A10-70 Wifi

Similar Questions

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• CPU upgrade for Satellite Pro A10?

  Toshy A10 my wife has a Celeron 2.2 CPU. Can I get a faster processor?

  Belarc gives details of 'primary circuit' as:

  Tip: TOSHIBA Portable PC Version A0
  Serial number: $$ S238Q23F
  The bus clock: 100 MHz
  BIOS: TOSHIBA Version 1.30 02/09/2003

  768 MB of RAM is installed.

  Thank you.

  Steve

  Hello Steve

  If you Google a bit you will find some A10 units come with Intel Celeron 2.5 GHz processor. Maybe you can use it to upgrade.
  Speed of the bus on this unit is 400 MHz.

• What for Satellite A10-PSA10A-3V1KK miniPCI WiFi card?

  Hello

  I have an old Toshiba Satellite A10-PSA10A-3V1KK and I would like to add a WiFi card in the miniPCI slot.

  I understand the initial documentation that the optional cards at that time were PA3212U-4MPC and PA3273U-2MPC (my favorite, as being compatible WPA). However, these references seem quite hard to find now...

  Are there other, more recent references, 100% compatible with my Satellite A10, that I might consider?

  Thanks for your help,

  * CPP *.

  As much as I know there is no references to the old models of laptops, and I don't think that old notebooks are tested with new material. So everything you can find about this is info you already have.

  If you want to use the faster wireless network card using new WLAN standards you use PCMCIA WLAN cards.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Satellite A10 S213 - what the WiFi card is compatible?

  An old man gave me his toshiba Satellite A10 S213, but there is no card wifi inside:
  Where can I find a decent one (makes reference to).

  Hello

  Found this page of specification of the specifications:

  [Satellite A10 S213 | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 65865]

  It seems that Wlan is evolving and you can use a Wlan miniPCI card that supports the 802. 11b standard.

• Acer Iconia A3 - A10 is not connecting to wifi from kitkat update

  So, I got my acer iconia for about 5 months and have never had a problem with wifi connectivity until the update of kitkat. When I try to connect to the internet, it says the usual: connection, authentication, but it gets stuck on IP address get and then starts a return loop to connect. Has anyone else had a similar problem? Help, please!

  Hello..

• How to add the internal card card wifi pci Satellite Pro A10

  Hello

  I want to add a mini PCI wireless network.
  How to install this. This card is in the slot next to the battery on the bottom of the laptop. (slot number: 4).

  Concerning

  Hello

  Each series of notebook Toshiba supports different hardware specifications.
  This means that some units can be improved with internal miniPCI WLan and some computers laptops don't support this feature.

  I put t know what series of notebook you that an internal card may be placed either in the slot located at the bottom of the device or hidden under the keyboard.

  See you soon

• Satellite Pro A10 HDD

  I have the Satellite Pro A10 C2.2GHz/XP Home/256 MB/20 GB/14TFT/DVD/WiFi. One day, the computer just froze and then resets and would not start again, and I kept getting the message:

  «PXE - E61: MEDIA TEST FAILURE, CHECK CABLE.» PXE - M0F: EXIT INTEL BOOT AGENT. "INSERT SYSTEM DISK IN.

  or

  'A DISK READ ERROR OCCURRED '.

  I tried some hard disk controllers, but they are unable to get anywhere, because they cannot access the drive. Anyone know of any solution to this, or if not, where would be the best place for replacement because my warranty has run out.

  Any help appreciated,

  Thank you
  Tom

  Hi John,.

  Unfortunately, it seems that if your HARD drive has crashed. The message of your BIOS is normally what you see if the PC cannot detect any bootable devices. Usually, it is a bootable HARD drive.

  Assuming you have the Toshiba Recovery CD you could try to restore your existing system to your HDD (it will automatically reformat the hard disk first), but you might find although it will simply fail restore due to the failure of the drive.

  Your next option is to replace the HARD drive. You can do it yourself very easily, or you may prefer to take the laptop to a Service Agent for them to do. Note that you still need to rebuild your system from the recovery CD according to your choice.

  Given that your device has a 20 GB HARD drive standard you could take this opportunity to install a larger capacity drive.

  HTH

• Re: Tecra A10-19 t on Windows 7 64bits successes?

  Hi all

  I intend to buy a Tecra A10 - 19 t and its docking station (PA3508E). I'll order it with 4 GB of RAM so I'll format it the first day to remove Vista32 to install seven (I don't like Vista) 64 (want all available RAM).
  Someone has a return facility 7_64 beta or RC (same RTM) on this laptop? No problem with drivers (video, BT, Wifi, audio,...)?

  Thanks in advance,

  BELOKAN

  As a general rule, Windows 7 can use the Vista drivers, drivers Win7 beta on the Toshiba site there we.

  So if you can find drivers Vista 64-bit for the A10, there should not be problem.

• Tecra A10 - "no data connection '.

  I have a Tecra A10 - 1HP under XP Pro SP3 with all latest drivers. I have the 3 g drivers, Wireless Manager and the power plant installed and it works well. After a few hours of non-use, the grey globe down my clock has a question mark orange appear with 'No data available Connection' appears in the Wireless Manager when it is open. Drivers, etc. are later. The only way to retrieve a connection is to restart. Reinstalling the drivers / Manager does not clear this error.

  I tried Vista and Win7 and still have the same question. After a few hours of inactivity... available data connection. My 3g provider is BT Mobile Business and creating connection works fine.

  Why he died after a few hours of inactivity? Any help is appreciated.

  Hello

  Have you tried disabling the power saving for the 3G and WiFi?
  If this is not the case, this!

  You can change the settings in Win 7 Power Management.

  You can try to disable the option in Device Manager-> Wlan card-> properties for energy savings

  Last tab called Power Management contains this setting.

  Good luck

• Satellite A10-wireless problem

  Hello! I have the Satellite A10 with integrated wireless Windows XP Professional. I was trying desperately to make wireless communication integrated works, but without success. Windows has found two "Base system device", and I suspect that one of them is the wireless. I tried to install different wireless drivers that are supplied with the CD for the laptop, but so far without success - Windows refuses to accept these drivers for unknown devices. No idea what I am doing wrong? I downloaded the latest drivers wireless for A10, but nothing has changed. One of my friends suggested that the BIOS must have a setting to toggle wireless, but I couldn't find this setting in the BIOS. Any help would be greatly appreciated!

  Hello
  Initially, you are sure that your computer has preinstalled absolute Wifi?

  To be sure about you could give me the complete Modelnumber or serial number.

  I am so lucky to find the installed equipment.

  THX & bye

• Satellite Pro A10 - Win 7 with WLan PA3171U-1MPC

  Hello

  I have a Satellite Pro A10 with a PA3171U-1MPC Wireless LAN Mini PCI Card, 160 GB HARD drive and 1 GB of RAM, I want to upgrade to Windows 7 for my son.

  He worked in XP before.
  States of Windows 7 Upgrade Advisor:
  "Before installing Windows 7, go to the device manufacturer's Web site to download the latest driver for this device.
  After I installed Windows 7, install the sound driver. »

  Does anyone know if there is a driver (Windows 7) or a WinXP driver will do the job?
  If Yes, where can I download a (my XP image has been corrupted, I'll do a new installation).

  Thank you very much
  Steve

  Hello

  Firstly by Satellite Pro A10 is not Win 7 supported and therefore, you will find not all Toshiba drivers for this model of laptop. The unit is just too old.

  I put t know if Win XP WLan driver compatible with Win 7. I think that it s is not compatible. Driver Vista may be compatible with Win 7, but not Win XP driver.

  In the worst case, you will need to use an external USB WLan dongle to get wifi on this laptop.

• TECRA A10 - 11 M - problem with TOSHIBA accessibility

  Hello to the forum.
  I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
  I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
  Here I have faced a problem with my buttons of accessibility. My function keys do not work!
  The message is: this system cannot be used "TOSHIBA accessibility.
  I uninstalled and installed again the feature, but nothing happened.
  Y at - it a program known that affect my system and prohibits any accessibility to work properly?
  Can anyone help with this?

  Thank you in advance,
  Vassilis

  _ @ dvass66_
  The FN keys need to installation of common Modules and Hotkey utilities for display devices.
  Common modules must be installed first!
  Also I recommend the update to the BIOS too

  _@korenisko_
  > I think that problem on this laptop is Wifi Atheros card
  I put t know why you think this, but I put agree t
  I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
  Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

• Tecra A10 - refurbished - cannot get it connected to my home network

  I just got this Tecra A10-104 refurbished Laptop... before I take this back I ask here in case where theres something I missed as I am unable to get it connected to my home network.

  I use a Belkin wireless router that has 2 main (LAN) directly connected PC and another PC connected wireless.
  It's my router: http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=9238&scid=0

  All PC connected and fine work.
  Now I'm setting up this laptop to connect.

  I uninstalled the Vista Business and ussed the product recovery disc that came with the Tecra XP Pro.

  Is my wireless card: Intel (r) Wireless WiFi Link 5100 (pilot Date: 27/04/2008 - the driver Version: 12.0.0.73)

  He sees the network, but no matter what I try just does not connect.

  What I've done so far (read before suggesting things I've already tried):

  Reconfigured routers WPS to the shared key system.

  Ensured that the wireless adapter's parameters defined at 20 / 40 Hz (automatic)

  Restarted the router, cable modem & laptop several times

  Laptop wireless button is turned on.

  FN + F8 to activate BLUETOOTH WIFI (ON) (OFF)

  Wireless network added to settings Auto Connect with the end SSID and password encryption method.

  Click on connect when network appear in the revamped network and Password Viewer dialog.

  Does not.

  I would add that the laptop has no problem connecting via its Gigabit LAN port.

  Something else I'm missing?

  Thanks in advance.

  EDIT: Double post deleted.

  UPDATE:

  The next thing I tried was to reinstall Vista Professional recovery disk to see if it has suffered from the same problem.

  Wireless has worked under Vista, and despite the updates I was offered, worked without having to update all the drivers.

  This got me thinking... so the question is probably DRIVER XP related.
  What I've done now is to back up all the updates driver told me to download TEMPRO (BIOS & Manager wireless updates included).

  I think part of the problem is that only TEMPRO works under Vista (not XP) so you are not informed of any updates may be required if you upgrade to XP directly after the purchase (which is what I did).