A60: Error Message blue screen after the recovery procedure

Similar Questions

• Satellite P20-771: Error Message blue screen after the reinstallation of the OS

  I have a portable Satellite P20-771 / Pentium 4 3.40 GHz (800/HTT) / XP Home / 17' with nVidia Geo5700 driver.

  As I had a few problems with the software, and I reinstalled everything using the supplied CD. Unfortunately the canned computer malfunction sent me blue screen errors, which are due (it comes when I sumbit error to Microsoft) to device drivers. I've updated everything (I hope) of the Toshiba page, but I'm not an expert and I'm worried that I missed something or that something has not been loaded in the right order or that the parameter is incorrect.

  I thank in advance for your help

  Roberto

  Hello

  I read in this forum that the Blues screen error message appears due to hardware malfunction or malfunction serious software.
  Usually after installing the new OS since the portable Toshiba Recovery CD should work properly.
  It is not easy to say why the blue screen appears on you laptop.
  Maybe you can post the content of the error message in this forum, and maybe we will find a solution.

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Receive an error message blue screen with the instruction on what to get but its double all of the Dutch.

  Blue screen

  Keep getting blue screen last message is ' disable or uninstall all defragmentation or anti-virus disk backup, utility-check disk hard configeration and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.   It's all double Dutch to me, maybe someone can help me and tell me in plain English what to do.  Jackson

  Hi minetbeaugoss,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Disconnect all external devices, start the computer and check if the problem persists.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite A100 loads the operating system correctly after the recovery procedure

  Hello

  I'm in trouble... I used the recovery CD last week after my laptop developed problems. After the recovery procedure, when I turn on the pc, it loads directly in mode 'Owner' - the pilot of the internet has no charge, Norton AV, supplied with the pc does not load. Basically, it's a shadow of his former self.

  And when I try and start the recovery process, that it doesn't... it does not read the disc.
  I know that the recovery process did not work properly cos when I look in C: it shows that 60 GB of data is present on the hard disk, so the recovery is not cleaned the hard drive at all.

  The only way I can describe it, is that the pc is in some sort of limbo. I can't access the original account I created.

  The recovery disk is still okay because I "explored" the drive on another computer and it contains all the data.

  Help, please.

  Looks a bit the problem I have with an A100 recovery disk. Mine formatted PC, unpack
  a load of stuff and then freezes.
  See...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31292

  Like you, I can read the DVD in another PC. I wonder if there is a batch of duff of recovery DVD?

  I think I'll try to install XP from a different installation disk. It'll be a bit of a pain in the neck
  because it will not authenticate with MS, but at least he's going to prove whether or not the hardware of the laptop is duff.

  I'll post back here when (if) I get anywhere.

• 8530p blue screen after the awakening of the mode standby.

  Hello.

  Windows 7 Enterprise 32-bit. (EDITED)

  A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

  The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

  According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

  Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

  The online tool, said there is no update available on the BIOS drivers.

  I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

  I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

  So so I need help to find out what software might be behind this error.

  I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

  So is it a known software that could be the cause of these problems?

  EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

  Sorry I have not responded earlier.

  It seems that the problem is solved since the user had no blue screens for over a week now.

  The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

  Best regards

  Ljungan.

• Blue screen after the installation of the Radeon HD 3450 video card driver

  Original title: I get a blue screen on vista after installing the drivers for my radeon HD 3450 graphics card, windows 7 works very well

  Hi all, hoping someone can direct me towards a solution...

  Have a 2.8GHz Celeron RAM 2 GB machine, install videocard ATO Radeon HD 3450 AGP.

  Equipped with Windows Vista 32-bit, install ATI driver from the ATI site, all installs OK but on reboot, we get BSOD.

  HOWEVER, same machine, running Windows 7 Professional, all installs them and works fine! (it is the same driver ATI for Vista and 7).

  We tried a new installation of Vista, even tried Vista business and Enterprise editions. Same results.

  Latest system drivers and not BIOS updated avaialable. Vista installation had Enterprise with SP1 and enterprise with Service Pack 2 included.

  I have google, downloaded ATI drivers, reloaded OS and drivers, and little matter what we try Vista causes BSOD and 7 works very well!

  If we try the latest beta version of the ATI driver, he refuses to detect the card in Vista, everything works fine in Win 7.

  Any suggestions? Please? !!

  Hello

  What is the exact error message you get when the blue screen?
  Step 1:
  Try to start the computer in safe mode. Check out the following link.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  You can try to disable the video card. Follow the steps.
  (a) click Start.
  (b) in the Search tab, type devmgmt.msc and press to enter.
  Expand c) display adapter and right-click on the Radeon HD 3450 video card.
  (d) click on disable.
  (e) now, close the Device Manager window and restart the computer.
  (f) attempt to start the computer in normal mode.
  (g) go to control panel.
  (h) select programs, and then click programs and features.
  (i) select the package for the ATI Radeon HD in the list and uninstall it.
  (j) restart the computer.
  (k) to start the computer in normal mode.
  (l) go to the Device Manager.
  (m) right click on the graphics card.
  (n) to select Properties, and then click the driver tab.
  (o) now click on roll back driver and check with the question.
  
  You can also check out the following link to download and install the two packages from the link.
  
  If you are using Windows Vista 32-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista32.aspx
  For Windows Vista 64-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista64.aspx
  
  You can provide us the mini dump file. We can analyze the mini dumps if make you it available to the Skydive or other file sharing sites (such as Media Fire). If you have problems downloading the mini dumps copy
  for the office or in the Documents folder and download them from there.
  ZIP or download the content of the C:\Windows\minidump
  Use in parachute to download files and post photo/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Blue screen after system recovery.

  HP Pavilion 9070

  Intel q6600 quad

  hard drive 500 GB

  3 GB ram

  Vista premium edition

  _________________________________________________________

  PC works well, until such time as the latter.  Will not load up, try runnning Hp recovery, goes through the recovery of the system and get to the blue vista load up screen, then monitor goes to sleep and wakes up with a blue screen with the message.

  Technical information

  STOP: 0 X 000000116

  Any help glady appreciated.

  Have tried all the components in the case they are all secure.

  My thanks to Jaco, the problem was indeed with the graphics card, he worked through the integrated graphics card.

  Once again thanks a lot

• Qosmio F10 does not work after the recovery procedure

  Hi, I just bought the toshiba recovery dvd for my qosmio laptop f10, I put the dvd in and it goes through the process of recovery and complete 100% he then told me to remove the dvd, and then press CTRL ALT DELETE to restart the computer.

  In doing so, he gets to the screen were it tells me windows startup and then the screen turns white and flickers a couple of times, and then the computer phone re boots and don't stop doing that, I press the F8 key when it restarts to go save mode, but when it starts in mode it tells me that windows is not completely set and goes no further and tells me that I need to run put in place to new.

  I don't have a windows cd only toshiba dvd that should put my laptop back to factory settings.

  Can aynone help me before I have sound toshiba?

  Thank you.

  Hello

  It's not easy to say why it happens. Usually, the Toshiba Recovery CD should work properly and after any recovery procedure, the laptop should run without any problems.
  You suggested that you ordered this CD from recovery of the ASP.
  Do you have the right recovery CD? Check the description of CD.

  The other possibility is that the device has a hardware failure. In this case, you must contact the service of Toshiba. Sorry, but that's all I can suggest.

  concerning

• Satellite T110-121 - blue screen after the installation of recovery

  Hello everyone! My name is Melanie and I want to apologize for my English: I m french! I have big problems on my laptop, I will explain:

  I had to install windows yesteday and I used the partition recovery, all worked but the last seetings, my computer fixed: blue screen. I have it reboot and I can log in on windows, now Toshiba software run at the end of the installation: install wireless and bluetouth BUT this software always get it fixed my computer or my screen is frozen, or screen of blus.

  Then, I removed it from the startep of the software list and tried to install the drivers I found on the Toshiba site but for the wireless, I run the software add anything, and for the bluetooth it says error 2753: setupdiu.exe is not marked for installation.

  So I m really disappointed, could you have some tips to help me please? I thought reinstall windows, but I can't reach the recovery: whose touch is?

  I m looking forward getting help.

  My best,

  Mel.

  Hey,.

  I think that something goes wrong when installing recovery and thus you get a blue screen and can t install the WLAN software. The best option would be to run the recovery process.

  But why you can't reach t recovery more? I mean you can use HARD drive recovery as often as you like and you can start if you enter Windows Advanced Boot menu (press F8 before Windows starts) and choose fix my computer. Select Toshiba HDD recovery, then follow the instructions on the screen. Windows will be reinstalled with all drivers and tools.

  Check this box!

• Blue screen after the suspension/recovery

  Just got a new laptop a few weeks ago. Whenever I take off, it shows the login screen and then immediately blue screens and restarts.

  After the crash dump, the Qualcomm Atheros wifi driver (Qcamainx64.sys) is at fault. It is updated (version 11.0.0.373). It crashes with "unknown error checking code (1 d 3).

  Model: VN7 - 591 G-729V

  OS: Windows 8.1

  What can I do to work around this problem? Can I upgrade or downgrade the driver without having to download a from a Czech site summary? I was not able to find anywhere that I can report the bug of Qualcomm.

  Thank you.

  I think it will be easy for the Acer one of uninstall and install the latest available for your card.

  You can download it here too, 100% reliable Web and direct download:

  http://SMTP.station-drivers.com/index.php/downloads/drivers/Qualcomm-Atheros/WLAN/AR61x4/Qualcomm-at...

• Various recurring error messages blue box when the laptop is idle

  I have a new (10 months) HP Pavilion dv7 - 3165dx running windows 7 home premium 64-bit.  After that laptop sitting idle for a while, the screen goes black with a blue box error message.

  01/02/11-02/14/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Disable or uninstall any antivirus, commercial defragmentation or disk backup.  Check the configuration of the disk hard yoru and check the updated drivers.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Call Technical Support HP - a talked to Josh: I was sent to HP.com support site to download software downloads and the pilot.  Said it is known the problem and had me run the CHKDSK command to automatically solve problems.

  02/16/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure you have enough disk space.  If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.  Try changing video cards.

  Check with your hardware vendor for updates to the BIOS.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000007E (OXFFFFFF800032D3905, OXFFFFF88002B97288, OXFFFFFFFFC0000005, OXFFFFF88002B96AFO)

  Data collection for the crashdump...

  Call the HP Technical Support - talking to Matt: check space drive, and said that it was very good.  Updated graphics driver.  Disabled the hard drive protection.  Power options reset of Hibernate to standby mode.  Update BIOS of F.10 F.15.  Ran test drive: Smart check, DST short and long DST all spent.

  02/17/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  System_Service_Exception

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000003B (...)

  Data collection for the crashdump...

  I don't ' know what to do at this point.  HP phone support seems unable to solve my problem.  Can someone help me?

  Hi DP - K,.

  Thank you for all the helpful tips.  This weekend when I saw my McAFee scan/security reports, even if the McAfee Security Center shows that viruses and spyware works, he did not run a weekly full scan on my laptop since the end of January.  I don't know if he tried to scan and then breaks down, or it will not start.  When I tried to run a manual scan, windows shut down and I got a blue screen error message after about 5 hours of scanning - 63% digital.  When I ran the HP System Diagnostics report, it showed that my Security Center has not recorded an antivirus product.  "The Security Center cannot identify a current antivirus application.  There is no product protection antivirus installed or it is not recognized. "When I ran the HP reliability and history of problem report, it showed that my error messages started on 01/02/11, which is what I remembered.  I was able to restore my laptop to 23/01/11 when I had no problems and then, I uninstalled McAfee security and re-installed software.  I manually ran a full scan and it took 5 hours to complete, it has completed and reported no problems.  I look today and so far, no problem.  If the problem happens again, I will try the suggestion of Avast below.   Thanks again for all your great suggestions.

• Satellite A45-S150 - black screen after the recovery process

  After problems with a virus, I ran the recovery disk and reformat the hard drive and reloaded the OS. When the process pushes me to remove the disc, it begins to restart, but only shows a black screen. I restart the process of recovery only with the same results.

  The laptop came loaded with XP, but that the recovery Application is running, it says it is loading Windows 98. Could the original recovery disc was loaded with the wrong operating system?

  What's next?

  Hey,.

  > I restart the process of recovery only with the same results.
  You can install Windows using a normal Microsoft Windows disk?
  So, you can check if the problem is related to the computer laptop or recovery disk itself.

  > it says that it is loading Windows 98
  Don t worry not about this message. As far as I know it has something to do with the software that allows you to copy the recovery image on your HARD drive. Recovery disk still contains Windows XP ;)