this message display? Is in your phone or your computer? What is your language? More information you can give us the best.

  You use the add-on and Firefox 4? If so, I'll ask you to disable and remove the add-on: Sync is now part of the Firefox browser and you don't need the add-on. [https://bugzilla.mozilla.org/show_bug.cgi?id=644894 some users solved this problem by uninstalling the add-on.]
  ]

• I can't find the tab display to Zoom in and out! My small got policy and I do not know how to enlarge without zoom!

  My policy on Facebook got suddenly very LOW. In the past, when this happened in Firefox, I simply went to the bar and clicked on DISPLAY and then zoom in or out. NOW, there is NONE of the old wanted and loved tabs at the top of the new horrible page. WHERE is the DISPLAY tab or the zoom FRONT and ZOOM back tab?

  Usually, you have the orange Firefox button or the classic menu bar, but not both at the same time.

  You should be able to switch at the back of this way:

  If the classic menu bar is not displayed, press the Alt key to display it, and then use

  View > toolbars > Menu bar

  to make it persistent. It should replace the orange Firefox button. To switch back, uncheck the box

  View > toolbars > Menu bar

  Does it work?

  ---

  In addition, you can zoom in now the CTRL key and scrolling your mouse wheel. It is an adjustment of finder, but can be more difficult to control.

• Each tab displays a "Connecting" title... "any time that a web page is fully open. Reinstall Firefox 4.0 temporarily fixed this problem, but it is up to "connecting...". "after you restart the PC. What has gone wrong?

  System:

  • Windows XP Home Edition, version 2002, service pack 3
  • Compaq Presario desktop computer
  • AMD Athlon XP 3000 +, 2.16 GHz

  Problem:

  • Installed Firefox 4.0, worked well with tabs showing their titles on the right, such as "CNN."
  • After the PC is rebooted, all the tabs showed 'connection '.... "all the time for all the sites I've visited. All web content displayed correctly.
  • Re-installed Firefox 4.0. All tabs showed their titles just yet.
  • After the PC is rebooted, all the titles returned to 'connection '.... "all the time again.
  • Repeated re-Setup again, the problem came back after rebooting the PC.

  I too have this problem and I guess that's the tabrenamizer add-on. The only solution I've seen is to disable this add-on, but I rely on this add-on. Has anyone found any difficulty in this?

• HP Slate 7 voice tab display Android icon after I tried the update of KitKat candy

  Hello

  I had an Android update information on my HP Slate 7 voice tab to update the version of KitKat candy. Once I followed the instructions on the tab got hangd and displays the icon of Android.

  I tried the instructions online to restart, but to no avail as by pressing the two buttons at the same time: volume upwards and downwards with the power off buttons and release them as soon as the hp icon rises.

  It did not work.

  Any help with this problem?

  Kind regards

  Ravishankar Rai

  As mentioned in my initial response,

  If this does not resolve the issue, please call our technical support: Hotlines all over the world. 

  Thank you.

• Make controls/indicators in all the tabs display updated even if not visible?

  I have a Labview VI simple enough that I need to run in a loop of 10 ms. Currently, I can't get it runs at 17 m, there a RS422 with send and receive a message each 10 m I have a lot of troubleshooting indicators on a Debug tab. I wonder if these indicators are updated even if they are not on the currently displayed tab. If so, changing the property node 'visible' to all of these indicators will speed up execution?

  Thank you

  Well, there are other things, like putting your reading of the RS-422 in another loop or passed the data read in the transformation of producer/consumer .  Without seeing the actual code, it is difficult to give advice more.

• the tabs displayed when the icon is selected

  When I select an icon on the desktop, it displays a second tab (google) as well as the tab selected how eliminate the unwanted google tab?

  Hi Robert,.

  Thanks for posting your query in Microsoft Community.

  • Icon associated with a type specific files or folders even are you referring?

  This could be due to any dispute of third party software or virus on the computer. Try these steps and check.

  Method 1: Start the computer Safe Mode and check if the problem persists. If the problem does not persist in safemode, turn on your computer in a clean boot state and check.

  Step 1: Start the computer in Mode safe

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you are using.

  a. when you press the power button, hold down the SHIFT key when you click the restart button.

  b. the next screen will present you with three options. Click on Troubleshooting.

  c. then hit Start Windows the following screen parameters followed Advanced options.

  d. your PC will now be restarted to activate the advanced settings, which include Safe Mode as well.

  Step 2: Put the computer in a clean boot state in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Upgrade to CF11: cflayout tabs displays scroll bars

  After the upgrade from ColdFusion to ColdFusion 11 10, vertical scroll bars are now appear in cflayoutarea.

  We use ColdFusion.Navigate to send data and update a cfdiv located in cflayoutarea.  In the submission, the cfdiv shows the new data, as planned, but the user must scroll down on the tab to display the data.

  I tried to set the height style: 100% on cflayout and cflayoutarea.  I also tried overflow: visible.  I also tried the overflow of cflayoutarea attribute, but it is ignored.

  Any help would be appreciated.

  Thank you

  Ron

  Ditching the tag cflayout and adoption of jQuery tabs solved our problem. Thank you.

• Spry tabs display is no longer after download

  I was recently done on my site and had created a spry tab to use for 4 different forms.  Now when I view the page, the tabs are not displayed, but the four forms are all on one page.

  I remember seeing in split view < / div > out next to my view presentation layout and I thought it was a div added and deleted.  My guess is that why my form is no longer shows the tabs.

  Any help on where I should add the < / div > back would be VERY much appreciated.

  
  This is the http://www.munchkinsplace.com/custom-quote-form.html page

  I deleted all the content of each tab and created a new page and inserted a new Spry tab to compare the code but I'm still not sure what is different.  It seems that my divs are correct.  If I'm missing what is obvious?

  Here is the link of the page

  • Hair Bow
  • Hair Bow Holder
  • Tutus
  • Layers cakes

  Tab 1 content

  Tab 2 content

  Tab 3 content

  Tab 4 content

   

• Problems of a tab display display and a set of controls "global" in the same dialog box

  All,

  I would appreciate any help you can give me with this.

  I would like to see a tab_view in a dialog box and, above it, a line of commands that apply to all information in all tabs rather than just in the current tab. I can create the tab_view and post it successfully on its own.  I can create the line of control and display successfully on its own.  When I try to view the display of control and tab_view, I get the dreaded "?: 0: attempt to call method 'hierarchyCreated' (value zero)." error.

  Here is the code snippet:

  local content = {}

  Table of contents [1] = controlRow

  Table of contents [2] = vf:tab_view (viewItems)

  {LrDIalogs.presentModalDialog}

  -happy = vf:tab_view (viewItems), - works

  -content = controlRow, - works

  -content summary = [1],-works

  -content = contents [2], - works

  Content = content, - fails

  }

  Anyone can shed light on what I'm doing wrong?  Thanks in advance.

  John

  content must be a view.

  i.e. content = vf:view (content) should work.

  (even as content = vf:column (content))

• WebHelp Navigation tab display closed?

  Hello world
  
  I want to display X 5 webhelp with this navigation management game, but with all closed tabs. The current page for webhelp layout settings do not seem to allow this, although layout HTML Help does not provide this option. I already know that I can view webhelp without the all in fact navigation frameset, but that's not what I want. Given that the user can close tabs for navigation manually, I bet that frameset can be modified to display closed by default. Can anyone help with this?
  
  Thank you
  
  Jesse

  Hi Rick,

  You are right! I have somehow missed this whole subfolder in the lean. Your wonderful resource more answers to my questions. One day I'll have to tell you how I rode 50 films Captivate SWF inside X 5 WebHelp and cramming the output of said in one CHM (skin CHM) pane. Kind of pain, but does exactly what I want. The table of contents closed was the last obstacle.

  Thanks for the 100th time!

  Jesse