A30 - 714 overheating? before turning off.

Hi, my A30 714 is just over a year, and a couple of months he began to turn itself, maybe due to overheating. It can happen at any time, no similar applications, which can be general purpose, watch DVDs, or burning CD someone can help?

Hello

Check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2581

Good bye

Tags: Toshiba

Similar Questions

  • Why has my laptop started to randomly stop before turning off

    Original title: computer power questions

    Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way?

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need the help of a
    real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
    Support from the manufacturer.

    ===========================================================

    Check with these utilities to see if information may be collected: BlueScreenView run to see if
    There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
    seconds before) see the event log contains useful information.

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    =========================================
    =========================================

    More if needed and you think that the closure could related to the Options of food or sleep.

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
    type of hibernation - see turn Hibernate on / off

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

    I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

    How can I solve the problem and use the software again?

    If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

  • Hardware/OS changed before turning off, I can not install Ps e Lr

    Hardware/OS changed before turning off, I can not install ps and lr again on my second computer how can I fix it?

    Thanks in advance

    You can contact the Support from Adobe if you have difficulties to enable the publication to your computer.

    The links below may also help:

    FAQ: Can I reinstall cloud Creative if I get a new computer, my computer dies, or I have to reformat my drive?

    FAQ: How can I reset my activations?

    FAQ: How to contact Adobe for support?

  • Change selectBooleanCheckbox before turning off

    Using JDeveloper 11.1.1.3

    I have a JSPX with some selectOneBooleans on it. I also have a selectOneChoice. Given the value selected from the selectOneChoice, checkboxes should be disabled. Before turning off, I need to deselect them.

    All boxes have a partialTrigger to the selectOneChoise.
    This is the code I use in the valueChangeListener
        public void valueChange(ValueChangeEvent e) 
        {
            System.out.println("Setting new values");
            if(e.getNewValue() != null){
              PlantType type = (PlantType)e.getNewValue();
              if(type.getCode().equals("PLANT")) {
                plant.setIsWild(false);
                plant.setIsCultivated(false);
                plant.setIsList1(false);
                plant.setIsList3(false);
                chkWild.setDisabled(true);
                chkCultivated.setDisabled(true);
                chkList1.setDisabled(false);
                chkList3.setDisabled(false);
                
              }
              else if(type.getCode().equals("FUNGUS")){
                plant.setIsList3(false);
                chkList3.setDisabled(true);
                plant.setIsListedAsterisk(false);
                chkAsterisk.setDisabled(true);
                chkWild.setDisabled(false);
                chkCultivated.setDisabled(false);
                plant.setIsWild(false);
                plant.setIsCultivated(false);
                plant.setIsList1(false);
                chkList1.setDisabled(false);
                
              }
          }        
        }
    An example of a checkbox control:
    <af:selectBooleanCheckbox id="wild"
            text="#{bundle.plant_wild}"
           value="#{pageFlowScope.plantBackingBean.plant.isWild}"
           binding="#{pageFlowScope.plantBackingBean.chkWild}"
           partialTriggers="plantype"/>
    This is what is happening in the UI:
    When I select all the boxes and move from fungus to plant, disabled checkboxes keep activated.
    When I change of BOF plant to fungus, they are unchecked.

    I'm doing something wrong here?
    I also added a few exit my plants and my grain of support to find out when the getters and setters are called:

    When I change from fungus to plant, it is the output:
    Definition of new values
    Raging boolean
    Raging boolean

    I get the same when I go from plant to fungus so I do not know that the EL really returns the correct value for the checkbox control.
    Maybe this could be a problem because I turn off the box and therefore does not allow the change of the user interface or something like that?

    How can I solve this problem?

    If immediate = "true" = "true" autoSubmit is set to the SelectOneChoice it is a partial trigger for the boxes, and then set immediate = "true" on the checkboxes too, if phase JSF "Update Model" would be ignored of the boxes.

    Dimitar

  • Satellite A30 - radio WLAN is turned off

    I just installed a mini-map broadcom wireless and drivers for my Satellite A30 which shows as working, but when I try to connect, it tells me that the radio is turned off.

    I tried the switch on the left side and press F8 but nothing seems to happen.

    Hey,.

    Before you start a lengthy discussion, you you connected your wireless card WLAN antennas?

    Or let say, it's your laptop equipped with two antenna cables? Usually it s a black and a white cable you need to connect to the wireless network card.

    See you soon

  • Power down, windows 7 sets the Verr Num led on just before turning off

    I have a Fujitsu 101/102 PS/2 keyboard connected on a 64-bit windows system 7.

    Recently, my motherboard has failed, and I installed a new motherboard, where I had to do some basic recovery for windows 7 to come.
    Because then I find that when I turned off the system, during the eve of the sequence, when I get the screen power off mode, the indicator (Led) NumLock on the keyboard is turned off first, and then just before that the system turns off the Num Lock Led is lit once again and of course remains on until I then use my PC.
    I would like to get a solution to this problem.

    The State of the Num Lock is determined by the BIOS during POST (Power On Self Test). It is not defined by Microsoft during the power down, but the BIOS of your computer can trigger the light briefly during a stop.

    If you enter the BIOS of your computer during the power upward (F4 maybe?), you should be able to find a framework that governs the State of the NumLock at startup. Change this option to what you want and save your output settings.
    The BIOS settings are retained by EPROM chips on your motherboard, which explains why things have changed with a new motherboard.
  • Port before turning off wi - fi on Linksys WRT1900AC

    I have a Linksys WRT1900AC router. I tried to port forward Port 53 (UDP and TCP) and wi - fi wireless was turned off. Anyone know what my problem is? Is there any solution for this?

    In addition, I have forwarded port Port 3074 (UDP and TCP) as well as Port 88 (UDP) without any problem on the WRT1900AC.

    I don't know about that.

  • My Satellite keeps overheating and turning off

    My laptop satellite keeps overheating and stopping when doing hard CPU work. The thing is if I open power management and keep the reset of the method of cooling performance max speed up the fan and it cools.

    It does not seem to adjust the speed of the fan if left only you I have to keep changing it and in a minute or two, it slows down again and then have to change once again at the speed of the fan to the top.

    No idea why this is happening and how to fix it? Grateful for any help. Thank you arran

    Hello

    In my opinion your laptop should be cleaned in professional way. I put t know why you n t mention which model of laptop you have, but I know that some models are not easy to clean because of construction and must be dismantled.

  • HP Pavillion G6: hp will continually turn off but cpu 48 - 49 c temp

    Help, please! I love and need my laptop! I have a Pavillion G6-2200.  In December I started having overheating problems. I was able to clean a very dirty fan and for the last three months, that it worked perfectly, well except that I couldn't use my wireless. Then on Friday he just stopped. I could not turn it back on for several hours and then it turns off again. I cleaned and replaced the thermal paste on the heat sync. I cleaned the fan and low load cpuid. Now I can turn it on and it will work for about 10 minutes before his arrest. It turns but obly after I remove and replace the battery.  Here is a screenshot of the newspaper of cpuid. Any help would be greatly appreciated.  Thanks in advance.

    Hi @Calipurp,

    Welcome to the Forums of HP Support!  I understand that you have a problem with the computer overheating before turning off. I'll be happy to help you.

    Please follow all the steps of reduce the heat inside the PC to prevent overheating and laptops HP-HP CoolSense technology.

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • Satellite A30 is turned off

    Hi, not for a long time my laptop started to turn itself off (don't bang no power) it does that when either im doing a scan of viruses or download on my site. He really started to irritate me. It seems what to do when the fans at full speed... PLEASE HELP ME

    [Edited by: admin April 23 05 08:15]

    I had same problem, and my support of toshiba insisted that it was a software problem, even a virus like the laptop was turned off during the scan. the problem in my case was a clogged vent and overheating resulting. It was clogged with dust so that even when the fans were going at full speed, the device overheating and turning off. even your soundsd unit as it is overheated.

  • Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

    A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

    I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

    To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

    I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

    The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

    Your thoughts will be greatly appreciated...

    WTF?

    What is an unmoderated forum?

    Can someone help with my problem?

  • Re: Satellite A200 - overheats and turns off

    Hello

    I had a problem with my A200 series. It heats up to something like 40 ° - 50 ° C, what should I do?

    I rarely hear the fan inside, I seldom spend my laptop off aswell

    Please help me; thx a lot

    Hi kerplunk36,

    I put t know how you checked temperature internal 40-50 ° C, but if this would be the case, everything is ok. That s pretty good temperature and normally nothing should be overheating or turn off.

    Right now I can recommend Notepad using compressed air cleaning spray. This could blow in the form of dust fans cooling and, therefore, it of not necessary to disassemble the laptop. As you can see is a very easy and fast way to clean.

    Check this box!

  • Journe Air 810 turn off

    I had one of these years and recently has been to play with the settings (Yes, silly me!). I put the car at 08:00 and automatic stop at 22:00, but it turns any now!

    I tried to use the reset on the back of the frame, but it just shuts off and turns on then again very briefly. It does not even reach the homepage before turning off. It is connected to the power grid for hours is not the battery.

    I am pulling my hair and can't even find a manual online! Can anyone help please?

    Thank you very much

    Louise

    Hello

    > Impossible even to find a manual online! Can anyone help please?
    The manual can be downloaded from Toshiba Web site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download user manual

    Maybe you can find useful information. ;)

    If not, ask a maintainer agreed to help. Guys need to know what to do now.

  • When I turn off a Dell ESXi 710 guests and Compellent SC8000

    I get emails from the controllers saying Compellent connectivity is lost.

    I just need to check the box "don't show alerts when connectivity to the server is lost" before turning off the server to stop these messages for this period?

    See you soon,.

    Bilal

    Well Yes, that's all!

    It will keep the setting if you do not need to do each time (even if you can it in case you place a server HBA or something).

Maybe you are looking for