Similar Questions

• WSDL: Input connections OPA

  I created an entity in the data model. Under this feature, I am agreeing that two-way relationship (many to many). By my requirement, for the entity, max entry may have other data must be defined known but without data.
  How usually to entry of multiple relations to the same entity in the OPA?

  As in the wsdl, below is the format for relationship-node, but if I insert this format, I get an error message indicating not able to analyze the relationship of nodes and this can not be determined in the rules.

  
  < typ:relationship - node id = ""? "relationship id ="? "id-entity-source =" "?" source-instance-id = "? "hypothetical instance =" "?" id-entity-target = "? "State =" "?" deducted = "? "beginning-relevance =" "?" end-relevance =""? ">"
  <!-zero or more repetitions: - >
  "< instance id typ:target ="? "/ >
  <!-in option: - >
  < typ:properties >
  <!-1 or more repetitions: - >
  "< typ:property key ="? ">? < / typ:property >
  < / typ:properties >
  <! - you have the CHOICE between the next 3 items at this level - >
  <!-zero or more repetitions: - >
  < typ:relationship - node / >

  
  Attempt-1: FAILURE
  < typ:relationship id = "coveredPerson" known = 'true' set by user = "true" >
  < typ:target instance id = "entity_person1" / >
  < typ:target instance id = "entity_person3" / >
  < / typ:relationship >
  "" < typ:relationship id = "potentiallyCoveredPerson" known = 'true' set by user = "true" / >

  Attempt 2: FAILURE
  < typ:relationship id = "coveredPerson" known = 'true' set by user = "true" >
  < typ:target instance id = "entity_person1" / >
  < typ:target instance id = "entity_person3" / >
  < / typ:relationship >
  "" < typ:relationship id = "potentiallyCoveredPerson" known = 'true' set by user = "true" > < typ:target / >
  < / typ:relationship >

  Enjoy your entries.

  Kind regards

  Mohan

  Mohan,

  The problem with your request, it's that you don't speak any relationship does not exist.

  According to your description, there are relationships not called 'relationship_PlanA' or 'relationship_PlanB '.

  You must set the id of an existing relationship relationship in your model of data, for example: "plans of the person".  However, it's pretty redundant because plans must exist under a person in any case, they are contained by entity of the person (see my last post).

  If you are having trouble understanding how your modules results in xml format. I suggest that you try the specific wsdl. This will give you a very explicit xml format that matches your data model and will give you the less room for error.

  See you soon

  Frank

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• Analog inputs measures with NI6229 using the DAQmx driver

  Hello

  I have four different analog inputs connected to ai0 to HW 6220 ai3. I read these values with a single task, all 4 channels assigned to this task. When ai0 reads 7V, I see 0.8 V ai1 too, but I expect to be measured 0V. If I just assign ai1 to the task and measure all 4 channels, then I measured 0V as expected (although ai1 contains 7V, I just don't measure it).

  Another comment 'funny', is that if I change the order in which I add channels to the task, measurement errors are different.

  However, when measured with a multimeter 4-channel show tensions as expected.

  Given that my calling task is can not block, I call the function

  DAQmxReadAnalogF64 with timeout = 0 and numSampsPerChan = 1.

  Any help is appreciated.

  Thank you

  Kind regards

  Deepa

  Deepa,

  Thanks for the code snippet.

  When you call DAQmxReadAnalogF64 the first time and you set a value of timeout of 0, there is a chance that the acquisition is not yet initialized. This is the expected behavior and should not be a problem. If the timeout error died at the first call, you might ignore it or set a different expiration time for the first call only. In all cases, you should drop the first value and start with the second value.

  Jochen

• Upgrade the forces ' no more connections can be made... "message from XP Pro for... what? A server? Win 7?

  I have a pc four network all current XP to run. System has XP Pro. Since the addition of backup Carbonite has I run its 'input connections' when I try to access the network by the error message "no connection is possible to this remote computer at this time because there are already as many connections as the computer can accept." I reduced the AutoDisconnectTime of 15 minutes to 2 minutes perhttp://support.microsoft.com/kb/314882 with no benefit. I ran Netstat and TCPView with no illumination. So far, the Council must "upgrade server" or possibly for Win 7. Or the other of these works would be? Re 'server', I have no plans to add a fifth pc system. Can I just replace XP Pro on the system has a server sw offer? What server sw? If I take it will be all on system A look and operate as it does now - with the exception of the fixing of the problem?

  Monday, January 31, 2011 20:06:34 + 0000, Petermat wrote:

  If I go for Win 7 is the fact that I have four systems means that I have to buy two copies of the upgrade "three pack? I don't want to maintain both XP and 7 if I can avoid it.

  You are right that you can't use a pack of three on four computers. You
  buy two packs of three - or, better, a pack of three and a normal life
  a package.

  Ken Blake, Microsoft MVP

• 23 - d060qd envy: input set Windows 10 Upgarde HDMI port no longer works

  Just updated my PC Envy 23 to 10 Windows desktop computer.  I have a game on the PC HDMI input connection that I use in conjunction with my work laptop.  After the upgrade when I press the button for the game of entry so I can see my laptop using the view envy, nothing happens.   Is there a setting that needs to be changed 23 WANT to receive entrance to the laptop?  Help

  I've updated the hp my display application and it started working

• Audio connections on the back panel of XPS 8300

  Audio connections can be found in the Installation Guide PDF differ from my XPS 8300.  The Guide of SU watch 6 connections (in 2 rows of 3) in the middle section (above the expansion card slots) who perform the following fintions;

  The top (from left to right) row - connector Surround l/r Surround l/r rear connector, Center speaker connector

  Row of the bottom (from left to right) - Microphone connector, front l/r output connector, Connector Line In.

  My machine has 5 connections colored in the lower expansion slot, but I have no other document indicated which entry do.

  Connections (running from left to right looking at the rear of the machine) are black, Orange, grey, green, blue.

  Can someone tell me what color does that work?

  Thank you very much

  OldKingCole,

  Black = line 4. Connect the rear left and rear inputs right on analog speakers
  Orange = line 3. Connect the inputs before central and subwoofer on analog speakers
  Gray = line 2. Connect the inputs left and right on analog speakers
  Green = line 1. Connect the inputs front left and front right analog speakers or headphones
  Blue = entry. Performs a function of two in one, take over the input connections microphone and Line In

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.

• Impossible to establish a VPN connection with a router configured as a Cisco server using client VPN 5.0.00.0340

  Hei guys,.

  Please help me on this one because I'm stuck enough on her...

  I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.

  This is an extract from the log:

  130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
  Peer supports XAUTH
  131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
  The HASH payload received cannot be verified
  132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
  Failed the hash check... may be configured with password invalid group.
  133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
  Impossible to authenticate peers (Navigator: 904)
  134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173

  I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass

  My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
  -2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.

  Behind the second router there is a virtual XP machine on which I have installed VPN client...

  My connection entry in the customer is to have the following parameters:
  Host: 200.100.50.173 , //which is the IP address of the VPNServer
  Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.

  I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.

  Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled

  and the VPNServer router logs the following error message when you try to establish the connection:

  * 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  * 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  

  You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?

  Thank you

  Iulia

  Depending on the configuration of the router, the group name is grup1 and the password is baby.

  You also lack the ipsec processing game that you would need to apply to the dynamic map.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml

  Hope that helps.

• Cannot connect AnyConnect Secure Mobility Client IPSec 3.0

  Hello

  Our company has a configuration of IPSec VPN on a Cisco ASA 5505.  We previously using the Cisco VPN Client - Version 5.0.07.0410.  Everything worked well with this customer to date.  The problem is it is not supported in our Virtual Machine, and environment with our new version of our networks paravirtualized drivers we get the problems of inadequacy HMAC and not connect to.

  I created a file .pcf with the following information for the 5.0.07.0410 customer:

  Input connection: VC VPN

  Description: no

  Host: xxx.xxx.xxx.xxx (IP address of the Interface of the ASA VPN)

  Authentication group:

  • Name: The name of the Group
  • Password: password for pre-shared Key

  Transport:

  • Activate Transport tunnel
  • IPSec over UDP (NAT/PAT)

  I import the .pcf file in the client, the client connects, you are prompted for AD username - everything has worked well.

  We have currently met that he had to use the Cisco AnyConnect Secure Mobility Client (3.0.0629) - I tried to use the profile for that AnyConnect client editor and I can't not all profile options.  I leave all the defaults preferences (Part1), preferences (Part2), backup servers, matching certificate, Certificate Enrollment and the mobility policy.

  I in the list of servers, click Add.  I enter in the hostname, host (the host name IP address) address and group.  There are no backup servers, I change the main IPSec protocol, save the profile and place it in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile (Win7).  Open the AnyConnect Secure Mobility Client and the profile is loaded. Trying to link returns "VPN Agent is unable to establish a connection."  ASA, I don't even see a connection attempts to the outgoing IP address.  On the client, I can ping the ASA and connect with ordinary VPN Client.

  I can't find a place to enter a pre-shared in the profile editor.

  The AnyConnect client seems also not to read the .pcf files.  Am I missing something here?

  My package DART from the failing client is attached.  Any help would be greatly appreciated!

  Kind regards

  Rich Alto

  Rich,

  AC uses IKEv2 (for IPsec) which is not yet supported on SAA. Support is planned for 8.4 ASA which is still at least a few weeks.

  HTH

  Herbert

• Missing for DBAdapter cluster Weblogic Congfiguration outbound connection Pool entry

  Hello

  When I created an entry for outbound connection pool in DBAdapter weblogic console in a clustered (1-Admin server and servers managed by 2) environment and updated adapter DB, I have identified only input connection is updated in that plan a managed server and other server managed, it is not updated. For this reason, we are unable to access the data sources for some requests for the application.

  As a work-around if we plan. XML file to another server managed manually with update and DB adapter connection entry, we are able to find the entrance of connection for managed servers.

  Outside work around there at - it another solution to this problem so that I can add a connection adapter DB Console entry that will update the two plan files.

  Thank you and best regards,

  Vincent

  Can I propose to maintain the file plan of shared drive accessible from all nodes in the server, this will reduce the manual work.

  Concerning

  Albin I

  http://www.albinsblog.com/

• stream audio getUserMedia dies after 5 seconds

  After about 5 seconds to work correctly, the audio icon disappears from the address bar and the flow becomes constantly zero.

  HTML to reproduce:

  < script >

  function gotStream (stream) {}

  var audioContext = new AudioContext();
  var entry = audioContext.createMediaStreamSource (stream);

  var node = audioContext.createScriptProcessor (4096,2, 2);

  node.onaudioprocess = {Function
  var vals = e.inputBuffer.getChannelData (0);
  Console.log ("Max", Math.max.Apply (Math, Vals), "min", Math.min.Apply (Math, Vals));
  };

  Input.Connect (Node);

  var zeroGain = audioContext.createGain ();
  zeroGain.gain.value = 0;

  node. Connect (zeroGain);

  zeroGain.connect (audioContext.destination);
  };

  var analyserContext = false;

  function initAudio() {}
  If (! navigator.getUserMedia)
  navigator.getUserMedia = navigator.webkitGetUserMedia | navigator.mozGetUserMedia;

  navigator.getUserMedia ({audio: true}, gotStream {Function)
  Alert ("error getting audio'");
  Console.log (e);
  });
  }

  window.addEventListener ('load', initAudio);

  < /script >

  After having noticed not all the web apps audio suffers from this problem, I started digging around and found this behavior related to the determination of the scope (!).

  Essential-, it seems that at least a part of the audio pipeline must be global so he could continue to work. For example, by adding

  window.horrible_hack_for_mozilla = input;
  

  before " var node =" fixes the behavior.
  

• Can I use an Apple TV on a Mac mini/TBD instead of a TV?

  I bought the 4th generation Apple TV yesterday. I don't have a TV, so I use streaming on my Macbook Pro (early 2013) or Mac mini (end of 2014), often using AirPlay. I read somewhere that any Mac with the HDMI connector will be able to connect to the Apple TV. However, when I haven't tried to put in place last night on my Mac nothing happened - no screen set. Then I created mountain BIKING with my projector and it worked fine, so I used it for a few hours.

  My mac mini is connected to my Thunderbolt display. My plan was to have next to the mini ATV, connected via HDMI and we hope to activate and use the ATV through the TBD. Is there a reason why wouldn't this configuration? Or I have to change any input or output parameters?

  HDMI ports are not multi directional.  There are inputs and outputs, nothing which does both.  HDMI ports on computers came out.  On the ATV HDMI port is out.  Ports HDMI TV came.  Projectors have entered HDMI.  As the birds and the bees, inputs connect with outputs.

  I appeciate wanting to use your Thunderbolt display, but unless you can find an HDMI input or an adapter for HDMI output in thunderbolt (not the reverse adapter which are common), you're out of luck.  You would need to connect directly to the screen.

  Apple TV has been designed to serve your HDTV display...

• Z240: Graphic Resolution on Z240

  I try to configure my new HP Z240 workstation, but cannot get the graphics card to run at any resolution above 1024 X 768. The graphics card is a NVIDIA QUADRO K620. It is connected to the display with a DVI - D dual link cable. The monitor is an HP w2408. The monitor has two inputs (DVI and VGA). I have the VGA input connected to another HP computer with a card NVIDIA GeForce GT 610 (this computer/card/monitor displays at 1920 x 1200). When I checked the adapter (using the list of modes option) modes, listed the best mode is 1024 x 768. NVIDIA sheet lists the max resolution with DVI - I in 2560 x 1600 or 1920 x 1200. What can I do to get the most out of my screen (1920 x 1200) resolution?

  Update.  Problem solved. When I realized that the monitor in DVI mode was not recognized as PNP, upon the screen as the problem. Installed new monitor, everythng is working as it should. Of course the the old monitor VGA input worked fine while the DVI part was defective (card or cable connection).

  Dave6666

• Measurement of current and voltage USB-4065

  I have an application where I need to measure the direct current and the voltage. The current and voltage will be stable if the measures do not need to be simultaneous. I would use a USB-4065 to the two measures. I've seen the kb indicating the voltage inputs must be disconnected when the measurement current. The current inputs must be separated for a measure of tension?

  Hi Collin,

  I think that you are referencing this knowledge base.  After a few tests, and worked with the R & D group, it seems that the effects of input connections are perceived during the passage of two ways.  When the current entries are connected, a less accurate voltage reading occurs.  As such, please disconnect the current inputs for a measure of tension (as well as disconnect with tension when taking a measurement of current entries, who you know).