A1700n not allowing the installation of audio drivers for the audio device.
HP a1700n
Windows xp sp2
recently installed a new hard drive and reinstalled the operating system from scratch.
When attempting to install the driver for the audio device, named as "Audio device on high definition Bus" I'm an abupt with a blue screen stop referring to * RltekAUD.sys* * (hot flashes too fast to get the entire message.)
Before you install the new hard drive, the system worked well. I tried the fix suggested by HP, 4 different realtek drivers.
I tried to install in safe mode, which installs without error, but no sound, and regualr mode restarts, causes the blue screen with the error above.
Rotate the processor Dual core AMD Athlon 64 x 2 3800 +.
I disconnected an additional device and can't seem to get my sound.
Anyone else having a similar problem? Fix known?
It was an exhausting fix. However, a problem that seems prevalent with machines of OS that came with Vista, but got XP installed on them.
The problem is resolved: that is the solution and the method.
First, I tried to reinstall the operating system and installing the drivers in a different order. -WORK
I reinstalled the operating system and tried to install the driver in safe mode, partial correction, pilot would install, but would not start in standard mode - WORK NO
Downloaded and tried 5 Realtek driver different solutions all the way from rolling back or front - WORK NO
SOLUTION THAT WORKED-
Found this in another forum:
Log in to regedit, search for "bus auu", delete all entries
delete "" busMicrosoft UAA HD audio driver " since the Device Manager"
Restart in safe mode
install the version 2.02 driver realtek
Restart in safe mode
audio work
relocation of bus Microsoft UAA HD audio driver
SOLVED
Tags: HP Desktops
Similar Questions
-
My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator, I'm the only user on this computer. Help please.
Thank you, Nicholas Cooper.
Here you go:
- Right click on the installer.
- Click on "Run as Administrator".
-
Internet security Windows 7 will not allow the installation of Flash Player 17 update
Internet security Windows 7 does not allow the installation of the update of Flash Player 17. I tried the direct installation using the IE_AX update without success.
The procedures described in the last link enabled the update of Flash Player be downloaded and installed.
It is regrettable that Windows IE seen Adobe as being an unreliable Site and requires a temporary user disable the security settings for the update to proceed.
Thank you for your help.
-
Satellite L100-120: Wlan does not allow the transmission of large data packets
Satellite L100-120, Intel 3945ABG.
Router Wi - fi is 3COM OfficeConnect Wireless, same problem with Dlink DI-524.By default my wi - fi card does not allow the transmission of packets of data.
I use ping-f-l 1464 192.168.1.1 to check if it is possible to send a large package. All packages more then 600 large fail to be sent.
It is tragically wireless performance and I almost cannot use internet at all. I solved the problem partially by setting the MTU to map wi - fi at 548. Connection is now stable, although I can not yet send massive emails. Anyway, it is not a good situation to have such a low MTU value.
Everybody respected this problem?
I think you will find the solution in this announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15101I think the secret is the update of the BIOS!
-
Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.
I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:
The game could not create the Direct3d device. Please make sure your video drivers are installed properly.
I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?
Thanks again for the help.
I'm not familiar with Apple but I found this:
http://support.Apple.com/downloads/#NVIDIA
Except that it is what I have from NVIDIA:
http://www.nvidia.com/object/notebook_drivers.html
Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.
-
recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution
Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.
If you were not able to validate, follow these steps:
1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062
1B. double-click the executable file to run the tool.
2. after running the tool, click the Windows tab, and then click copy in the Clipboard.
NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I'm indicator error saying that my security would not allow the attachment to download in XP
I have eror flag saying that my security would not allow the attachment to download
How can I change my security settings to allow downloading but not to leave my computer at risk* original title - can'rt open attachments-*.Hello
Try the fix tool from the following link to return the security settings to default levels and verify.
Improve performance and security in Internet Explorer
http://support.Microsoft.com/mats/ie_performance_and_safety/ -
can not open attachments: my security settings do not allow the download
Why can't I open my attachments?
I can open emails, but when I click on the attachment I get a message that my security settings do not allow the download. I just want to be able to read. I've adjusted each security setting that I know. Help please!
Outlook Express?
Tools | Options | Security. Uncheck the box: "do not allow attachments...". »
-
After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning
Hello
If you use Norton, which could interfere with the restoration of the system.
Disable Norton while doing your system restore.
See you soon.
-
Internet does not work on Windows 7, no drivers for the Wifi and LAN
Original title: Windows 7
I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?
Well, as my readers usb and touch screen no longer work.
You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.
If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.
Reinstall Windows 8.
-
Whenever I try to download it says that there is a virus attached and will not allow the download to continue. It only gives me options other than come on the Microsoft site. Help! How can I fix this problem without having to lose all the information stored on my computer?
Original title: download questions
Whenever I try to download it says that there is a virus attached and will not allow the download to continue. It only gives me options other than come on the Microsoft site. Help! How can I fix this problem without having to lose all the information stored on my computer?
Hello
It would seem that you are infected with malware.
Read the answer in the link by The ball
Your PC is probably infected with the new variant of Sirefef AKA Zero access. The authors scheduled to turn several times a day to help him avoid detection by anti-malware programs.Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.Good luck...
-
Will not allow the transfer of files without authorization. How do I get permission?
2 laptops to home network. Windows 7. 1 x 64-bit, 1 x 32-bit.
I have set up accounts on both computers at home as an administrator.I just want to transfer files / photos between them.My account on both (admin) will not allow the transfer of files without authorization.How can I get permission? I have set up on the two passwords I tried to use, but not joy.I missed something obvious? I thought that I could just drag and drop!HELP please.Ownership of a file or a folder,
Right click on the file/folder, select properties and then click the Security tab.
Click Advanced, and then click the owner tab.
Click on edit and then do one of the following:
To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
To change the owner to a user or a group is listed in the change owner to box, click the new owner.
To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.
See also why I can't delete a file or folder?
How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message
What to know before applying permissions to a file or folder
-
Application of program compatibility does not start
I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service. What gives?If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.
Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.
-
The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8
Hello
I hope you can help.
I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.
ERROR: An error has occurred (code 0 x 80310060):
Group Policy settings do not allow the use of a PIN code start. Please choose a
other BitLocker startup option.I tried to change local policy settings...
- Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
- Open the key require additional start authentication
- Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN
.. .but always not the same error.
Help, please. He drives me crazy!
Hello
Thanks for choosing Microsoft Community to post your question!
According to your description, it seems that you have problems with activation PIN code on startup.
Refer to the suggestions from this link and check.
For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads
-
Do not allow the virtual machine to power on if the host memory usage over 75%?
Hi all
I'm looking for a way to do not allow the power of virtual machines on if the clutser average memory usage is greater than 75%, or if its corresponding host memory usage is greater than 75%.
Any idea.
Thank you very much
Hey Valot,.
One way to achieve this is HA admission control that does not allow a virtual machine to be turned on if the availability constraints are not met
http://www.VMware.com/PDF/vmware_ha_wp.PDF
Also chwck on http://www.yellow-bricks.com
Concerning
one
Maybe you are looking for
-
Why my compilation albums are placed in a section that is unique? I'd rather they were in alphabetical order like the rest of my albums. Anyone know how I can expose my music as I want. The people at Apple will continue to spoil the iTunes format or
-
Wireless network adapter not available on my Equium A300D
Hello I hope you can help; I currently have the Toshiba Equium A300D laptop. He has a virus and corrupt 1 of my hard drives, I can now t use, however I installed the operating system on my other hard drive, everything was fine until I try 2 connect 2
-
How to change the color of the graph automatically
Hello I want to trace several graphs with different colors. I wrote a program that performs the calculations in matlab even can trace in it, but I would like parcels to labview, it turns the color of all parcels is white. Can someone take a look at m
-
I have not been able to scan from the printer control panel in a long time, but I've always been able to browse webscan. All of a sudden which is no longer available. The saved Web page reflects my printr IP but the links on the homepage, scan, set
-
My Capture application is not synchronized with the cloud or other adobe cc applications. I tried signing off everything and resigned in. I also looked in the folder to archive. The folder to archive is empty. Libraries on my phone say "recovered re