A Telnet session can be passed 1 VI at the test bench

Test and Lab View, each of my tests open a telnet session, runs a test, close the session and is then repeated in the next step but run a different test.  So I get a pass/fail for each step.

Is it possible to open a telnet session in the format box test (using a VI created in lab mode) and move this telnet session to another VI in the main area of testbed.  (VI) test steps across would not open a session, saving time.

Thanks to all who responded.  To solve my problem, I created a VI that opened a telnet connection.  I did that Vi the Telnet on a control that I traced on a connector.  I placed this VI in my SETTINGS teststand.  In teststand, I made the telnet on a variable FileGlobal (called Telnet_Connection).  Then, in the region of the hand of teststand, I place a VI that performs a test on the telnet with on opening a connection.  I did the Telnet in a control and it mapped to a connector in the VI.  TestStand I made the telnet in the same variable as the telnet on created in the Setup program, Telnet_Connection.  Run the test and it worked.  My biggest problem was not knowing not how to create a variable or pass a variable in Teststand.  Thanks again for your help.

Tags: NI Software

Similar Questions

  • How can I pass on set to the next page with protection of session?

    Hey, guys:

    I have a problem of protection of session problem. In a report page I created a 'map' link column, so I can pass several parameters extracted from this line to the new page where I can see the map. I used javascript popup2 and it worked fine.
    javascript:popUp2('f?p=&APP_ID.:3006:&SESSION.::&DEBUG.::P3006_H_OFFENDER_NAME,P3006_H_OFFENDER_ID,P3006_H_ADDRESS_LATITUDE,P3006_H_ADDRESS_LONGITUDE,P3006_H_PHYSICAL_LATITUDE,P3006_H_PHYSICAL_LONGITUDE,P3006_H_ADDRESS,P3006_H_PHYSICAL_ADDRESS:#Offender Name#,#Offender ID#,#Address Latitude#,#Address Longitude#,#Physical Latitude#,#Physical Longitude#,#Address#,#Physical Address#','650','450');
    However, I am required to set all pages, elements with protection session now. After that, I had problem like:

    Try to save point P3006_H_OFFENDER_NAME in session state when the treatment of show, no internal protection.
    Contact your administrator for the application.

    So I changed it as redirect a page in the application and try to spend less settings and other parameters of query, but I had the similar problem:


    Try to save point P3006_H_OFFENDER_ID in session state when the treatment of show, no internal protection.
    Contact your administrator for the application.


    I notice that most of the solutions would turn the session protection as without restriction for these items, but I'm not allowed to do. Is it possible that I can pass parameters of a line in a report while the session protection is turned on?


    Thank you very much!

    Sam

    Sam,

    The best way I've found is just to create an element hidden with the PREPARE_URL and then refer to this element in your javascript. The following example calls a page in another application, but it should work the call from one page to another in a single application:

    -------------------------------

    EXAMPLE:

    Because we generally use checksums to level session on URLs, the URLS must be prepared with a checksum for the current session.

    Say that we have to deal with page 2. Page 2 has a hidden item (for example, P2_PREPARED_URL_WITH_CKSUM_1) to organize the preparation of the "Source of value or an expression, for example:

    APEX_UTIL. PREPARE_URL('f?p=9002:3:&session.::no::G_CALLING_APP_ID,G_CALLING_APP_NAME,G_CALLING_APP_PAGE_ID:&APP_ID.,&G_APP_NAME.,&APP_PAGE_ID.','SESSION');

    The hidden element is then used within the "URL target" button to open the corresponding page in the other application:

    JavaScript:popUp2('&P2_PREPARED_URL_WITH_CKSUM_1.',1200,1000)

    -------------------------

    Note in the example above, I've hard-coded the app id 9002. You want to probably use & APP_ID. bind variables syntax.

    See the long thread: https://forums.oracle.com/forums/thread.jspa?messageID=10394152. He points out a way (for now) even to call a page in an application in a different workspace, but this ability that is apparently a bug and should be fixed.

    Christian Neumueller has been a great help.

    Chris

  • Can not pass other newspapers in the form of windows 8

    I have recently installed Windows 8.  All of a sudden when my computer starts it shows my logo of microsoft account and account e-mail address and request my password - ok - I put my password and it says that it is not correct.  I know it's but I even went through the steps to try to reset the password, but when I go to the Microsoft Account page, it tells me that there is no trace of my account.  I tried to create a new account using the same email address, it wouldn't let me, insisting on a hotmail or live account.  I create a new account with a different email but nothing address is when I get to the login screen, it is always showing the e-mail that says that windows is not an account and ask, I guess, my old password it will not accept.  Help!

    Attempts to signing with windows live account gives incorrect password, even though I'm positive, it is true, I scoured the guests to have changed it, it always says this is a mistake - but I can sign in it elsewhere fine.

    I called Microsoft, a rather reluctant and rude woman who said I will receive a call back in the day, which was 5 hours ago.
  • Hello. How can I pass a variable as the name of file in writeStringToFile.

    When I try to pass a variable as writeStringToFile it is ignored.

    For example:

    getVariables () .set ("ts", "{{@today (YYYYMMddHHmmss)}}", Variables.Scope.GLOBAL);

    Path String = "C:\\OracleATS\\OFT\\Databank\\";

    String file = "test .csv {{ts}}";

    String completedOrders = path + file;

    Info (completedOrders);

    utilities.getFileService (.writeStringToFile) (file, "CreatedDate, customer, iteration, OrderNumber" + "\n");

    In the previous case.

    a. the console returns the correct file name: C:\OracleATS\OFT\Databank\test20151005133343.csv

    b. the file system will not be: test .csv {{ts}}

    Thank you for taking the time to consider the issue. I found another way to achieve this. It must be as follows:

    Import:

    import java.util.Date;

    import impossible;

    Format of date as follows:

    Path String = "C:\\OracleATS\\OFT\\Databank\\";

    String file = new SimpleDateFormat("'scriptOut_'YYYYMMddHHmmss'.csv'").format (new Date());

    String completedOrders = path + file;

    Info (completedOrders);

    utilities.getFileService () .writeStringToFile (completedOrders, 'CreatedDate, customer, iteration, OrderNumber "+" \n");

  • How can I pass a condition of the table in the sql statement?

    For example, in the table in the COND Varchar2 column (200) there is the value ' VAR > 10'.

    | COND |

    |' VAR > 10' |

    where VAR is the name of the table column. I would like to make statement CASE WHEN VAR > 10 AND 0... I tried with as subquery

    WHEN BOX (SELECT COND FROM TABLE WHERE...) THEN 0, but it does not work.

    Hello

    You can do this by using dynamic SQL.

    that is to say:

    declare
      v_stm      varchar2(4000);
      v_cond      varchar2(100);
      v_result    integer;
    begin
      select cond
        into v_cond
        from yourtable
      where a=1;
    
      v_stm := 'select case when '||v_cond||' then 0 ...';
    
      -- dynamic sql
      execute immediate v_stm
        into v_result;
    
    end;
    /
    

    Remember that, in general, dynamic SQL has a performance degradation that SQL static and should be avoided when possible.

    Storage condition or the SQL statements in the tables is not a good practice.

    Kind regards.

    Alberto

  • How to pass Array Collection to the test?

    Hello

    I'm going through the c# collection (ArrayList) of application object in TS. I output value assigned in TS container, but when executing end of sequence, then an error occurred: "value specified to not the expected type".

    What should I do to get full access to my ArrayList? What kind of type of variables should I assigned ArrayList?

    Thanks for the help anyway.

    Piotr

    Hello

    It should work if you use ObjectReference rather a container

    Discover this simple example

    Concerning

    Jürgen

  • How to pass a variable to the nearby operator

    Hello! does anyone know how can I pass a variable to the proximity operator?

    with this query variable1 and variable2 are read as words, not as variables.

    SELECT *.
    FROM t1
    WHERE CONTAINS
    (essay, "near ((variable1, variable2), 1)'") > 0;

    Thank you!

    Best regards
    Sara

    You may not use a link within a string variable. This is not a restriction of Oracle text, it's just the way bind variable work in Oracle.

    You can build a string literals and variables, although, like this:

    SELECT *
    FROM t1
    WHERE CONTAINS
    (test, 'near(('||:variable1||', '||:variable2||'), 1)') > 0; 
    
  • From the telnet session between calls of LabVIEW, TestStand

    TestStand, I'll call telnet.llb VI.

    In a step TestStand am opening a telnet session to IP address and the collection of the telnet (U32) connection. In the next step of TestStand, I pass the telnet connection to a telnet writing VI, but this error occurs.

    "Dequeue item to acquire Semaphore.vi:1-> Write.vi:1-> Telnet Write.vi.ProxyCaller Telnet"

    The telnet open, write, read and close the excellent work if I get the number of telnet in the same VI session. But I need to keep the session open between TestStand calls because a huge VI is not possible.

    Thank you

    Josh

    Verify that your adapter for LabVIEW has reserved the execution. If it is already, I don't know, you may need to create a parallel thread that keeps the session active.

    CC

  • Telnet session

    How can I start a telnet application session? in that place so that I can find the doc or examples can use blackberry of Pentecost for the telnet Protocol?

    As far as I KNOW, there is not any API pre-built for telnet on the BB platform.

    You can write yourself or find a Java code open source that looks like it may be portable.

  • Telnet Session 506th PIX

    I have a problem with my 506th Pix: I can not connect by telnet session. Y at - it an option to reactivate PDM?

    Thks

    Yes, there is a way to access Telnet via - PDM

    Cofniguration-> system-> Administration properties-> Telnet

    Here you can add the host IPs you can telnet and specify the interface where these customers.

    Note: You cannot telnet to the outside interface security PIX firewall / low level.

    Kind regards

    Maryse.

  • How can I pass a value to a variable binding in a report query?

    I did a query of report to print a PDF report, with a dinamyc source query that has a connection variable, like this:

    SELECT EMPNO, EMPNAME, EMPDEPT

    FROM EMP

    WHERE EMPNO =: PARAMETER;

    I want to call the report print directly from a page, by using the url print showed by apex:

    f? p = & APP_ID.:0 : & SESSION. : PRINT_REPORT = MYREPORT

    How can I pass the value of the variable binding: PARAMETER using this URL?

    I don't think you can use the url parameter passes in a report query.

    the binding variable: PARAMETER must be a page element or an element of the application.

    use the "include session information and application" in the defination of report query to bind the value when the report is run

  • Can I pass parameters to an apex at a second apex application application?

    I have two applications apex in the same workspace. The first application has a link that sends to the first page of the second request. This part works fine. I want to do is to pass two parameters to the second request that it can use. Is it possible and how would approach I did this?

    Apex 3.0

    Thank you
    Terry C

    Just put the target items and values in the URL:

    f?p=OTHERAPP:123:&SESSION.:MYREQUEST:&DEBUG.:123:P123_ITEM1,F200_APP_ITEM:HELLO,WORLD

  • How can I delete a tab in the Session Restore?

    After that Firefox crashes, I sometimes get a message suggesting to delete one or more tabs to restore my session. I tried to highlight > delete, which did not work. I tried to highlight > and 'restore' in the upper part of the column to remove the check mark, but this function is still frozen (so I wonder if it never works for anybody). My only option is to start a new session.

    You can double-click an entry on the subject: sessionrestore page to toggle the input power and to prevent the opening of this tab.

  • Asking how I can pass array generated using the registry to offset at the end of the iteration of a loop in the beginning of a new iteration?

    Hi guys,.

    I currently have a problem in my Final project of the year at the Nanyang Technological University, Singapore.

    Basically, currently I develop a Lab View 2009 comb filter (attachment: filter2.vi correct comb)

    Entry into the comb filter is delivered in lots of 1000 samples.

    However, I'm supposed to process data on a continuous basis.

    Basically, my comb filter takes the difference between the current sample (sample t number) and the number of the sample (t-40) and divides the result by the square root of 2.

    The problem is that for the second lot from, I have to take the difference between each sample 40 first the current batch for each sample 40 last of the previous batch. My program currently cannot deal with this problem since it can not pass the 40 sample past the current batch in the batch so that we can perform this task. I tested it using test comb filter.vi (attached).

    Could anyone help with a suggestion?

    I would really appreciate since the approach of the project deadline.

    Thanks before.

    Kind regards

    Agus Frédéric

    School of mechanical and aerospace engineering

    Nanyang Technological University

    Send samples of past 40 current a shift register. When you read then it's going to be the last 40 precedents.

    Then subtract previous last 40 40 first current and divide. Fact.

    Basically, as indicated in attached vi.

    /Y

  • can I add a serial number to a single pass selected to the test

    Hi, I have a number of tips that I test which are marginal passes or marginal failures and wish I could re - test failures by running the test steps pass / single selected and adding the result to the map existing under the same serial number result of UUT (unfortunately the test together take 20 minutes so it would be much faster I could re - test just the test that failed).

    I know that you can add results under the same serial number, but don't know if you can add a single test to this same result.

    At least, it would be good that I was able to store the individual result by using the serial number of the object to measure

    Thank you

    Chris

    Thanks, that's great.

Maybe you are looking for

  • How can I schedule E-mail reminders ala Boomerang?

    I like the Boomerang for Gmail and can use on other browsers, which works like this app on Firefox?

  • message headers

    After you configure my IMAP account, now when I receive messages the message full details are given in the gray header section, including: Return-PathReceived (IP address, etc.)Message-IDOrganizationUser AgentMIME-VersionReferencesIn-Reply-ToX sent-M

  • Digital TV suddenly does not work. Problem updating firmware?

    Hi everyone, I hope someone can help! A few months ago, I bought my Bravia Sony 4 K KD-43X8309C at the beginning of August and it worked great. Everything has been fine. I'm going to turn it on this morning (Sept. 30) and have no digital TV, the pict

  • Connection Wi - Fi disconnects frequently

    original title: I have a problem with my connection wireless internet After going through all the configuration wireless, I get a few minutes then I'm disconnected again. This has happened for weeks.

  • the Windows Task Manager displays only the CPU ussage

    Can't do the Task Manager to display any other tabs or do anything except show me CPU ussage.  I computer re started.  reopened and closed several times.  rather frustrating is that I do not see the programs running behind it. There is no option for