A3 double-sided on a color laserjet cp5225 envelope

Similar Questions

• CP 5225: Print server for HP Color Laserjet CP5225

  We have a HP Color Laserjet CP5225. The printer has USB connectivity. There is a network (RJ-45) port, but it is disabled.

  We want to get the printer to print directly through the network.

  The HP Web site suggests Print Server HP Jetdierct ew2500 (HP CP 5225 is in the printer compatibility list). However ew2500 is not available.

  Please suggest a different print server for printer HP CP 5225.

  You should be able to use any wired usb print server.  The server does provide a connection to the usb port on the printer so if you can communicate with the server via ip, then you just to load the driver and connect the prnter as a local tcp/ip printer.

• Should there be locking plates and joints locking on cartridges on Color LaserJet CP5225?

  We ask the support of HP in Russia several times, but they cannot tell us:

  should there be blocking plates and locking seal on cartridges on Color LaserJet CP5225 or not?

  
  Maybe it is not the correct names for these articles in English, but I hope that my question will be understood.

  We just bought this printer and have a dispute with the store on this theme.

  It is a very major question for us in the situation.

  PS why the manufacturer regional technical support is unable to answer this simple question?

  P.S. We also wrote to Russian technical support via the HP web site and have no answer for more than two weeks!

  The cartridges are shipped in the printer and when you first power that they go through a process called alienation, the cartridge is 'open', so the toner is not in contact with the drum, closed power for the first time the toner cartridge and drums can work. in the United Kingdom, when the training I often show engineers one ankle clothing, we use Spring hanging out washing on a line, squeeze one end and the other opens, it is similar to the alienation, a cam turn, based on the cartridge and opens or closes.

  There are no seals or strip to remove, you unpack the printer, plug in and turn on, alienation is preparing the cartridges.

  There is a known issue with the loss of magenta or cyan, the symptom is the color will be poor and can fade in page or it is may be missing completely.

  One is there is a black plastic Panel, when you open the door, it is above all the cartridges, this can loose so that it touches the magenta or cyan causing loss of color, in some cases this Panel comes off when the printer is shipped.

  It can be difficult to see, but if you remove the cartridges you can see left and right panel is in contact with the metal frame (when you look up at the top of the cartridge cavity), in the Middle you may see a gap of 3 or 4 mm and the Panel may be a little lower When the alientates of the cartridge during printing it touches this Panel and rub off.

  If it is the plastic Panel, it can be very difficult to see the small space, we saw that several times in the United Kingdom and sometimes replace the Panel in order to ensure a good fit.

  I can't put the photos of this on an open forum and here, the opinion of HP is not public, so this is a situation that you would need to print test pages and HP would repair or replace if necessary.

  Without being rude, it would sound the store aren't give you good advice?

• CE712A: Driver for HP Color Laserjet CP5225 for Windows XP Professional

  I can't find a driver for my OP de Windows XP Professional 64-bit for my CP5225 printer. Can anyone help?

  In other words, the printer is connected to your network with a rj45 cable I guess.  If yes you must go to the information on the printer menu and print a Setup page that will give you the address ipv4 of the printer.  It should be something like 192.168.1.12 now on you computer xp go to printers and faxes and add printer.  Local printer and do not check autodetect, then and on this screen, click on create a new port and the menu drop-down select standard tcp/ip, and then click Next. Type the address of the address of the printer (ipv4) that was on the configuration page and just keep on going until you get to the page of decision-makers.  On the left choose HP and will work on the Strip right down to Color Laserjet 8550 PCL or PS as long as one or the other, and then click Next and change the name to HP CP5225 or whatever you want to call the printer and you can check on this page to make it your default printer.  Complete and you should now be able to print to the printer.

• PrintPagesSilent using to print the PDF with double-sided printing and color

  The use of VBA with Acrobat 9.0 code library.

  I have an application that prints the PDF files that are stored on a network drive.

  I can print PDF files using PrintPagesSilent, which prints the file to the default Windows printer.

  However, I want to be able to specify in the VBA code if I want the file in duplex or printed in color.

  I can do this in access using the Printer.Duplex = '2' or Printer.Color = '2', but they do not change the windows default printer settings and therefore do not change how PrintPagesSilent prints.

  Can someone shed some light on how I can set these parameters to accomplish what I need.

  Or maybe another solution I didn't think.

  Figured out, or at least a work around.

  Found a VB code that can change Windows printer settings.

  All I had to do was create a module and then call SetPrinterDuplex before you print the pdf file, and then again to change it after.

  Here is a reference for anyone interested.

  http://support.Microsoft.com/kb/230743

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• OfficeJet pro 8600 double sided printing smudges

  I try to print paper double-sided on 200gsm (color) on our new printer 8600 & apparently smudge or smear the first page at the end.

  When it prints the first page & begins to push out of the printer (where it is said that its drying) before pulling back in print on the other side, it comes out ok, but when printing is complete, it has black ink stained all over the front page.  The back of the back page looks perfect.

  Hey dinkidi,.

  What are the parameters of paper what do you use in the driver when executing this print job? (E.g., type of plain paper and best quality printing letter size)

  Have you tried to remove the filter to switch at the rear of the 8600 and wipe the rollers back in the printer with a soft, lint slightly damp with water?  In addition, try to wipe the rollers of the Ferris wheel inside the duplex unit.  It is possible that a small amount of ink rubbed off on the rollers of the printer.

  Also, please take a look at the information in the document found here.

  Let me know how it goes,

  Jason

• HP Color LaserJet M553: M553 - cannot print two-sided

  Hello

  We have a new HP Color Laserjet M553 (B5L24A) which is not allowing us to automatic duplex.  He is currently runinng via a Windows 2008 R2 server and is network connected via IP static on the Ethernet cable.

  I tried several steps of troubleshooting so far:

  -Several including UPD PS 6.0 5.8 PS, PS 5.5, PCL5 printer driver

  -Several print on print server objects

  -Confirmed the 'device settings tab' has the duplexer enabled on the local print server and print objects

  -Updated firmware for the last datecode 20150731

  -Tested printing from several applications, word, outlook, pdf, internet Explorer, textfile, etc...

  -The same problem happening to all connected users

  The printer accepts orders for manual, automatic duplex printing simply cannot.  No error messages didn't report on Panel print, printer, client or server.  Trying to get your hands on a 2nd M553 so that I can confirm a double problem or not.

  Feels like a problem with the firmware where he does not understand the command duplexing automatic normal or did not recognize the duplexer is installed.

  Any ideas?

  Your model is not the two-sided model.  The duplex model is B5L25A and will say about this M553dn not M553n who is your model.

• M277dw MFP: Double-sided COPY (do not print) with the ADF and MFP M277dw color printer

  This unit can perform a copy front and back on a pile of documents front / back, loaded in the ADF? (I know that it is able to copy both sides of a single page).

  In the list of options in control panel touch control for "duplex", it has classified 2 options from which to choose:

  1 - face to face 1

  1 - face to face 2

  It seems that I need a "2-sided to 2 faces" option, correct?

  It seems that the device must be capable of 2 faces double-sided COPY and more double-sided printing.

  I tried several combinations of different settings but cannot figure it out (if it is even possible) to take a stack of documents face 2. Put them together in the ADF and the output device an identical pile of copies 2 faces.

  Thanks in advance for any help/suggestions.

  Hey @AA10,

  Welcome to the Forums of HP Support!

  I see you try to double-sided copy on your HP Color LaserJet Pro MFP M277dw. There the duplexer to print system which allows you to print 2 sides, but does not have a duplexer built-in automatic document feeder. That's why you miss the 2 head to head 2 under the menu copy option. The two-sided to 2 in the menu copy allows you to copy documents two unique faces the printer would then print 2 sides. You must copy a page at a time and return them to make Copies in duplex.

  Please let me know if you have found this information useful.

• Unable to print double-sided on my printer HP (laserjet CP2025)

  I have a HP laptop and printer (color laserjet CP 2025) for about a year. When I bought the printer, it says that the printer is not compatible with Windows 7 - I didn't know this until I bought the printer. I had to reset my computer recently and now do not have the ability to print double-sided.  The printer works but I cannot print two-sided unless I have insert pages manually.  I had the ability to print two-sided before resetting the computer.  Help! It's the most frustrating experience, and I hesitate to buy another product from HP because of THIS BAD EXPERIENCE.  When under warranty, I was able to contact HP and received information on how to get the printer either fully functional, I can't do now.  Does anyone know how to get this function to work? Help, please.

  Thank you! I just had to disable manual duplex printing and my printer (2025dn) now prints on both sides of the paper.

• LaserJet P1102w: Double-sided printing will not turn off

  Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

  How can I get this fixed?

  Hi @Skunkeeper,

  Welcome to the HP Support forum.

  I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

  This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP LaserJet 6 L PS class: double-sided printing

  Hello

  I can't find the option to print double-sided Windows 8 when printing from acrobat reader (latest version) PDF files.

  From mac, a colleague can. How can I do for HP LaserJet 6 L PS class?

  Thank you

  Hello
  Make sure the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Now the impression on both sides should become available on the page layout tab.

  Kind regards
  Shlomi

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• HPlaserjet3390: My Laserjet 3390 offers more double-sided printing after upgrading windows 10

  My all-in-one worked perfectly but after windows upgrade 10 I can't solitaire to print double-sided and does not

  as one more option.

  How can I get print double sided once again.

  Make sure the driver knows that a duplex unit is present on the printer (assuming that one is):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  If the device does not have a double-sided hardware unit, then you can not do Automatic duplexing, but you should be able to do duplex printing Manual (print odd sides, reinsert the paper print same sides) if the demand for source document and printer driver supports this.

• HP Color Laser Jet CP2025: double-sided printing disabled in Windows 10

  I just upgraded to Windows 10 and downloaded the latest driver for my printer. I can't find any setting of double-sided printing. Is there something that I am missing. I tried to download the Toolbox, but it does not work on a 64-bit computer.

  The function "automatic detection" used by some (Windows) drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.