A30 - 203 hibernating then don't "wake up!"

Similar Questions

• Can I use the card WiFi Intel 3362U-1MPC in Satellite A30-203

  Dear all

  Can anyone help? recently I bought an Intel Wireless LAN 802 card. 11b / g P/A 3362U-1MPC with a Toshiba 7CN420401248 serial No.

  I don't have any idea what to do now, I bought it. My Question is? This point will be ok for my Toshiba Satellite A30-203 or not?

  If it is not then what kind I want and where.

  Thanks to you all
  Tandy

  Post edited by: tandy

  First question;
  Why you n t follow the first thread?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25158

  I discovered that the WiFi network is optional on the A30-203. If you can update the laptop with a minPCI wireless network card.
  After further investigation, I discovered that the Wireless LAN Card Kit PA3212U-1MPC may be compatible with your laptop.

  This can be ordered from the service provider authorized in your country!

  PS; I didn t find any info if your 3362U-1MPC is supported or not.

• Satellite A30-203 does not illuminate

  My Toshiba A30-203 does not start. Initially, the laptop kept closing after only 5 to 10 minutes (which I thought may be due to overheating), but now it does not start even upward. When you press the power button, all LEDs indicating to except the hard drive and power on the LEDs.

  Please someone help me with this.

  Thank you.

  Hello

  Try to remove the battery and unplug the AC adapter. Several waiting time (> 15 min) and then reconnect the battery and connect the AC adapter.
  Try to start the laptop.

  This is one way that is known to me. If it's not working so I guess you have a lot of opportunities and contacts him ASP is you last loophole.

• Remove the plastic box from Toshiba - A30-203

  Hi, I have damaged plastic, plastic case where appear of the stickers for the Proccesor and "designed for microsoft windows XP. Also so that it is the hand remains essentially where the keyboard and mouse are in. The laptop is Toshiba A30-203. I would like to help you to remove this part of the case, if it is possible without having to dismantle everything inside the computer. The purchase of a new box so I'm ready to go forward as soon as it is received. Looking forward to your reply,
  Thank you
  Daniel short

  Hi Dan

  Sorry, but I don't know if you will be able to do it alone. As far as I know that the technicians use special Maintenance manuals where is described exactly how to do this and in what order the parts to be disassembled or reassembled.

  Just after these instructions allow you to do it alone. The problem is that these instructions are not public, and if you want to do only please be careful. A small mistake can cause damage.

• Satellite A30 - 203 - didn't turn, just flashing lights

  My Satellite A30-203 does not illuminate. When I press the power button / nothing happens, but if I remove the power then when I press the power button all the lights other thanthe lights HD lights up and the power lights going outs and less than half a second after the rest of the lights will turn off.

  Is this what can I do with it?

  Hey,.

  In my opinion, there is nothing that you can do it sounds like a bad material work because Windows installation doesn t affect the startup procedure until Windows starts so you have a hardware problem.

  What you can try is the following:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=21

  If it doesn t work you need professional help from technicians of laptop I think
  ?

• Satellite A30-203 does not start

  I have a laptop A30-203. When turn on/off all the front lights indicates but unit not start

  Hello

  Try this:
  Remove the battery, disconnect the adapter from the laptop and wait a little bit more about 1 hour.
  Then reconnect the two parts and check if the laptop could start.

  If that does not help then I guess that a hardware problem serious cause this and you need someone who could check all parts laptop such as RAM, CPU or the motherboard.

• Satellite A30-203 WLan switch Fn + F8 doesn't work

  A30-203 mini pci installation pro 2200 pa3362 wi - fi.
  driver install without problem but radio on off switch problem. FN + f8 does not run!

  Hello

  I studied a bit in the internet and found information that this laptop is ready WLan. Then you should be able to update.
  But I put t understand your problem: not being able to use the FN + F8 option or you you are not able to activate the map with the switch on the side of the laptop?

  I think that the pine flooring is not a good idea, because if the wireless adapter is compatible and supported it should therefore works without any problem.

  Well, found a compatible Wlan card and it should be a Wireless LAN Card Kit PA3212U-1MPC.
  I think you should use the right card Wlan!

• Satellite A30-203: Question about the differences of memory modules

  Satellite A30-203
  512 Ram part no PA3312U - 1 M 51
  512 of Ram Part No. PA3312U - 2M 51, can someone tell me what is the difference between these two parts of RAM apart from the retail price.

  Hello

  The PA3312U - 1 M 51: 512 MB - SO DIMM 200 - pin - DDR 333 MHz / PC2700
  The PA3312U - 2M 51: 512 MB SO-DIMM 200 pin - DDR 333 MHz / PC2700
  http://UK.insight.com/apps/Productpresentation/index.php?product_id=TOEA048EF

  Sorry, but I don't see any differences.

• computer goes to sleep as soon as the ethernet cable is plugged in and don't wake up

  When the ethernet cable is plugged into my pc, it immediately goes to sleep and don't wake up without a difficult start. As long as the cable is connected, the computer will not load windows, immediately go to sleep before my desktop appears. My laptop is connected wirelessly without any problems at all and when connected with a cable, no problem either. ISP says it's a pc no matter not a modem problem, there is a conflict, but they don't know where.

  I am running windows Vista Home Basic, a cisco modem, do not know what model.

  Any help would be appreciated.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to check the parameters of the power management of the device on the network adapter.

  To correct the settings please follow these steps.

  (a) click Start, type device in the box start the search and then click on Device Manager in the programs list.

  (b) in the user account control dialog box, click continue.

  (c) in Device Manager, expand network adapters.

  (d) right click on the network driver and then click Properties.

  (e) click the power management tab.

  (f) click to uncheck the checkbox allow the computer to turn off this device to save power , and then click OK. If the option is checked, then uncheck the option and apply the settings.

  Once you have performed the steps, restart the computer so that the changes take effect, and then check the result.

  Hope this information is useful.

• Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

  Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

  Hello

  Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
  is a complete reset of the material.

  See if this applies:

  Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
  2008-based computer after hibernation: "Windows failed to Start.
  http://support.Microsoft.com/kb/95752

  ----------------------------------------------------------------------------------------------------------

  More troubleshooting:

  / Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
  1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
  Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

  Try the Startup Repair tool

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  ----------------------------------------------------

  If the above didn't help:

  At the prompt of the startup disk:

  Bootrec /fixmbr

  then

  Bootrec /fixboot

  See if you can boot from the hard disk

  If this isn't the case, restart on Windows drive:

  At the prompt of the startup disk:

  CHKDSK C: /f /r

  ----------------------------------------------------

  If necessary this 'peut' help: (not the same error however it may be useful)

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  ==============================================================

  If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
  Box stores) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• P1606dn don't wake-up car for new print job

  I have my printer is on my home network.  I use Mac computers.  I can print to the printer on the network of my three laptops more wireless, however, if the printer goes into sleep mode and I have send a new print job the printer don't wake auto.  To print, I have to manually turn on the printer, then it prints.  What is the solution to wake up off car for a new print job.  My old Brother printer would do that and it's maddening to have to go up the steps the Office to turn on the printer whenever I want to print.

  Hello

  The auto power off feature completely disable the device until a print job come back on, however, this requires a direct USB connection.

  For the network connection, you must disable the auto power off feature, the printer will always enter a power saving mode, but should be up and running once a being sent to throguh the network print job.

  Follow the steps below to disable the automatic mode:

  http://support.HP.com/us-en/document/c02860533

  Please let me know if this is useful,

  Shlomi

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• PA3212U-1MPC wireless card is compatible with Satellite A30-203

  Dear all

  Before you buy a PA3212U-1MPC wireless network card, which is compatible with my A30-203.
  Can someone tell me what 1MPC 3MPC & 4MPC what do these means to the end of the PA number?

  Best regards and thank you all

  Satellite A30-203 supports a standard Wi - Fi: 802. 11B.
  I found also some info on this card and it s certainly compatible with your laptop.

  > Can someone tell me what 1MPC 3MPC & 4MPC what do these means to the end of the PA number?
  I have no idea what it means perhaps that this consecutive numbering has something to do with the development material who knows

• External good DVD burner need for Satellite A30-203

  Can someone suggest a good external dvd burner for my A30-203
  I think I need to copy the videos of the laptop I think that their storage on the laptop uses a lot of memory.

  Can someone recommend / help please.

  Hello Ken

  It will be interesting to know what is your priority. Do you want ultra-thin DVD burner and take it with you or you want to copy all that at home.

  I ask this question because I used the old Satellite 1900 with external DVD writer. My old Satellite has USB 1.0 only and I bought the optical disc player placed in the external case and hooked up with my Satellite via the firewire port. I was very satisfied and data transfer was excellent. I must also say that desktop DVD burners can run with faster burning speed.

  Your laptop has USB 2.0 ports, and you can use the USB connectivity for external device. If you want to use at home I recommend you to use something like this. I had the same manufacturer. It works perfectly.

• A30-203 replacing hard drive?

  Hello

  Just a quickie. I need to replace the hard drive in my A30-203. "Im 99% sure that the"80 GB Toshiba MK8025GAS 2.5"portable HDD - 4200 rpm, ATA-6, 8 MB of Cache ' would be correct and working.

  Could someone confirm to me if this is the case and if not, what should I get?

  Thank you very much

  Adam.

  Hello Adam,.

  This HARD disk should work, but I have not tested! To play he course, you can contact a Toshiba Service partner and ask them if they have a tip for you