A40 and supply

Similar Questions

• e business financial and supply chain

  Hi all

  I already install E - BS 12.1.1 everything runs smoothly

  but no any link to financial chain and supply.

  Best regards.

  You are welcome

  If feel your post is answered its always good to close the debate.

• How to get the key for windows 7 already installed and supplied with the laptop.

  I bought Lenovo laptop, 2 years back, and he had windows 7 Home premium.  Now it is showing my windows cannot be real and asks for the key for verification. Key was written on a label on the back of my laptop. The key is now unreadable on the sticker. I'm looking for the key to verification?

  If the product key on the COA sticker is damaged, then your options include:

  Reinstall Windows 7 using the supplied with your laptop Lenovo recovery partition:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do and request replacement CD-ROM

  If these options are not available, you will need to purchase a new product key for Windows 7 Home Premium.

  You can also try to do a restore of the system before you start, facing this problem to see if suits him.

• E530 battery drain and supply Manager problem

  Hello

  I don't know how many people answer the question similar than me.

  My E530 battery drains 5% a day after power off.

  I searched online and someone else has complained about a similar question on his laptop Y series. His problem has been resolved by plugging the power supply cable before turning off the laptop. Lenovo also updated the BIOS on this subject for its model then.

  Yesterday I tried his way and the problem disappeared also.

  Lenovo update the BIOS on this subject does Thank you.

  I also find that the power management mode does not work. He always charges the battery from 96% to 100% in any system, I chose. I tried to uninstall the driver, and downgrade the power manager, still does not work. I tried not to reinstall the system, because it's much too long. Whatever I installed win7 on my SSD?

  
  

• Satellite Pro A40 and F-Secure

  Hi all

  I thought I'd share a recent experience with you all:

  I was shopping a new anti-virus program and thought I'd try a few versions to test first to see that it fits my needs better before parting with my money. Taking care to try only one program at a time, I loaded a trial of F-Secure Anti-virus (download from their own website). When I tried to install it, he insisted that I uninstalled a few other programs first including Ad-aware SE, I did to avoid conflict.

  At the end of installation, I restarted Windows XP Pro as instructed, to see that after login Windows, little or no progress was made to load every startup programs usual.

  I systematically enabled and disabled in each program to see where the start was not and found very quickly that whatever this is vaguely related to security caused a software conflict of one kind or another, including anti-spyware WinCleaner and Zone Alarm Pro. It seemed a bit strange to me that I need to disable the firewall, so I uninstalled F-Secure Anti-virus and another program installed antivirus instead.

  I am now using Kaspersky Anti-virus instead, with all my other programs security running with no problems.

  It may have simply been an isolated case where I just had an unlucky combination of the hardware and software, or maybe the version of F-Secure, I had was not install properly, that it in either it didn't work so I thought I would let you all know and hopefully save someone else the frustration and inconvenience...

  Hi Graeme

  Thanks for posting about your experience. To protect my house specifications, I use Avira AntiVir PersonalEdition and ZoneAlarm. I use both of them for about two years and so far I didn't have problems with the virus. From time to time also use Ad-aware SE.

  I noticed that many applications need a lot of CPU activity antivir while running in the background.

  Bye and good luck!

• 13 elements Photoshop for PC after the installation and supply of series says "not genuine Adobe software and seems to be false.

  This software has been purchased from a reliable source in an unopened.

  Why the message?

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• Point of booking and supply / demand

  Oracle 11.0.3
  
  For some reason there is something certain orders always fills to the poster in reserves. Someone can you please say why they are not deducting the amounts on-site and endangered?
  
  Thank you!

  So that the reservation be cleared out, delivery details (shipping transactions form) must be confirmed ship, and the interface of the inventory completed ok. Orders can be closed after the ship confirm completion OE interface (even if the inv interface does not).

  In the form of maritime operations, once found the line, go to the Help menu > Diagnostics > examine change the value of 'field' in INV_INTERFACED_FLAG... check if it is "Y". If this is 'P' then there is an error in the interface and you will need to examine errors in responsible for the inventory in the flag interface... Open Transactions or re-run the travel stop Interface interface INV only (with active debugging).

  If none of these work, you migh need to connect a tar for this checking and if the transaction was indeed interface for inv then you might need to run a cleanup script... check Metalink for this script.

  It may be useful

  Fabio

• Satellite Pro A40 Caps Lock power with many keys on and off

  Hi guys,.

  I have a Satellite A40 and it has become a pain. First the caps lock keys not working, has no importance. Then I realized that if I pressed ctrl + C caps work come, now ctrl c z x c m and v all do caps on or off.

  You can not use!

  I use an external keyboard, which I think will work. Have you tried some form of downloads of this site but it is not changing.

  Any ideas would be appreciated.

  PS I have no games on it.

  Hello

  Well, it's not easy to say why this dysfunction occurs.
  You can try to use the System Restore tool. This can help to set the operating system to the beginning.

  Also if it helps doesn t, I would recommend to recover the operating system with the supplied restore CD. (Please make a backup of your files.) If the problem still the same after this procedure so I think it's a hardware malfunction and you contact the agents of control services.

  Good bye

• Time Capsule do not pick up address DHCP and cable modem...

  You just bought a Time Capsule and a couple of Airport Express. If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  That being said, I tried to create a mobile network instead of pure wi - fi and am studying various behaviors that are not as expected when I rear hub to the Internet Time Capsule, but need to isolate and go 1 bit at a time... (it works not as well as suggest Apple instructions on homelessness of installation)...

  If:

  1. configuration of the modem cable shows that DHCP is 'ON' and supplied address range 192.168.0.x by 192.168.0.y,.

  2 Cable modem wireless is disabled,

  3 Time Capsule Wan is connected to the cable modem, Ethernet

  4 Time Capsule is configured to request its address IP, DHCP

  5. Airport Express is in Bridge mode and have addresses such as 10.x.y.z (appears to be from a Time capsule).

  6. safe as Time Capsule is set to be as DHCP and NAT

  7. There is NO other device in this configuration connected by Ethernet except the cable Modem and the Time Capsule.

  So, why is the IP address of the time Capsule 76.181.45.xyz? (The address is NOT in the range of the DHCP as described in the #1; it is not supposed to be?) ....

  Whence this address?

  A friend says this address puts the "other side" Time Capsule of the cable Modem, directly on the Net?... (Shouldn't worry?) ....

  If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  It's because you didn't have the devices connected via Ethernet before you set up the. Given that the installation utility saw a wireless connection, it is assumed that this was the way that you want to connect devices on your network at all times... so he put it this way.

  If you had an established connection Ethernet before you ran the installer, then the utility would have detected this connection and set up the airport to "expand using Ethernet", does not extend to assistance of wireless.

  (it works not as well as suggest Apple instructions on homelessness of installation)...

  If all goes well, you don't talk about this document... Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo... .. Since the 'how' information in this article is at least 4 years late, bear little resemblance to the latest version of AirPort Utility and some of the information are simply not true.  This document if trash is what you... He'll probably do more harm than good with regard to the details of setting.  The article is OK for basic general information, however.

  6. safe as Time Capsule is set to be as DHCP and NAT

  It should not be if your modem is a modem/router "" or type 'bridge' of the device which is also DHCP and NAT services. The fact that you have disabled the wireless on the device confirms that it is both a modem AND a router. That being the case, then you have two devices that both struggling among themselves to try to control the same network... AND do you also have a network error called Double NAT... something you don't want.

  Probably the best at everything again and provide us with the number of brand and model of your "modem", that we can confirm what it is that you have, then the correctly configured time Capsule to work with this device. Once the time Capsule is set up correctly, it will be easy to put in place the other airports.

• Change HDD on Satellite Pro A40

  Hello!

  I have a hard drive dead in my Satellite Pro A40, and I would like to replace it.
  Please tell me which model suits me. The size of 40 to 80 GB hard drive.

  Thank you!

  This old model was offered with 30 GB, 40 GB or 60 GB HDD. In my opinion you shouldn't have any problem, upgrade with 80 GB or even with max 100GB / 120 GB HDD.

  For example check please model Toshiba MK1032GAX. It is the old model with IDE interface and must be perfect for your machine.

  Incidentally: of course this old piece of equipment can scale up to 2 GB of RAM. How do you currently use? What operating system do you use?
  Sorry for the question, but it really is fascinating that many people still use old machines WXP. :)

• Port USB and IPOD SPA40

  Hello

  My ipod does not work with the USB ports on my SPA40.
  The USB port works, it works with my IPOD shuffle and other devices usb card reader, flash memory cards. The IPOD works because it works via USB on my other laptop and work through my card in PCMICA firewire on the A40 and the laptop.

  I need advice about what to do next.
  Is there a simple way to check what motherboard is inside my laptop?

  Thank you
  Ian

  [Edited by: admin 8 June 05 20:52]

  Hi lan

  I'm not sure you know what motherboard is inside your laptop. Y at - it the same problem if you use USB messages with other external devices?

  In my opinion, you should check on the Toshiba site if there is a new version of the BIOS available and maybe update the BIOS can be useful.

• What is HD-maximum capacity for Satellite Pro A40?

  Hello together,

  I got a (PSA45E) Satellite Pro A40 and now I need a new hard drive.
  My question is now, what is the maximum capacity for a hd you can plug in and are very by the BIOS?

  Thanks in advance.

  Doc

  Hello

  I think this old laptop HARD drive with IDE interface, so I think the upgrade up to 120 GB should be possible. I think that 80 or 100 GB should be enough for this good old classic.

  I hope you aren't the guy who wants to have 500 GB. :)

• Qosmio G10: Entry Composite and WinDVD creator

  I have a Qosmio G10 and WinDVD creator 2, such that comes with the machine. I am trying to copy some old VHS tapes on my HDD using WinDVD creator and the composite entry next to the socket (connected on VHS by the SCART and supplied adapter)

  WinDVDc is not see anything at all to record from, and even less the composite input (which works fine when I press the "input select" button right next to the adjustment of brightness on the machine screw). I cannot therefore see or record through my TV signal analog, which is near the top and works very well in MC. I can record using MC but trust the dvr - ms format it uses is not editable and is much too inflated.

  I also tried to use nerovision for the same purpose, but I get an error message saying "capture device is already in use...". ».

  Sorry if it's a question of intervideo, but Tosh forums seem more useful.

  Help!

  Hey Jake

  Watch download drivers (the valid section for your model and OS) for a registry patch. Take a look also at the info for it. I think this should solve your problem. This means that you will get the Composite as a data source in WinDVD Creator valid entry.

  Good luck

  Tom

  Post edited by: Tom Mannerhagen

• Satellite Pro A40: question charger

  I hope that someone may know the answer to that. I have an A40 and over the weekend the charger packed in. Its a powerpack 15v 5amp. I have a spare part for my old Satellite, what do I know works, but not being able to the A40.

  The rating on this pack is 15v 3amp. Does make a difference, and therefore the A40 will not power up/load, or did more damage I have originally thought.

  I hope it's just the side ampage causing the problem, so I just buy a replacement for powerpack, rather than a new unit!

  Thank you very much

  Post edited by: Chozbert

  Hi Chozbert

  You are right. You buy a new power adapter. The part number, you can find on the label.

• ENVY 17-K112NL: fan stil running and power led is on after stopping down

  Hello.

  After that windows 10 updated my laptop was not completely down.

  The screen goes black but the fan still works and supply line is turned on. To turn off, I press the power button for 5 sec.

  I tried to update the BIOS to change the BOOT order - doasn can't work.

  Can you halp me?

  Problem solved. Solution found here

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-10-laptop-won-t-go-into-sleep-mode/TD-p/5171069/page/116