A1-810 and cellular Radio

Similar Questions

• Is it normal that my iPhone 6 sec to drain the battery overnight so that wifi and cellular data are turned off?

  My 6s iPhone drains the battery overnight

  WiFi and cellular data off

  Not normal.

• Selection of group and the radio text box

  I have a form with a question like: "How did you who are we?" and a radio with some choice group. One of the radio group choice is "other - please describe! When selected, a text box changes to 'read only' and the user can write something. I'm not able to update a record with the user's selection in a field in a table (I can save either text or radio group selection area). Any help? Thank you!

  You should check the value of the selected option button. If it's not ' I have this answer: ", assign the value to $_POST ['Proposal_text'].

  If ((isset($_POST["MM_update"])) & ($_POST ["MM_update"] == "form1")) {}

  If ($_POST ['proposal']! = ' I have this answer: "") {}

  $_POST ['Proposal_text'] = $_POST ['proposal'];

  }

  
  

  $updateSQL = sprintf ("UPDATE sarcini SET solutie_6 = %s, introd_6 = %s WHERE id_question = %s",

  GetSQLValueString ($_POST ['Proposal_text'], "text").

  GetSQLValueString ($_POST ["'Full_name"], "text").

  GetSQLValueString ($_POST ['id_question'], "int"));

• When you use firefox, music and talk radio lights permanentely. I can't get rid of the radio.

  the radio lights up constantly through the speakers, and I can't stop it. I need the sound of the radio to shut down, while I use the computer online.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• iTunes error 1728 and iTunes Radio problem

  I was running an AppleScript script which asked iTunes to get the current title of the song and the artist, then go to the next song. Creating a list of the iTunes songs play me. I'm running on a MacBook Air (early 2014) with iTunes 12.4.0.199 and 2.5 AppleScript in the AppleScript Editor 2.8.1 running.

  I was running this script on the iTunes iTunes Top Hits 80 s 100 Radio station. Then my script returned the error 1728. I can assume only this is a lockout to click then a certain number of times that he became unhappy.

  I am now unable to play this station. It just does not do anything when I click play on the station. Other stations of working. My main concern is the station only plays do not, the error is additional info. I was able to play the station from my phone for a while (10 min). Now on my phone, it says "cannot start the Station: there was a problem starting...". ».

  Have you tried to restart the program. No luck.

  Help appreciated.

  Problem seems to be resolved. The next day after a reboot, everything seems to work.

• Revolve 810 and SCCM 2012

  I'm trying to deploy an operating system via SCCM 2012 a 810 turn and I'm having no luck with the driver for the CARD. I loaded the driver downloaded in SCCM and it is important without error but don't deploy. I put the driver on a usb key and it will load fine.

  Look in the file INF of the PCI VEN number is not there for the hardware in the Device Manager, is the right driver?

  Any suggestions on getting this driver to work with SCCM?

  This driver from Intel has solved the problem for me:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3299 & DwnldID = 18713 & Keyword = 82579LM + Driver & lang = eng

• Cluster (buttons and the radio channel controls) - select the right file

  I have a list of text files and I need to select and open an of based on radio button selection.  How to sync the radio button with control of the chain so that I can get the name of the control of the chain and open the right file name?

  The attached vi does not work as I would like.

  Edit: Or is there a better way?

  Depends on the source of the list of files.  If you embed it in LabVIEW via a table or another method, then obviously a recompilation must be made.

  If the list of files will come from a specific directory, then simply read the list of the files from there when starting of the VI (see example).

  Or you could store the list in the text file and read the file at the start of the VI.  You can edit the text at any time without recompilation.

• 8530w Win7 Home Premium fresh install - Wifi and bluetooth radio off just not online

  Hi all

  I encountered a strange problem. I did a fresh install of Windows 7 Home Premium 32 bit edition. I installed all the essential drivers; setting network, wifi, quick launch button drivers HP and others. Wired network works fine. However, the wifi button is orange and does not work on contact. All other keys work well, so I guess we can exclude. The driver is loaded OK and the hardware is connected according to the Intel Pro Set diagnostic tools. However, he also pointed out that the radio switch is thrown off, so the orange light right?

  The radio is off, bluetooth driver moved not because of 'not present material' and I can't enable it.

  I've seen other people with the same problem, but a majority of those who appear to have been related to the HP power management. And as this is a clean install, I don't think that power management is the problem. Just to be safe, I disabled the power management capability in the adapter properties.

  So, is there another way to activate the radio via the software without relying on the button of the Panel wifi? Are there other ways to diagnose the problem?

  Thanks for your help!

  Best regards

  / Thomas

  Have you installed extensions Intel Proset for Windows 7?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D4%257CswItem%253Dob_83281_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Have you installed the HP Wireless Assistant?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_84194_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can activate wifi via network connections

  

• Plyer Media does not support such as 3GP, FLV and Indian Radio.

  Why Windows Media player does not support such as 3gp, flv video and Radio T.V Indian.

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.

  Or you can download VLC player for a trial, it supports all video files 3GP and FLV incudling, I think it's much better than windows media player.

• Iconia A1-810 and battery

  My experience may be useful if anyone thinks they have a problem with the battery life.

  My Tablet battery suddenly began to sell out very quickly and I thought that it was due to a software update.   I did a factory restore, but still no solution.   So I pulled out my new micro sd card that I bought off Ebay and the problem disappeared.

  Tablet is now working like new with a very good battery life.

  Problem was caused by the cheap sd card.   Come back my money from the Ebay seller, but should probably buy a well-known brand.   Very happy with the A1-810.

  

  Interesting situation and you set up a point very relavent, there are dozens of dodgy SD cards out there, recommend San Disk or Kingston and buy from a reliable source, in this way, if you get a suspicious, you will get a refund or replacement.

  Peripheral checkyour of external storage:

  http://www.Softpedia.com/get/system/system-miscellaneous/H2testw.shtml

• Sansa Clip and Slacker Radio?

  Does anyone know if the Sansa Clip will work with Slacker Radio?

  Any info is appreciated!

  As Slacker internet radio, and the Clip (or indeed any Sansa player) is not, I don't see how.

• Simple form: just 1 text field and the radio button 2...

  I have a question about the Muse Widgets when it forms.  I have a very simple interface, I want to try to apply an additional tax of an amount of entry; I want to give the user the ability to select Add fresh or not.

  The only widget I found on current Muse was a Simple Contact form emails. I've stripped down to 1 input text, group 1 radio. I exported html code, added in the onclick event in the HTML for the radio buttons perform the calculation of the additional tax.  On the action of the form = "xxx", muse creates a few php files for validation and finally sending the form as an email, I have a test in the form e-mail address.  I can stub out that php and put in my own actions to waive the sending of the email.  I have 2 questions: ONE QUESTION) on the level of code there is a control of the syntax form fields (corresponds to the entered text input, is a selected radio button, etc.). SimpleContact form comes with 3 < p > < / p > due to the action of the form = "xxx" statement. The 3 lines correspond to the errors, which is a generic "server has encountered a problem." (something like that).  Does anyone know what code is to identify the error and how it is returned to the call statement? MuseUtils.js?  It is not in the action = "xxx" php referenced file.  It maybe too much, I'm interlacing syntax, semantic validation on a form after the muse html export.  Second QUESTION) is before all this... it all simple forms of 3rd party, I can use (Group 1 radio 1 text, drop-down list), which I can integrate Muse?  Looked at Muse-themes.  Don't have a complete package of e-commerce, yet.  (This is for a non-profit and trying to reduce recurrent costs).  Sorry, this is so wordy, appreciated by any direction.

  Answering the second question, you can check out these alternatives:

  http://musewidgets.com/search?q=form

  Thank you

  Sanjit

• A loop via the instance manager and check radio button selected

  I need the loop through my case and toggle visible/hidden if a particular option in each instance button is selected.

  My code doesn't work right now, but I feel that I am on the right track (less the else statement, that will require alternate power).

  Can anyone help? Thanks in advance!

  var rowCount = BugGroup_f.instanceManager.count;

  for (i = 0; i < rowCount; i ++) {}

  
  var str = xfa.resolveNode("BugGroup_f.detail3.bugInfo.BugItem.status.RadioButtonList["_+_i_+_"]").rawValue;

  If (str.indexOf ("Fixed") >-1) {}
  xfa.resolveNode("BugGroup_f["+rowCount+"]").presence = "hidden".

  }
  }

  Well Yes, if the exact logic that are hidden or unhidded can be tweeked as you wish.

  That code correct will hide (or leave hidden) any line that has the radio button is set to hide. Allowing you to call with a reset (1) value that will display all the lines reguardless.

  If you want different logic than that, it's just a matter of what you put inside the loop for and can be as complex as you want.

  EDIT:

  To add a script object, right-click on the top shape in the hierarchy window and choose "add script object.

  It will be a subject without name down below (under the "variables") and you can put any code in there that you like, in the form of "function".

  then to run the code, you reference the function by name of certain form events, and you're off to the races, so to speak.

• AJAX linking and IE radio buttons

  Hello
  
  I have a very simple form with a button simple radio (10 buttons) control. Clicking on one of them is supposed to pass a URL variable to a cfdiv at the bottom of the page (outside), which is simply this:
  
  {< cfdiv bind="url:#application.codebase#experts/edit-question.cfm?questionVal={questionVal}" > "
  
  Questionval is just a number: 1-10.
  
  It works in Firefox, but in IE, there is a "shift click" - the value of the form is always a click behind you, and he ignores the first click.
  
  In other words, if the form begins with nothing checked, nothing happens when you click on one of the numbers. When you click on a different number, it refreshes the cfdiv with the value of the previous number - so if the loading of the page and I click on 10, nothing happens; If I then click 1, it loads the cfdiv to a value of 10.
  
  If I use @mousedown I double click on a button and that it loads successfully, but this is obviously not an ideal solution. If someone has encountered this? Is there a way to manually edit the AJAX Library in Coldfusion?
  
  Thank you!

  {Answer my own question: should use the @click event to make it work properly in Internet Explorer (questionval={questionVal@click)}.

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/