A virtual machine running from the command line

Similar Questions

• Analyzer of sequence running from the command line in TestStand 2010

  Hello

  I would like to be able to run and control the stand-alone command line sequence Analyzer.  I can do that in 2014 TS (and it seems that I could patch versions as soon as 2012 TS to give them this ability), as described here: http://digital.ni.com/public.nsf/allkb/B927893F26BFB64A86257ECE006E442D

  However, I work with a large existing codebase in 2010 TS (with no intention to migrate to a newer version, in the foreseeable future).  Is it possible to get the same functionality from command line in the 2010 version of the parser?

  I know that I can open the command line parser, but are the commands, I am interested in: analyze, report, / save, /clearMessagesOnSave, / minimize, / help, / / leave.

  Thank you!

  Thanks Ryan, Jigg,

  Yes, I can run the parser (and opened a project), but basically, I can't run anything.

  I realized what I do by writing a TestStand sequence that calls the parser to sequence through its API (attached).  I can then run TestStand (and call this sequence) from the command line.

• Error running webworks create from the command line in Beta 2 of Webworks

  Hello

  I am creating a project of cordova webworks from the command line. I run the following command:

  WebWorks create f:\devroot\NEXT_GEN\MobileApp\WebWorks2\MyApp com.joe.myApp MyApp

  However, it fails with the following error message:

  {[Error: check incorrect header] errno:-3, code: "Z_DATA_ERROR"}

  It seems to me that its attempts to download a tar.gzip drop of github (url below), but this file does not exist:

  URL: https://git-wip-us.apache.org/repos/asf?p=cordova-app-hello-world.git;a=snapshot;h=v2.0.0.54;sf=tgz

  So I'm not sure that my project directory is set up correctly. What is contained in this folder which its trying to find in the remote repository and is it relevant to my application?

  I can see my project directory in the space provided. It contains the following folders:

  ".cordova', 'merge', 'platforms', 'plugins' and 'www '.

  ".cordova" contains a subfolder 'hooks' which, in turn, contains about 24 cases being with 'after' or 'before' (e.g.after_build, before_build), it seems to be empty. It also contains a config.json that contains the attributes id and name of the project. Do any other necessary information in config.json?

  All other folders are empty.

  Is any other thing missing? should there be a config.xml file created for me in the directory "www" for example?

  Just add a config.xml file myself? Y at - it information about the correct structure for the config.xml file in webworks 2.0?

  Thank you

  Joe

  Hey Joe,

  So, just to confirm, HOST = "C:\". "and USERPROFILE ="C:\Users\?

  This is useful. Normally Windows machines do not have a HOME environment variable.

  We must ensure that these files copied to %USERPROFILE%\.cordova\lib\www\cordova\v2.0.0.54

  Please try this patch to webworks-cli/lib/utils/utils.js:

      findHomePath : function () {
          return process.env[(process.platform === 'win32') ? 'USERPROFILE' : 'HOME'];
      },
  

• Add text from the command line to the output so that I can know how a command has been run when it generated the output

  This is a question and a suggestion...

  I would like to be able to precede or add if it works, the command line in the output file that creates the order.

  Example:

  I run dcdiag with switches, etc. and create an output file of results that gets saved or sent to a person or just put it in a folder. Of course, it could be that someone else ran the command and then sent the file. Anyway the problem is the same - what was the exact command line that has been executed to achieve these results?

  Question:

  Is there a known way to do from the command line that I can apply to any command?

  Suggestion:

  If this isn't the case, then I would suggest MS to include this function in all the BACK and PowerShell commands able to produce text output.

  If all goes well they monitor this forum and find it's a great idea and send me a check (pinky in my cheek) a meeellion of dollars. Then I and I alone will rule the world.

  Here you go:

  d:\>format i: / FS: NTFS > format.txt
  d:\>echo i format: / FS: NTFS > format.txt

• Run the form 10g from the command line

  Hello
  
  I want to execute form 10g from the command line. Can someone help me?

  First the srwAPIins.sql, then the srwAPIgrant.sql script.

  François

• How to reset Firefox from the command line (without a mouse) on Linux?

  I use Firefox for automated desktop screenshots xvfb virtual. There is no mouse. So I need to reset Firefox from the command line. Uninstall a re - install led again to the window "reset".
  I use Ubuntu Server Edition 13.04.

  Otherwise, without a keyboard and a mouse, you can just reinstall and delete. / mozilla folder.

• How to change Microsoft Security Essentials at the request of the parameters of scanning from the command line or in a script.

  Is it possible to change the parameters of the scheduled scan of the Microsoft Security Essentials from the command line or in a script?

  I know that I can use the command to schedule the MpCmdRun.exe tool command line to run, but that do not change or remove the existing scheduled scan that appears in the software. Run regedit to merge into the corresponding registry keys does not work because the keys are "locked", probably by the running of MSSE program.

  Suggest you post it in one of the forums dedicated to MSE - Microsoft Security Essentials: scanning, detection and removal of threats MowGreen Update Services - consumer safety

• Install the cartridge from the command line

  All,

  The problem, I am trying to solve right now is automated synchronization on all my servers cartridges.

  That said, is there a doc to install cartridges on a FMS from the command line? I don't see to be able to find anything.

  Thank you!

  It's the good FGLCMD for the installation of the cartridges. In case you want to install several cartridge I use this in addition to a find on unix systems command.

  Something like this code snippet (which I use in a recipe for checf

  It uses a MD5 checksum and verify changes in my repertoire of cartridge. If there are changes, it will run installs on all cartridges. You can change this option and check the individual by file md5 sums.

  script "install_additionalCartridges" do  interpreter "bash"  environment ("CarDir" => node.fglCache+"/"+node.fglVersion+"/cartridges")  user "foglight"  cwd "/foglight"  code <<-EOH
  
            md5sum $CarDir/*.car >/tmp/cc.md5
  
            diff /tmp/cc.md5 /foglight/state/cartridgesChef.md5 >/dev/null          if [ $? -ne 0 ]          then                    find $CarDir -name "*.car" -exec  /foglight/product/*/bin/fglcmd.sh -cmd cartridge:install -f "{}" ";"          fi
  
            md5sum $CarDir/*.car >/foglight/state/cartridgesChef.md5
  
    EOHend
  

  Make sure you add - usr and pwd - if you are not using the default settings and svr - if you do not want to do it remotely.

  Stefan

• How to upgrade an ESXi host from the command line

  Sorry for bumping an old thread. I'm new to ESXi. I'm under ESXi 5.5 build 1331820 and I am at a loss how to apply patches.

  Preferably, I would like to apply all the relevant patches through console (SSH). Can someone give me pointers how to do this? Thank you

  Moderator note (a.p.): branched to a new discussion of software patch to version 1331820?

  Welcome to the community,

  on how to patch a ESXi host from the command line, please see for example http://kb.vmware.com/kb/2008939

  Basically download you the latest hotfix package and install it using the command esxcli . That said, please make sure that your hardware is supported by the patch that you want to apply (see http://www.vmware.com/go/hcl). You can also do before installing the patch, is to do a "dry - run" to know what . VIBS are removed and which are installed by the patch. To do this add -dry - run to the esxcli command line.

  In the case where something goes wrong, you can revert to the previous state by pressing SHIFT-R , while the ESXi hosts begins the start-up.

  André

• Uninstall creative cloud from the command line

  We have a license for Adobe Creative Cloud 2015.

  I packed Adobe Creative Cloud 2015 Muse for Windows.

  We use Microsoft SCCM to deploy applications packaged in our 8000 machines to Windows 7.

  Using SCCM MS I can install the Muse of 2015 CC packaged from the command line.

  However, how to uninstall an application Adobe Creative Cloud 2015 from the command line?

  Move the discussion to the deployment to the Cloud, business, & CS creative team

• Open a file from the command line

  Hello

  I try to open a pdf file to a specific page from the command line on Windows 10.  I have referenced a few online sources (for example, the stack overflow), but could not find my mistake.  I enter:

  PS to C:\Program Files (x 86) \Adobe\Reader 10.0\Reader >.\AcroRd32.exe 'page = 50' \a "c:\test.pdf".

  When I do, the Player opens with an error message "there was an error opening this document. This file is not found", but clicking on the box OK dialog then opens the file (test.pdf is without a doubt), but the page = 50 command is ignored.

  Can anyone see my mistake?

  Thank you

  Dave

  Memory, /A is not \A.

• Cannot add to the inventory if virtual machine running on the other guests - iSCSI and VMFS5

  5.5 ESXi hosts free standalone version

  iSCSI mounts with multiple paths - relatively new unit with more modern hardware

  CHAP not used

  I'm running a few hosts in order to climb the same iSCSI data stores. The iSCSI LUN is visible and editable by all hosts. If Host1 is to map the iSCSI LUN (VMFS5) and a VM is powered, Host2 can add that VM to the inventory. It's possible with NFS iSCSI for a reason any. This is for a specific reason? Only when I turned off the virtual computer can I add it to both hosts. Other that just lock files are placed in the directory, I missed something related to the lock?

  From now on, adding new esxi hosts does not allow me to add existing virtual machine, less than the voltage first. Once again, NFS does, iSCSI, this isn't. Any ideas?

  It is not specific to ISCSI but rather to the use of VMFS. NFS has no awareness VM VMFS is and why it is not possible to do that with iSCSI / VMFS. There is a lock on the disk for each virtual machine of (race), and that's why the second host is not able to add this host to its inventory. With vSphere HA, this lock is released when a failover should occur.

• How can I "go offline" from the command line?

  I have programs that need outlook and internet explore on purpose to be offline in order to make them work properly. Currently, I click on file > work offline before starting my programs. I was wondering if it was possible to do the same thing via the command line.

  John

  Search a bit, I found this article: http://support.microsoft.com/kb/195730

  What you can try, is go to

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings

  in regedit and backup the registry key (read the regedit help file to understand how to use it, if you have not before).  Before you run all programs, you can try to merge this key and see if then when you start IE or OE, they start in offline mode.

  The name of the value to the "GlobalUserOffline" and the value of 0 means online and 1 means offline.

  See if it works.  If not, you may need to operate this HKEY_USERS that describes the article and then you need to find the appropriate SID, but then you can do as I suggest above for this key and it should work.

  Steve

• create the user from the command line

  I use Windows 7, I don't have a password reset disk and don't remember the password. How to create a user account from the comand prompt I can change the passwords?

  This has not answered my question. I could not connect. I found the answer and was able to activiate the account administrator hidden and solved the problem in this way.

  Thank you

  I'm intrigued by your answer, and here's why:

  • The subject of your message is 'create the command line user '. The answer I gave you will certainly do so.
  • If you had stated that you were unable to connect while I gave you a method to solve this problem.
  • Find your own solution, but you chose to keep it to yourself, depriving other people who might read this thread for your answer.

  If this happens again, then I recommend using a topic as "you forgot my password, can not connect" as this could summarize your situation in a sentence. Create an account from a command prompt has no relevance in your case.

• Is there a way to launch Windows 8 speech recognition from the command line?

  Is there a way to start (and stop) Windows 8 speech recognition from a command line prompt? I found a post giving the command to start speech recognition in Windows 7 as "c:\windows\speech\common\sapisvr.exe - SpeechUX". Although it seems to start the process of sapisvr.exe, MISTLETOE (the microphone with closing, minimize and text box) does not appear.

  Offered the same post "taskkill /im sapisvr.exe /f" to stop the service, but it throw an error of permissions in Windows 8. In any case, I'm more desperate to a corect command-line START the voice recognition system.

  Any help would be appreciated

  Yes, there is a way!
  Try to use the link in the ease of access.

  Launch this way C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessibility\Speech Recognition.lnk and everything will work!